军用轻型全地形车的发展现状及趋势分析

介绍了国外军用轻型全地形车的发展现状，分析了轻型全地形车的性能特点和关键技术，对其发展趋势作出了预测。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

工程机械管理及维护系统的设计与开发

从预防性维护的角度出发,提出了工程机械管理及维护系统的设计与开发思路.介绍了系统的设计原理,主要功能模块,工作流程和技术特点.系统集机械台帐管理、状态检测、维护保养、故障诊断、维修等模块于一体,适用于多数公路企业的机械管理工作,对提高公路企业的管理水平和工作效率具有重要的意义.     

路面铣刨机械的养护

通过对路面铣刨机铣削装置的工作方式、工作原理的理论分析,针对路面铣刨机在正常作业过程中零件磨损的现象,探讨了一些养护方法,提出了路面铣刨机械的一些养护措施,对铣刨机的合理使用与维护具有重要意义.     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

轨道交通车辆的工艺流程标准化

从生产线建立、工艺流程编制、工艺布局设计和生产能力等方面进行分析,提出了轨道交通车辆工艺流程标准化设计方法和优化方法。基于精益管理理念和工序能力测算法,可以合理编制标准化工艺流程,从而降低劳动强度,提高生产效率。     

Eco-driving behaviors of electric vehicle users: A survey study

Previous research has shown that electric vehicle (EV) users could behave differently compared to internal combustion engine vehicle (ICEV) drivers due to their consciousness or practices of eco-driving, but very limited research has fully investigated this assumption. This research explores this topic through investigating EV drivers’ eco-driving behaviors and motivations. We first conducted a questionnaire survey on EV drivers’ driving behavior and some hypothetical decisions of their driving. It indicates various characteristics between EV and ICEV commuters, including self-reported daily driving habits, preferences of route choices, tradeoff between travel time and energy saving, and adoption of in-vehicle display (IVD) technologies. Then, through statistical analysis with Fisher’s exact test and Mann-Whitney U test, this research reveals that, compared to ICEV drivers, EV drivers possess significantly calmer driving maneuvers and more fuel-efficient driving habits such as trip chaining. The survey data also show that EV drivers are much more willing to save energy in compensation of travel time. Furthermore, the survey data indicate that EV drivers are more willing to adopt eco-friendly IVD technologies. All these findings are expected to improve the understanding of some unique behavior found in EV drivers.     

城市轨道交通车辆产品标准体系探索

分析了国内外城市轨道交通车辆产品标准体系的现状,重点介绍了城市轨道交通车辆产品标准体系的总体要求、结构搭建、产品标准的制修订,以及标准的实施和改进措施。     

酚醛树脂复合材料在轨道交通车辆上的应用

介绍了酚醛树脂复合材料试制的主要原材料、主要设备及仪器、试制流程及测试标准。详细阐述了酚醛树脂复合材料的氧指数、燃烧性能、机械性能、低密度等性能。分析了热压时间、热压温度及生产工艺对酚醛树脂复合材料性能的影响。试验证明,酚醛树脂产品的性能较为优良:热压时间控制在1.1~1.4 h时,复合材料的表面性能良好;热压温度为80~100℃时,可以得到表面质量细腻均匀的复合材料;适当调整生产工艺,可以提高酚醛树脂的产品质量、降低生产成本。     

STX4型驮背多功能运输车车体制造工艺

介绍了STX4型驮背多功能运输车的主要结构特点,分析了车体制造过程中的控制要点和难点,同时对制造难点提出了应对措施,有效保证了STX4型驮背多功能运输车的制造质量。