相继增压系统对改善船用直列八缸发动机性能的试验研究

随着大型柴油发动机经济性和排放要求的不断提升,以及对发动机稳态、瞬态特性要求的不断提高,传统的涡轮增压系统已无法满足船用发动机全工况性能的要求。为了提高产品竞争力和适配性,针对某8缸直列船用柴油发动机开发了带有定压排气管的相继增压系统,并进行了发动机台架试验研究。结果表明：发动机中、低转速时,相继增压系统使发动机比油耗可以下降5%-10%,排气温度降低30%-45%,烟度下降55%-60%；最大扭矩可以提升15.1%-36.4%；发动机最大扭矩转速工况突加突卸响应性提升约28%-29%；相继增压系统中定压排气管的设计使得发动机高工况性能也有所提升,从而实现发动机全工况性能的提升。     

A generic data assimilation framework for vehicle trajectory reconstruction on signalized urban arterials using particle filters

With trajectory data, a complete microscopic and macroscopic picture of traffic flow operations can be obtained. However, trajectory data are difficult to observe over large spatiotemporal regions—particularly in urban contexts—due to practical, technical and financial constraints. The next best thing is to estimate plausible trajectories from whatever data are available. This paper presents a generic data assimilation framework to reconstruct such plausible trajectories on signalized urban arterials using microscopic traffic flow models and data from loops (individual vehicle passages and thus vehicle counts); traffic control data; and (sparse) travel time measurements from whatever source available. The key problem we address is that loops suffer from miss- and over-counts, which result in unbounded errors in vehicle accumulations, rendering trajectory reconstruction highly problematic. Our framework solves this problem in two ways. First, we correct the systematic error in vehicle accumulation by fusing the counts with sparsely available travel times. Second, the proposed framework uses particle filtering and an innovative hierarchical resampling scheme, which effectively integrates over the remaining error distribution, resulting in plausible trajectories. The proposed data assimilation framework is tested and validated using simulated data. Experiments and an extensive sensitivity analysis show that the proposed method is robust to errors both in the model and in the measurements, and provides good estimations for vehicle accumulation and vehicle trajectories with moderate sensor quality. The framework does not impose restrictions on the type of microscopic models used and can be naturally extended to include and estimate additional trajectory attributes such as destination and path, given data are available for assimilation.     

一种商用车铅酸蓄电池状态监控系统的开发

本文介绍一种商用车铅酸蓄电池状态监控系统的开发,系统实现蓄电池传感器实时采集蓄电池状态参数信息,并通过TBOX将数据上传至后台服务器,进行数据存储分析及报警判断,并将亏电报警信息推送给手机客户端,提醒用户注意。同时,系统根据蓄电池SOC值的限值判断,进行电磁开关的切断控制,以保证车辆的正常起动。     

Plate scanning tools to obtain travel times in traffic networks

The management of vehicle travel times has been shown to be fundamental to traffic network analysis. To collect travel time measurement, some methods focus solely on isolated links or highway segments, and where two measurement points, at the beginning and at the end of a section, are deemed sufficient to evaluate users' travel time. However, in many cases, transport studies involve networks in which the problem is more complex. This article takes advantage of the plate scanning technique to propose an algorithm that minimizes the required number of registering devices and their location in order to identify vehicles candidates to compute the travel times of a given set of routes (or subroutes). The merits of the proposed method are explained using simple examples and are illustrated by its application to the real network of Ciudad Real.     

Travel time estimation oriented freeway sensor placement problem considering sensor failure

Optimal sensor placement on freeway corridor is of great interest to transportation authorities. However, current traffic sensors are easily subject to various failures. Therefore, it is necessary to incorporate sensor failure into the optimal sensor placement model. In this article, a two-stage stochastic model is proposed for the purpose of travel time estimation on freeway corridor. To balance the effectiveness and reliability, a stochastic conditional value at risk (CVaR) model is also proposed. Since both models are too complicated, a customized genetic algorithm is developed. Numerical experiments show that considering sensor failure makes a significant performance improvement in the sensor placement pattern. Sensitivity analysis is also applied to investigate the impact of a number of allowable sensors and different traffic sensor failure probability.     

基于动态聚簇结构的无线传感网络在海上通信中的应用

无线传感网络在海上无线通信系统中的应用越来越广泛,而受到海上环境的影响,网络的能量消耗及生命周期是衡量海上无线传感网络最重要的性能参数。传统无线传感网络的数据传输在单个节点之间进行传递,效率较低,而现有的基于簇结构的无线传感网络,把传感网络中的所有传感器节点按照一定的逻辑结构进行划分,增加了系统的传输效率。本文在研究现有的无线传感网络基础上,提出一种基于动态聚簇结构的无线传感网络,并进行仿真。     

基于无线传感器网络的运动目标检测动态聚类图

有效的目标跟踪需要积极的传感器节点对运动目标群实行跟踪。与单目标跟踪相比,聚类在效能上有显著提高。本文提出准确的相干和非相干运动模式下目标的聚类,采用隐式动态时间框架来评估在创建连接组件加权图的目标关系史。该算法采用目标跟踪中定位算法的关键特征,即估计当前和预测的位置来确定移动目标的方向和距离的关系。模拟结果显示,通过动态调整历史窗口大小和预测目标之间的关系,可以显著提高聚类的准确性并减少运算时间。     

高精度电涡流测微系统的研究

在介绍电涡流传感器工作原理及系统构成的基础上,提出了一种基于矩形域最小二乘曲面拟合算法进行温度补偿的方法,利用DSP进行数据的采集和处理,通过建立温度间距频率之间的数学模型,实现了电涡流测微系统在高精度微位移测量领域中的应用。实例表明所建模型是合理的,该方法是行之有效的。     

Application of frequency estimation algorithm based on a single vector sensor in underwater acoustic communication

1 Introduction1 An acoustic vector sensor (AVS) simultaneously measures the acoustic pressure and the components of acoustic particle velocity which render the basis for developing new signal processing methods[1-2]. The higher processing gain can be obta…     

风浪中螺旋桨水动力变化的实用计算方法

风浪中螺旋桨水动力变化规律是研究舰船在风浪中速航性能的重要方面。本文参照有关文献,提出了一种计算风浪中螺旋桨推力、转矩损失的实用定量计算方法,既可用于较精确地估算舰船在风浪中的增阻和失速,还可供提高舰船在风浪中速航性的研究和螺旋桨设计参考。