An insight into linear quarter car model accuracy

The linear quarter car model is the most widely used suspension system model. A number of authors expressed doubts about the accuracy of the linear quarter car model in predicting the movement of a complex nonlinear suspension system. In this investigation, a quarter car rig, designed to mimic the popular MacPherson strut suspension system, is subject to narrowband excitation at a range of frequencies using a motor driven cam. Linear and nonlinear quarter car simulations of the rig are developed. Both isolated and operational testing techniques are used to characterise the individual suspension system components. Simulations carried out using the linear and nonlinear models are compared to measured data from the suspension test rig at selected excitation frequencies. Results show that the linear quarter car model provides a reasonable approximation of unsprung mass acceleration but significantly overpredicts sprung mass acceleration magnitude. The nonlinear simulation, featuring a trilinear shock absorber model and nonlinear tyre, produces results which are significantly more accurate than linear simulation results. The effect of tyre damping on the nonlinear model is also investigated for narrowband excitation. It is found to reduce the magnitude of unsprung mass acceleration peaks and contribute to an overall improvement in simulation accuracy.     

浅埋隧道爆破施工中邻近框架结构的振动响应分析

为研究隧道爆破作用下邻近框架结构的振动响应机制，以某5层框架结构住宅楼为例，借助ANSYS/LS-DYNA建立基于隧道爆破-围岩-框架结构的三维耦合数值计算模型，分析隧道爆破施工中邻近框架结构的振动响应。研究结果表明： 数值模拟清晰地展示了隧道爆破作用下围岩和框架结构应力场、位移场的变化情况，给出了爆破振动波从围岩至框架结构的传播过程。通过对比实测测点与数值模拟中对应测点的振动速度时程曲线和频率分布，验证了数值模拟方法的可靠性。在隧道爆破作用下，邻近框架结构梁、柱以及外墙等构件的振动响应并不一致，随结构高度呈现出不同的变化规律。此外，应力集中现象主要发生在建筑物底层外墙、外墙与柱结合处、外墙与梁结合处以及外墙与楼板结合处等非承重部位，表明这些部位更易在隧道爆破过程中发生损伤开裂。     

高速铁路进站节能坡设计方法研究

在线路纵断面的设计中引入节能坡设计理念,对优化线路纵断面设计、降低牵引能耗值和节省运营支出具有重要意义。根据高速铁路的特点,提出高速铁路进站节能坡的设计方法和计算算法,给出计算流程,确定各影响参数的约束条件。开发进站节能坡设计程序模块,实现多参数化的进站节能坡设计。在此基础上,采用计算机仿真分析方法,对车站坡段坡度、车站中心至节能坡变坡点距离、动车组编组质量、进站制动力使用系数、节能坡进入初始速度5个主要影响因素进行计算和仿真分析,确定各因素对进站节能坡的影响程度,为进站节能坡的设计提供参考和依据。     

车用发动机扭转振动的分析与控制

基于扭转振动的基本原理,对发动机两种类型的扭转振动减振器的设计计算做深入的陈述.结合两款有针对性的发动机,对所要计算的基本参数及该参数所要限定的范围作了具体说明.最后用本公司自主开发的发动机扭振分析软件对一款发动机进行模拟计算,并与试验测量结果进行对比分析,并证明计算的结果是准确可靠的.     

Influence of priority taking and abstaining at single-lane roundabouts using cellular automata

Existing roundabout simulation models fail to consider all types of driver behavior which compromises their accuracy and ability to accurately evaluate roundabout performance. Further, these non-compliant driver behaviors, including priority taking and priority abstaining, are inconsistent with existing traffic flow theories. In this paper, a new cellular automata model, C.A.Rsim, is developed and calibrated with field data from five single-lane roundabouts in four northeastern states. Model results indicate that approximately 20% of the individuals in the driver population are inclined to priority taking and approximately 20% are inclined to priority abstaining behavior, though the observed levels of these types of behavior are naturally lower and vary with traffic volume. The model results also corroborate other research indicating that current models can overestimate capacity at higher circulating volumes, possibly a result of the jamming effect produced by priority taking behavior. The reduction in priority abstaining behavior, which is observed at older roundabouts, significantly reduces delay and queue length in certain traffic volumes. C.A.Rsim is also more parsimonious than many existing microsimulation models. These results provide insight on how variations in conflicting flow (i.e., traffic volume and turning movement balance) impact the amount of observed non-compliant behavior.     

基于VB的测控装备模拟训练系统设计及实现

系统采用计算机仿真技术、系统仿真技术、网络技术、串口通信技术，介绍了该系统特点、组成和关键技术，并针对关键技术问题作了深入细致的探讨，给出了解决该问题的途径。     

机械法联络通道施工自动导向及监测技术

机械法施工作为当今联络通道施工的发展方向,一方面因测量通道空间狭小和测站不规则位移等原因,其施工导向测量手段仍然停留在人工测量阶段,降低了机械法的施工效率;另一方面为掘进面附近受力管片的位移监测也多为人工方法,难以满足监测时效性的需求。为了同步解决机械法联络通道施工导向测量和监测的问题,开发了一套机械法联络通道自动导向系统。该系统基于高精度光纤陀螺的指北原理,采用光纤陀螺与双轴倾斜仪和目标棱镜组合构成导向靶,通过巧妙布设的基准棱镜和监测棱镜,在自动导向的同时也能够实现管片位移监测。     

新建管道施工对近距离既有隧道的影响及安全风险评估

以某上跨既有铁路隧道的输气管道施工项目为依托,对近距离涉铁工程建设影响进行综合分析。通过有限元数值模拟,分析管道施工各工序对既有隧道的受力影响,得到天然气管道及防护涵的施工对东龙山隧道稳定性基本无影响的结论。同时,采用专家调查法对既有隧道运营阶段的安全风险进行评估,认为管涵施工引起的安全风险可忽略,并提出相关风险控制措施。     

基于BIM的三维铁路路基建模应用研究

为推进铁路工程建设信息化发展,铁路设计行业大力推进BIM技术研究。通过对现阶段铁路站前专业BIM技术应用实例和路基二维辅助设计方法的广泛调研,提出一种基于运用自主研发的三维铁路路基辅助设计软件的建模方法,结合川藏线拉林段路基区间,完成建模流程和设计成果的展示。实践表明,三维设计有助于设计人员更为全面直观了解实际工程结构,新增可视化效果,提高设计精确性,为铁路路基设计行业带来新的设计理念和运用基础。     

铁道车辆轴箱弹簧断裂故障对动力学性能的影响

车辆运行过程中,当轴箱弹簧突发断裂故障,会造成动力学状态和性能突变,一系悬挂刚度突然减小,暂时失去承载能力,会威胁车辆行车安全。结合整车的动力学仿真,建立了轴箱弹簧断裂过程的力学模型,对整个断裂过程进行仿真,模拟了轴箱弹簧突然断裂工况下车辆动力学性能变化,分析了轴箱弹簧断裂条件下车辆直线行车安全性以及曲线通过安全性。计算分析结果表明:轴箱弹簧突然断裂导致一系悬挂刚度剧变,引起轮轨垂向力先减小后增大,轮重减载率、脱轨系数等参数增大直至超限,但对轮轨横向力影响不大。