动态OD反推理论中的关键问题研究

针对ITS研究中动态OD矩阵难以获得的问题,回顾动态OD反推理论的发展历程,在此基础上明确了该领域研究中的四个关键问题:状态变量的选择、系统方程的确定、OD量与路段流量的关系和OD矩阵动态特性的体现,在对其进行分析的基础上提出每个关键问题的解决方法,为动态OD反推理论的进一步研究垫定基础。     

一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

分段线性变参数控制在数字式自动找平控制系统中的应用

为了验证分段线性变参数控制在自动找平控制系统中的应用前景,对自动找平控制系统的结构、控制方式进行了介绍;分析了分段线性控制方式的工作原理及特点,在实验室建立了沥青混凝土摊铺机数字式自动找平控制系统试验台,设计了3套试验方案,即普通电磁阀方案、高速开关阀方案和分段线性控制方案;对这3种控制方案进行了试验比较,得出了在阶跃干扰作用下,3种控制方案的响应速度及产生超调时的超调量。结果表明:分段线性控制方案具有较快的响应速度,但在系统产生超调时,其超调量相对较大。     

A multi-spring model for monopile analysis in soft clays

The offshore wind industry in China has seen a rapid development in recent years and is projected to account for half of global yearly installed capacity in the years to come. Monopiles are a popular foundation solution for supporting offshore wind turbines. However, due to challenging seabed soil conditions, which often feature thick normally consolidated soft clays and harsh environmental loading (i.e. frequent occurrence of typhoons), extremely long monopiles are often designed. The large monopiles are costly to fabricate and install and sometimes kills the viability of the concept in cases where the bedrock is relatively shallow and expensive piling in rock is otherwise required. However, the state-of-practice for designing these monopiles in clays is typically by using the API p-y springs, which are widely known to underestimate soil-pile interaction stiffness and capacity for large diameter monopiles. Improvement to the design method can therefore have significant economic implications to the industry. The paper presents an effort toward this direction. A multi-spring beam-column model suitable for monopile design in soil conditions in China is proposed. The model features three soil spring components, namely the lateral p-y spring, the pile tip base shear s-y spring and rotational m-θ springs along the pile shaft. The validity of the model is verified by a comprehensive suite finite element parametric analyses. Guidance for incorporating the cyclic loading effect into design is also provided. The model proposed in this paper has large potentials for application in design practice.     

变邻域搜索求解公共交通乘务调度问题

公共交通乘务调度问题是一个将车辆工作切分为一组合法班次的过程,它是NP难问题,许多求解方法的效率都与班次评价密不可分,本文通过裁剪TOPSIS方法(Technique for Order Preference by Similarity to an Ideal Solution)设计了TOPSIS班次评价方法.此外,通过裁剪变邻域搜索算法使之适合求解乘务调度问题,提出了基于变邻域搜索的乘务调度方法(Crew Scheduling Approach Based on Variable Neighbourhood Search,VNS),其中,并入了TOPSIS班次评价方法在调度过程中进行班次评价,设计了两种带概率的复合邻域结构以增加搜索的多样性,帮助跳出局部最优,在VNS中利用模拟退火算法进行局部搜索.利用中国公共交通中的11组实例进行了测试,测试结果表明,VNS优于两种新近提出的乘务调度方法,且其结果关于班次数接近于下界.     

兰州地铁地温分布特性及其演化规律

以兰州地铁所在地区为研究对象,实测地铁隧道开挖前的地温(简称为初始地温),根据实测数据,提出地铁初始地温预测模型公式。采用非稳态传热的数值模型,分析运营条件下地铁隧道围岩温度的演化规律。结果表明:兰州地铁初始地温随环境气温和埋深的变化而变化;年变温层位于自地表至埋深12m处;年恒温层位于埋深12m及其以下,温度为15℃左右;年变温层中,1年内初始地温变化规律与环境气温变化规律相似,近似呈正弦曲线状分布,但存在相位滞后的现象;1年中初始地温的振幅随埋深的增大呈指数下降趋势。在隧道内空气与围岩之间热交换中,兰州地铁隧道围岩的温度及其梯度、热透厚度(未达到极限时)均与隧道内环境温度、热交换时间成正相关关系,但与距隧道内壁的距离成负相关关系。     

Centrifuge modelling of pipe-soil interaction in clay with crust layer

Seabed in regions, such as the Gulf of Guinea and North West Shelf of Australia, may exhibit a crust layer where the undrained shear strength can be an order of magnitude higher than that of the immediately underlying sediment. This can complicate design of steel catenary risers, where fatigue depends on the cyclic vertical stiffness of the pipe-soil interaction. Potential punch-through of the riser into the underlying soft soil may invalidate design assumptions based on the pipe-soil stiffness within the crust layer. The long-term evolution of pipe-soil stiffness within the crust layer, which exhibits similar properties to an over-consolidated soil, is also poorly understood. This paper describes centrifuge model tests undertaken in a clay sample with a crust layer, simulating the punch-through process of a pipe under load control and investigating the pipe-soil stiffness during long-term cyclic loading tests under displacement control. Results confirm that the potential for punching-through the crust layer depends strongly on the relative ratio of pipe diameter to crust layer thickness. The long-term evolution of pipe-soil stiffness showed a steady increase after an initial remoulding stage in contractile soils (normally consolidated and lightly over-consolidated), but a steady reduction in the heavily over-consolidated, more dilatant, crust. The magnitude of pipe-soil stiffness changes (during both remoulding and reconsolidation) is governed by the over-consolidation ratio of the soil and the amplitude of the cyclic displacements. This study provides insights on the relevant cyclic stiffness to consider when assessing SCR fatigue life in over-consolidated soils and soils exhibiting a superficial crust layer.     

A study on the stability of a motorcycle wheel–swingarm suspension with chain transmission

The present study describes a possible driving mechanism for a self-excited oscillation observed in motorcycle dynamics, often referred to as chatter. This phenomenon, affecting the performance of road racing motorcycles, has been simulated in straight running braking manoeuvres with multibody motorcycle models. It involves rear suspension bounce and driveline oscillation in the frequency range between 17 and 22?Hz. A simplified model of a motorcycle rear suspension with chain transmission is proposed and its stability in equilibrium configurations is studied via eigenvalue analysis. The sensitivity with respect to all its governing parameters is analysed by means of stability maps and the self-excitation mechanism is explained with the aid of energy balance analysis and phase diagrams. It is found that the key role for the instability onset is played by the gradient of the nonlinear characteristic slip function of the tyre.     

A signal-based fault detection and classification method for heavy haul wagons

This paper proposes a signal-based fault detection and isolation (FDI) system for heavy haul wagons considering the special requirements of low cost and robustness. The sensor network of the proposed system consists of just two accelerometers mounted on the front left and rear right of the carbody. Seven fault indicators (FIs) are proposed based on the cross-correlation analyses of the sensor-collected acceleration signals. Bolster spring fault conditions are focused on in this paper, including two different levels (small faults and moderate faults) and two locations (faults in the left and right bolster springs of the first bogie). A fully detailed dynamic model of a typical 40t axle load heavy haul wagon is developed to evaluate the deterioration of dynamic behaviour under proposed fault conditions and demonstrate the detectability of the proposed FDI method. Even though the fault conditions considered in this paper did not deteriorate the wagon dynamic behaviour dramatically, the proposed FIs show great sensitivity to the bolster spring faults. The most effective and efficient FIs are chosen for fault detection and classification. Analysis results indicate that it is possible to detect changes in bolster stiffness of ±25% and identify the fault location.     

VVL耦合喷油策略对GDI汽油机混合气形成的影响

利用三维仿真软件Ansys Fluent建立了GDI汽油机的仿真计算模型,就变气门升程耦合不同喷油策略对缸内气流运动和混合气形成的影响进行了模拟计算。结果表明,与大气门升程工况相比,小气门升程工况的缸内湍流运动强度、燃油蒸发和湿壁情况以及点火时刻混合气质量都明显改善;在小气门升程工况,采用两段喷油会缩短油气混合时间,过度推迟二次喷油时刻会恶化混合气质量和燃油湿壁情况;在大气门升程工况,两段喷油会改善混合气均匀性,随着二次喷油时刻推迟,燃油蒸发量增加,湿壁情况加剧,混合气质量得到改善;小气门升程工况下采用二次喷油时刻为470°曲轴转角,前后两次喷油量比例为7∶3的两段喷油方案在燃油蒸发和湿壁以及点火时刻缸内混合气质量这几个方面的效果都很好,是最合理的方案。