客运专线无砟轨道系统设计

根据我国客运专线的工程特点,无砟轨道结构选型应遵循施工性、维护性、动力性、适应性和经济性的5个基本原则,并给出2类无砟轨道的性能.在研究确定无砟轨道设计理论和原则的基础上,建议设计轮重取静轮重的3倍、疲劳检算轮重取静轮重的1.5倍.板式无砟轨道不同弹性模量的砂浆垫层对轨下基础刚度的影响不同,建议研发新型填充层材料.合理确定无砟轨道的弹性,建议轨下基础刚度的合理范围为20～30kN·mm-1.通过定期打磨钢轨和钢轨无缝化,降低噪音;通过降低轨道刚度、提高轨道参振质量,降低线路下部结构物的振动.无砟轨道的设计寿命应为60年,为此应制定相应的维修标准和管理办法.     

基于柔刚体模型的高速车轮振动辐射噪声研究

随着轨道车辆速度的不断提升,其运行噪声已成为城市噪声的主要来源之一,在传统的动力学模型基础上,引入了柔性轮对模块,将车轮辐射噪声与模态结合起来,并对车轮结构进行优化设计,以期为低噪声车轮的研究提供参考依据。     

应用空间有限元模型进行船舶总振动特性的研究

本文以17500吨货船“海建”号为实例研究应用空间有限元模型计算船舶总振动的方法。对于实际船舶结构中的板,提出用平面应力元简化,以减少计算自由度数,由此产生的问题采用节点主从关系的方法解决。在编制的计算程序中,根据质量矩阵高度稀疏的特点,采用了稀疏存储技术,从而使船舶整体空间模型的振动分析能在国产中小型机器上实现。实例计算结果和测量结果的比较表明,这种计算模型合理、可靠。本文还对船舶总振动计算的梁模型、平面有限元模型、空间有限元模型作了比较和讨论。     

新型避振穴研究

本文提出了一处新型避振穴。由于摒弃了橡胶弹性元件，该避振穴的结构简单，施工与维护方便。还介绍了模型试验结果，阐述了减振原理与应用前景。     

用GPS技术建立城市测量控制网的试验研究

本文以广德ＧＰＳ网为试验对象，对于中等精度ＧＰＳ测量的建网方法、基线向量的解算、卫星网与地面网的配置等问题进行了研究，取得了对生产实践有益的结论。     

集装箱船弯扭耦合振动分析

本文基于薄壁结构力学基本理论，提出了一种适合于大开口集装箱船弯扭耦合振动分析的薄壁梁有限元模型。该模型考虑了翘曲、剪切及剖面转动的影响，以及货舱大开口和抗扭箱（甲板梁）引起的结构不连续性。其例中，计算结果与三维有限元分析结果、模型试验结果相当吻合，而薄壁梁有限元的计算效率要高得多，算例还表明抗扭箱（甲板梁）对提高集装箱船的抗扭刚度有十分重要的意义。     

船尾桨前垂向整流鳍的减振机理研究及其应用

文章认为在船尾型线设计中若不考虑横剖线的UV度、各水线去流角大小等对船体振动的不利影响,很可能会导致艉部水流异常;螺旋桨盘面处非定常及分布不均匀的艉流将直接导致船体剧烈振动.针对发生了该类有害振动的船舶,介绍一种安装于船尾的垂向整流鳍.通过引用水动力不平衡导致螺旋桨激振力产生的基本原理,探讨垂向整流鳍整流使螺旋桨盘面处原艉流场发生有利改变的实质,揭示船尾桨前垂向整流鳍的减振机理.以实例说明该整流鳍在消除该类振动方面的突出效果.     

Three-dimensional vortex-induced vibrations of a circular cylinder predicted using a wake oscillator model

This paper reports a numerical study based on a wake oscillator model, to determine the three-dimensional vortex-induced vibration (VIV) responses on a flexible cylinder with pinned-pinned boundary conditions subjected to a uniform flow. Four different aspect ratios have been selected for the study. The coupling equations of the structural oscillator models and wake oscillator models in both the cross-flow (CF) and in-line (IL) directions have been solved using a standard central difference method of the second order. The structural displacement, structural frequency, response wave pattern, response trajectory, and lift force coefficient, for four aspect ratios, have been compared. The numerical results establish that, for a small aspect ratio, the CF displacements have absolute standing wave behaviors without travelling wave behaviors, and the IL displacements have dominant standing wave behaviors with slight travelling wave behaviors. Further, the VIV trajectory is repeatable and displays figure-eight shapes. However, for a large aspect ratio, the CF displacements display identical characteristics with the IL displacements for a small aspect ratio, and the IL displacements for a large aspect ratio are simultaneously dominated by standing and travelling wave behaviors. Moreover, the VIV trajectory is apparently aperiodic and shows chaotic shapes.     

Experimental investigation on vortex-induced force of a Steel Catenary Riser under in-plane vessel motion

A method to identify vortex-induced forces and coefficients from measured strains of a Steel Catenary Riser (SCR) undergoing vessel motion-induced Vortex-induced Vibration (VIV) is proposed. Euler–Bernoulli beam vibration equations with time-varying tension is adopted to describe the out-of-plane VIV responses. Vortex-induced forces are reconstructed via inverse analysis method, and the Forgetting Factor Least Squares (FF-LS) method is employed to identify time-varying vortex-induced force coefficients, including excitation coefficients and added mass coefficients. The method is verified via a finite element analysis procedure in commercial software Orcaflex. The time-varying excitation coefficients and added mass coefficients of an SCR undergoing vessel motion-induced VIV are investigated. Results show that vessel motion-induced VIV is excited at the middle or lower part of the SCR and in the acceleration period of in-plane velocity, where most of the excitation coefficients are positive, while during the deceleration period, the excitation coefficients becomes too small to excite VIVs. Parameter γ [1] has strong correlation with excitation coefficients. In addition, time-varying tensions contribute significantly to the variations of added mass coefficients under the condition that the ratio of dynamic top tension to pretension exceeds the range of 0.7–1.3. Moreover, chaotic behaviors are observed in vortex-induced force coefficients and are more evident with the increase of vessel motion velocity. This behavior may attribute to the randomness existing in in-plane velocity and its coupling with out-of-plane vibrations.     

三体船粘压阻力预报方法

三体船快速性的研究是三体船新船型开发技术的支撑。通过模型试验与数值模拟相结合的方法,对不同航速下三体船的粘压阻力进行计算。试验研究采用将三体船侧体分别放置在船中、船前部和船后部3个不同的纵向位置以及距船中心线3个距离不同的横向位置,测量9个侧体位置下三体船在静水中的总阻力。运用第八届ITTC公式计算摩擦阻力系数,进而算出剩余阻力系数。通过数值模拟的方法,基于细长体理论对三体船兴波阻力系数进行计算,再根据三因次换算方法计算粘压阻力系数。得出不同构型下三体船在静水中的粘压阻力系数,并作出其随Fr数变化的曲线,观察在侧体位置不同的情况下,三体船的粘压阻力系数随航速变化的规律。根据所得粘压阻力系数曲线,提出初步预报三体船粘压阻力系数的一种简单方法。