城市混凝土道路常见裂缝的成因分析与防治

该文将造成混凝土路面开裂的原因进行归类分析,并提出了相应的预防措施和几种常用的治理方法。     

改进的水泥混凝土路面温度应力系数经验公式表达

现行规范水泥混凝土路面的温度应力系数需要人工查图读取，不可避免地存在主观性，也不利于计算机技术的应用。通过查图读取数据，应用双线性函数、一般化的二次方程、以及其他简单函数拟合，得到了含有13个常量的改进的温度应力系数Bx经验公式。分析表明，基于查图数据，对应99％的保证率，使用公式引起的温度疲劳应力的误差不超过水泥混凝土弯拉强度的1％。公式对温度应力系数的解析描述，不但克服了查图的缺点，也为进一步的研究工作准备了条件。     

影响沥青路面平整度因素分析及处治措施

从影响沥青路面平整度的各个方面查原因、找对策,总结对道路施工平整度的控制,特别是沥青路面施工平整度控制的经验,为公路设计和施工提供一定的参考.     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

Mobile phone use while driving: public opinions on restrictions

This paper reviews two road-user surveys on the use of mobile phones on the road in Finland where the mobile phone ownership rate is highest in the world (70% in August 2000). From 1998 to 1999 the proportion of drivers that chose to use a mobile phone while driving rose from 56% to 68%, while the proportion of phone using drivers who experienced dangerous situations due to phone use rose from 44% to 50%. The proportion of drivers who used their phones in some way to benefit safety on the road remained at about 55%. The youngest, novice drivers had the highest level of phone usage of all age categories. Over 48% of the interviewees believed that the government should ban the use of hand-held mobile phones while driving, and another 27% believed that all types of mobile phone use should be banned while driving. Those drivers who used their phones the most each day were more likely to want some form of restrictions, than those who had lower usage. This is a strong message to the elected lawmakers and raises the problem of exactly how regulatory bodies would go about controlling the future growth of new driver support and non-driving related communication devices in road vehicles. It was concluded that legislating for hands-free use only would be a reasonable course of action. Mandating that the current generation of equipment should be optimized for hands-free use should result in future generations of in-vehicle equipment also being optimized for hands-free use as a minimum criterion.     

盐渍土地区公路边坡的生物防护

结合实践经验论述了盐渍土地区公路边坡生物防护技术的意义,介绍了公路边坡生物防护的主要模式、护坡植物的选择原则以及主要的护坡植物类型。     

豫西农村公路的选择——水泥砼路

修建水泥砼路面具有施工方便，后期养护成本低，经济适用等优点，是豫西山区农村公路的最佳选择。     

杭州城市交通拥挤现状及对策

在分析杭州市交通供需现状的基础上,提出了规划多中心结构和混合功能区,以减少不必要的出行以及合理配置交通源,并对改善中心区交通提出切实可行的对策。     

Japanese perspective of driver information systems

A perspective view of of Japanese R&D activities of Driver Information Systems is given from the standpoint of developing joint projects by public and private sectors. First, a brief history of the R&D activities is illustrated from above mentioned standpoint. Then, two major projects, AMTICS and RACS, and the social backgrounds of these projects are explained. In order to give a clear idea of both projects some technical details are treated.Based on the history and the present status of the developments, the basic design conceptions of Japanese Driver Information Systems are explained and several factors or reasons which have influenced to the design conception are discussed. Then, the promoting systems of the R&D activities are generally explained and present status of the projects and future problems in developing more advanced systems are also handled. A brief discussion on the establishment of international standard is also mentioned as a final comment.