城市独柱墩桥梁抗倾覆加固改造设计探讨

独柱墩桥梁具有结构轻巧、占地少等优点,被广泛应用在城市立交和高架上,近年来,随着独柱墩桥梁倾覆事故频繁发生,独柱墩桥梁结构的稳定性问题越来越受到桥梁管理者的重视。本文结合南京市独柱墩桥梁抗倾覆加固改造的工程实践,对不同桥型进行加固改造方案比选,优化抗倾覆加固设计。     

Multi-objective re-synchronizing of bus timetable: Model,complexity and solution

This work is originally motived by the re-planning of a bus network timetable. The existing timetable with even headways for the network is generated using line by line timetabling approach without considering the interactions between lines. Decision-makers (i.e., schedulers) intend to synchronize vehicle timetable of lines at transfer nodes to facilitate passenger transfers while being concerned with the impacts of re-designed timetable on the regularity of existing timetable and the accustomed trip plans of passengers. Regarding this situation, we investigate a multi-objective re-synchronizing of bus timetable (MSBT) problem, which is characterized by headway-sensitive passenger demand, uneven headways, service regularity, flexible synchronization and involvement of existing bus timetable. A multi-objective optimization model for the MSBT is proposed to make a trade-off between the total number of passengers benefited by smooth transfers and the maximal deviation from the departure times of the existing timetable. By clarifying the mathematical properties and solution space of the model, we prove that the MSBT problem is NP-hard, and its Pareto-optimal front is non-convex. Therefore, we design a non-dominated sorting genetic (NSGA-II) based algorithm to solve this problem. Numerical experiments show that the designed algorithm, compared with enumeration method, can generate high-quality Pareto solutions within reasonable times. We also find that the timetable allowing larger flexibility of headways can obtain more and better Pareto-optimal solutions, which can provide decision-makers more choice.     

浅析BIM技术应用收费标准

上海市、广东省、湖南省等地发布了关于BIM技术应用的地方性收费标准,有助于加速BIM技术市场化,但这些标准不够完善。通过对已发布的相关收费标准进行梳理,分析认为按建筑面积计费可能存在投入与收取费用偏差大、调整系数取值不确定性大等不足。希冀本研究成果为新制订或完善相关标准、工程造价与审计认定等工作提供参考。     

机场道面钻芯劈裂强度的尺寸效应系数

通过对比相同配合比下的室内标准模制圆柱体混凝土试样与现场试验板钻芯标准芯样之间的劈裂强度,探讨了钻芯取样测试对劈裂强度的影响;通过对不同长度芯样的劈裂强度进行对比,研究了试样长度对芯样劈裂强度的影响规律。结果表明:由于钻芯过程产生的损伤及试验板与模制圆柱体试件的混凝土拌和、振捣、养护条件不同,导致钻芯法测得的混凝土劈裂强度相比室内试验降低15.7%;另外由于圆柱体试件的长度增加,混凝土试件的受力平面也随之增大,平面内存在的微裂缝、微孔洞的数量也会随之增多,导致随着试样长度的减小,测得的试样劈裂强度逐渐增大。最终得出国内某通用机场新建飞行区工程的劈裂强度与长度的修正系数。     

Gantry crane operations to transfer containers between trains: A simulation study of a Spanish terminal

Freight transfer operations are critical in combined transport networks. In this paper a simulation model and modelling approach to the transfer of cargo between trains at rail terminals is presented. The model is used to study the Port-Bou terminal, the main intermodal terminal at the Spanish-French frontier. Four different gantry crane operation modes to interchange containers between trains are evaluated. These operation rules are tested in several scenarios to examine the critical factors of the system and the best operation rule for each situation. Latest generation software is used to develop the model that incorporates modular programming and enhanced graphic systems for output representation. It allows a dynamic display of the simulated system and, likewise, the possibility of developing modules that can be reused in other studies. The research shows how simulation can be a useful planning tool in the rail transportation context.     

Dynamic model for the wheel–rail contact friction

Accurately estimating the coefficient of friction (CoF) is essential in modelling railroad dynamics, reducing maintenance costs, and increasing safety in rail operations. The typical assumption of a constant CoF is widely used in theoretical studies; however, it has been noticed that the CoF is not constant, but rather depends on various dynamic parameters and instantaneous conditions. In this paper, we present a newly developed three-dimensional nonlinear CoF model for the dry rail condition and test the CoF variation using this model with estimated dynamic parameters. The wheel–rail is modelled as a mass–spring–damper system to simulate the basic wheel–rail dynamics. Although relatively simple, this model is considered sufficient for the purpose of this study. Simulations are performed at a train speed of 20 m/s using rail roughness as an excitation source. The model captures the CoF extremes and illustrates its nonlinear behaviour and instantaneous dependence on several structural and dynamic parameters.     

����ϵ�����ڳǼʸ�������������е�Ӧ��

高速铁路为人们提供了一种高效的运输方式.本文借鉴弹性系数法的相关理论,首先运用广义费用函数测算样本中高铁开通前后两地区综合客运成本的变化,结合两地区高铁开通前后客运量的变化得到了运输成本弹性系数,用于衡量两地区对于高铁开通的迫切性程度,从而在另一个层面衡量高铁建设的可行性.然后根据运输经济学及新经济地理学的相关理论,从人口、距离、人均GDP差异、平均人均GDP和产业结构相似度5个维度对样本的运输成本弹性系数进行建模,运用神经网络的方法来拟合其对运输成本弹性系数的影响情况,并以此为依据来测算北京市和张家口市对即将开通的京张高铁的迫切性程度.     

双螺旋折流板换热器最佳螺旋角的研究

为了研究换热器的传热性能与双螺旋折流板换热器的螺旋角的关系，通过建立多个不同螺旋角的管壳式换热器模型，运用数值计算的技术手段对其进行模拟，并对其数值模拟结果进行对比分析。结果表明：双螺旋折流板换热器存在最佳螺旋角使得换热器的换热性能最优。相同换热器结构的条件下，壳程进口流量对双螺旋折流板换热器的最佳螺旋角没有影响。随着壳径的增大，双螺旋折流板式换热器的最佳螺旋角有下降趋势。     

基于加权Kendall相关系数和序贯代理模型的有限元模型修正

为了提高桥梁结构有限元模型修正的效率和效果，提出基于加权Kendall相关系数和序贯代理模型的有限元模型修正方法。首先，建立基于目标响应误差和待修正设计参数灵敏度的加权Kendall相关系数指标，并采用凝聚层次聚类算法，合理确定待修正设计参数的数量和位置，保证待修正设计参数对目标响应具有合适的解耦能力；其次，为解决传统一次性代理模型法在构造代理模型过程中产生的欠采样或者过采样的问题，采用基于FLOLA-Voronoi通用序贯设计策略的序贯代理模型法，提高构造代理模型过程中试验设计样本的利用率和模型修正效率；最后，根据一座斜拉桥的静动力荷载试验数据进行有限元模型修正。结果表明：基于FLOLA-Voronoi算法的序贯代理模型能够合理地确定构造代理模型所需的样本数量和位置，使得在相同样本数量的情况下，序贯代理模型比一次性代理模型具有稍好的精度指标；采用加权Kendall相关系数指标的聚类方法可以得到具有合适解耦能力的待修正设计参数，使得修正前大误差目标响应的误差显著下降，小误差目标响应的误差基本都处于合理范围内，有效地降低了目标响应的整体误差；同时，有限元理论静动力响应与实测静动力响应的平均误差分别由5.56%、8.43%降低至1.87%、3.41%，并且相较于常规方法，修正精度更好，所提方法可以用于桥梁结构有限元模型修正，可得到准确的桥梁结构数值模型。