How well a single-track linear model captures the lateral dynamics of long combination vehicles

ABSTRACT

The effect of centre-of-gravity heights on the high-speed performance measures of long combination vehicles including truck with double centre-axle trailers, Nordic, and A-double combination vehicles is investigated. The high fidelity three-dimensional models, used in this research, are validated against physical test data. These models are often accurate in terms of the actual dynamic behaviours of the vehicle. On the other hand, the simple yaw-plane single-track models with linear tires require less number of vehicle parameters. In this paper, it is investigated how accurate the estimations of performance measures are at high forward speeds by such single-track linear (STL) models. The influence of load height is especially studied. The high-speed performance-based standard or PBS measures considered are rearward amplifications of both lateral acceleration and yaw velocity; lateral load transfer; yaw damping and high-speed transient offtracking. The results show that tire relaxation has a large effect and it is rather easy to add to an STL model, so it is assumed to be modelled in STL. With realistically high payload and a required accuracy of PBS measures of approximately 10%, only the accuracy of rearward amplification of yaw velocity calculated by the frequency response is fulfilled by the STL. With low payload, the same statement is valid, but with around 5% in required accuracy. The roll dynamics effects are more important than the tire non-linearities.     

如何提高路基分层压实系数一次验收合格率

通过包西铁路通道陕西段路基土方填筑施工过程的实践,分析总结影响路基分层压实系数一次验收合格率的多种因素,有针对性地制定相应工程措施,指导施工生产。     

船舶应急电系统受控的逻辑关系

为加强轮机人员对电力系统知识的掌握,根据现代大型集装箱船电力系统的特点,详细介绍了船舶应急电系统受控的逻辑关系,特别指出联络开关的意义和作用,可为船舶电站设计、轮机设备维护管理及故障分析提供指导。     

车市波动规律的新发展

为分析中国车市当前发展趋势，给汽车产销单位和领导机关决策提供参考，文章采用“车市波动分析法”，从宏观经济与车市波动关系入手，进行数据处理，作出车市波动图和数据表。分析研究后得出以下结论：中国车市2009年底已进入“第6次扩张高峰期”，达到创纪录的新水平，但后继波动恐难避免。文章根据中国车市发展实际提出波形组成内容变化新建议。     

交直传动相控电力机车过电压保护参数的合理匹配

交直电力机车分别在牵引绕组和整流器元件设置阻容吸收电路以降低操作过电压和换流过电压，探讨了二者在整流器工作过程中的相互作用与影响，当参数选配不当，会造成二极管关断损坏和晶闸管开通损坏，阻容器件也会出现烧损故障；指出当前运用机车普遍存在绕组阻容参数失配情况，以致晶闸管故障率高，阻容器件烧损严重，提出满足各种机车过压保护的优化调整方案。     

30年来中国轿车市场的5次波动

系统论述了中国轿车市场1978--2008年发生的5次波动。通过对前4次波动的研究，提出了新的车市研究方法体系一车市波动分析法，该方法成功预报了第5次波动期的主要阶段。详细介绍了轿车市场第5次波动期的全过程，分析了中国轿车市场波动规律的“井喷”和“余喷”现象，以及2009--2010年轿车市场发展趋势。     

汽车载质量利用系数公告申报管理合理上限研究

目前汽车企业申报"小吨大标"车越来越多,严重地影响到车辆的行驶安全。本文通过三辆车的试验结果分析载质量利用系数的合理上限值,以限制"小吨大标"车的申报,为相关管理部门提供参考。     

牵引模式对C0-C0架悬式机车粘着性能的影响

分析了牵引模式对C0-C0架悬式机车粘着性能的影响.通过对牵引装置不同布置方式进行比较,指出机车的轴重转移量以车体中央截面成对称分布,对应轮对上的粘着质量利用率之和为定值;并提出牵引点高度对机车粘着性能影响较大,而牵引装置布置方式对其影响较小,机车设计时需根据悬挂特性选择合适的牵引点高度.     

关于码头工艺设计中不平衡系数的研究

利用数据实例,说明不平衡系数的计算方法应该在相关规范中做出明确规定,一些问题需要通过进一步的研究加以解决.     

Theoretical and experimental excitation force spectra for railway-induced ground vibration: vehicle–track–soil interaction,irregularities and soil measurements

Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses – the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle–track–soil interaction – have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle–track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave.