超声波流量计探头参数的选择

以时差法为例,分析了超声波探头中超声射线入射角及振荡频率对测量精度的影响,给出了探头的选择原则。     

高密度电法在某铁路隧道检测中的应用

文章以京包线旗下营隧道工程为例,通过比较高密度电法与地质雷达法酮优劣,提出采用高密度电法进行隧道病害检测,并总结了在应用高密度电法前应进行的准备工作,阐述了高密度电算法在现场检测时的具体操作方法和注意事项。     

埋地管道防腐层破损点检测技术综合应用研究

对防腐层完整性检测尤其是对防腐层破损点的精确定位,及对检出大、中面积破损点开挖修补,是确保土壤跟管道的有效绝缘、提高阴极保护效果的关键。文中分析了常用埋地钢质管道防腐层破损点检测技术特点,结合现场检测实践,综合应用多种技术,能有效检测埋地钢质管道防腐层破损点。根据测量数据可以判断破损点大小以及是否开挖修理,在管道安全运行及检测的经济性之间寻找结合点。     

一种新型在线长输管道管体检测技术

文中介绍一种以磁应力为原理的检测技术,即磁力断层摄影检测技术.该技术是一种非接触式的被动检测技术,可以检测出长输管道管体各类型缺陷.首先简单阐述了检测原理,其次详细说明了执行一次检测的全流程工作步骤,以及各步骤的工作内容,然后简要介绍了其独特的经验性计算MAOP和剩余寿命的公式,接着以实际试点检测工作为例,说明了该技术的可行性,最后指明了该技术的优缺点.     

岩溶隧道瞬变电磁三维超前探测技术研究

针对岩溶发育地区隧道开挖时现有地质预报技术对岩溶突水较难做出准确预测的问题,设计出大断面三维多匝小回线瞬变电磁探测技术。依据岩溶发育特点,采用数值模拟方法对隧道掌子面前方25 m和50 m处不同体积富水溶洞进行模拟,研究掌子面前方不同距离和规模的低阻异常体瞬变电磁响应特征。基于数值模拟结果,在张吉怀铁路古丈隧道岩溶发育段进行探测验证,结果表明： 1）溶洞模型在二维视电阻率等值线断面图上25 m和50 m处形成闭合、视电阻值小于60 Ω·m的低阻区,低阻区与设计的模拟体的位置和范围一致; 2）大断面三维多匝小回线瞬变电磁探测三维显示结果与现场实际揭露情况基本吻合,采用该技术能够准确预报掌子面前方17~30 m、隧道两侧20 m到隧道中轴线的充泥含水溶洞。     

Probabilistic multi-aircraft conflict detection approach for trajectory-based operation

Conflict detection (CD) is one of the key functions used to ensure air transport safety and efficiency. In trajectory-based operation (TBO), aircraft are provided with more flexibility in en route trajectory planning and more responsibility for self-separation. The high flexibility in trajectory planning enables random changes in pilot intent, thus increasing the uncertainty in trajectory prediction and CD. This study proposes a novel probabilistic CD approach for TBO in which the uncertainty of pilot intent is taken into account by quantifying the aircraft reachable domain constrained by the flight plan. First, a probabilistic model for aircraft trajectory prediction is developed using the truncated Brownian bridge method. Based on this model, a novel conflict probability estimation method is developed. Finally, the performance of the proposed probabilistic CD approach is demonstrated through an illustrative air traffic scenario.     

Assessing the impact of reduced visibility on traffic crash risk using microscopic data and surrogate safety measures

Due to the difficulty of obtaining accurate real-time visibility and vehicle based traffic data at the same time, there are only few research studies that addressed the impact of reduced visibility on traffic crash risk. This research was conducted based on a new visibility detection system by mounting visibility sensor arrays combined with adaptive learning modules to provide more accurate visibility detections. The vehicle-based detector, Wavetronix SmartSensor HD, was installed at the same place to collect traffic data. Reduced visibility due to fog were selected and analyzed by comparing them with clear cases to identify the differences based on several surrogate measures of safety under different visibility classes. Moreover, vehicles were divided into different types and the vehicles in different lanes were compared in order to identify whether the impact of reduced visibility due to fog on traffic crash risk varies depending on vehicle types and lanes. Log-Inverse Gaussian regression modeling was then applied to explore the relationship between time to collision and visibility together with other traffic parameters. Based on the accurate visibility and traffic data collected by the new visibility and traffic detection system, it was concluded that reduced visibility would significantly increase the traffic crash risk especially rear-end crashes and the impact on crash risk was different for different vehicle types and for different lanes. The results would be helpful to understand the change in traffic crash risk and crash contributing factors under fog conditions. We suggest implementing the algorithms in real-time and augmenting it with ITS measures such as VSL and DMS to reduce crash risk.     

液氨储罐角焊缝在线相控阵检验技术

文中针对液氨储罐定期检验不开罐的特点,通过对相控阵超声成像检测技术的研究,设计了4块角焊缝试板,共8处裂纹缺陷,通过设定检测参数,确定了实验参数和检测方案,检测出了预制的8处裂纹,并与DR检测成像进了比对,得到了较好的检测效果,对于将超声相控阵检验技术用于实际检测具有借鉴意义。     

超声冲击处理对高强钢焊接接头残余应力影响的数值模拟

超声冲击处理(UIT)是一种有效的焊后改善焊接接头疲劳性能的工艺措施,其借助机械撞击和超声振动的共同作用,使焊趾表面产生塑性变形从而引入有益的压缩残余应力。为评价UIT技术对焊接接头残余应力的影响,该文提出了一套新的数值分析方法,包括焊接数值模拟及随后的超声冲击处理过程的动态弹塑性有限元分析。在有限元模型中考虑了实际的工艺参数和超声促成的材料软化效应。以船用高强钢AH36非承载十字焊接接头为研究对象,将预测的超声冲击处理前后的残余应力分布与实验结果进行对比,两者有较好的吻合。在此基础上,探讨了静态预载荷对超声冲击处理态残余应力再分布的影响。     

超声清洗槽内声场分布的研究

从一维平面波理论入手分析了超声清洗槽内的声场分布特性,用水听器法和染色法测量了超声清洗槽内的声场分布.结果表明,清洗槽内液面水平方向上的声压分布比较均匀,垂直方向上的声压由槽底到液面呈起伏变化,显示了驻波特性,总体上有逐渐减小的趋势,这说明了声波在传播过程中有一定的衰减.实验测量的声压分布和理论分析的结果比较一致.