轨道复合不平顺对无缝线路横向变形的影响分析

轨道复合不平顺会对行车的安全及稳定性产生较大影响,也是影响无缝线路横向变形的一个重要因素。为研究轨道复合不平顺对无缝线路的具体影响,通过构建三维轨道框架非线性有限元模型,采用轨道框架单点(或多点)位置发生横向及竖向位移来模拟复合不平顺状态,通过计算获取节点位移变化规律,进而分析轨道复合不平顺对无缝线路横向变形的影响作用。研究结果表明,轨道的复合不平顺会对无缝线路的横向变形产生显著的影响;当线路出现三角坑等类似病害时,其节点位移变化更为显著,在无缝线路的日常养护维修中应尤为注意。     

移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

Policy packages for modal shift and CO2 reduction in Lille,France

This paper proposes different policy scenarios to cut CO₂ emissions caused by the urban mobility of passengers. More precisely, we compare the effects of the ‘direct tool’ of carbon tax, to a combination of ‘indirect tools’ – not originally aimed at reducing CO₂ (i.e. congestion charging, parking charges and a reduction in public transport travel time) in terms of CO₂ impacts through a change in the modal split. In our model, modal choices depend on individual characteristics, trip features (including the effects of policy tools), and land use at origin and destination zones. Personal “CO₂ emissions budgets” resulting from the trips observed in the metropolitan area of Lille (France) in 2006 are calculated and compared to the situation related to the different policy scenarios. We find that an increase of 50% in parking charges combined with a cordon toll of €1.20 and a 10% travel time decrease in public transport services (made after recycling toll-revenues) is the winning scenario. The combined effects of all the policy scenarios are superior to their separate effects.     

STX4型驮背多功能运输车车体制造工艺

介绍了STX4型驮背多功能运输车的主要结构特点,分析了车体制造过程中的控制要点和难点,同时对制造难点提出了应对措施,有效保证了STX4型驮背多功能运输车的制造质量。     

Analysis of volatility in driving regimes extracted from basic safety messages transmitted between connected vehicles

Driving volatility captures the extent of speed variations when a vehicle is being driven. Extreme longitudinal variations signify hard acceleration or braking. Warnings and alerts given to drivers can reduce such volatility potentially improving safety, energy use, and emissions. This study develops a fundamental understanding of instantaneous driving decisions, needed for hazard anticipation and notification systems, and distinguishes normal from anomalous driving. In this study, driving task is divided into distinct yet unobserved regimes. The research issue is to characterize and quantify these regimes in typical driving cycles and the associated volatility of each regime, explore when the regimes change and the key correlates associated with each regime. Using Basic Safety Message (BSM) data from the Safety Pilot Model Deployment in Ann Arbor, Michigan, two- and three-regime Dynamic Markov switching models are estimated for several trips undertaken on various roadway types. While thousands of instrumented vehicles with vehicle to vehicle (V2V) and vehicle to infrastructure (V2I) communication systems are being tested, nearly 1.4 million records of BSMs, from 184 trips undertaken by 71 instrumented vehicles are analyzed in this study. Then even more detailed analysis of 43 randomly chosen trips (N = 714,340 BSM records) that were undertaken on various roadway types is conducted. The results indicate that acceleration and deceleration are two distinct regimes, and as compared to acceleration, drivers decelerate at higher rates, and braking is significantly more volatile than acceleration. Different correlations of the two regimes with instantaneous driving contexts are explored. With a more generic three-regime model specification, the results reveal high-rate acceleration, high-rate deceleration, and cruise/constant as the three distinct regimes that characterize a typical driving cycle. Moreover, given in a high-rate regime, drivers’ on-average tend to decelerate at a higher rate than their rate of acceleration. Importantly, compared to cruise/constant regime, drivers’ instantaneous driving decisions are more volatile both in “high-rate” acceleration as well as “high-rate” deceleration regime. The study contributes to analyzing volatility in short-term driving decisions, and how changes in driving regimes can be mapped to a combination of local traffic states surrounding the vehicle.     

Fast-charging station choice behavior among battery electric vehicle users

This study explores how battery electric vehicle users choose where to fast-charge their vehicles from a set of charging stations, as well as the distance by which they are generally willing to detour for fast-charging. The focus is on fast-charging events during trips that include just one fast-charge between origin and destination in Kanagawa Prefecture, Japan. Mixed logit models with and without a threshold effect for detour distance are applied to panel data extracted from a two-year field trial on battery electric vehicle usage in Japan. Findings from the mixed logit model with threshold show that private users are generally willing to detour up to about 1750 m on working days and 750 m on non-working days, while the distance is 500 m for commercial users on both working and non-working days. Users in general prefer to charge at stations requiring a shorter detour and use chargers located at gas stations, and are significantly affected by the remaining charge. Commercial users prefer to charge at stations encountered earlier along their paths, while only private users traveling on working days show such preference and they turn to prefer the stations encountered later when choosing a station in peak hours. Only private users traveling on working days show a strong preference for free charging. Commercial users tend to pay for charging at a station within 500 m detour distance. The fast charging station choice behavior is heterogeneous among users. These findings provide a basis for early planning of a public fast charging infrastructure.     

Dynamic traffic metering in urban street networks: Formulation and solution algorithm

Traffic metering offers great potential to reduce congestion and enhance network performance in oversaturated urban street networks. This paper presents an optimization program for dynamic traffic metering in urban street networks based on the Cell Transmission Model (CTM). We have formulated the problem as a Mixed-Integer Linear Program (MILP) capable of metering traffic at network gates with given signal timing parameters at signalized intersections. Due to the complexities of the MILP model, we have developed a novel and efficient solution approach that solves the problem by converting the MILP to a linear program and several CTM simulation runs. The solution algorithm is applied to two case studies under different conditions. The proposed solution technique finds solutions that have a maximum gap of 1% of the true optimal solution and guarantee the maximum throughput by keeping some vehicles at network gates and only allowing enough vehicles to enter the network to prevent gridlocks. This is confirmed by comparing the case studies with and without traffic metering. The results in an adapted real-world case study network show that traffic metering can increase network throughput by 4.9–38.9% and enhance network performance.     

A flexible traffic stream model and its three representations of traffic flow

To connect microscopic driving behaviors with the macro-correspondence (i.e., the fundamental diagram), this study proposes a flexible traffic stream model, which is derived from a novel car-following model under steady-state conditions. Its four driving behavior-related parameters, i.e., reaction time, calmness parameter, speed- and spacing-related sensitivities, have an apparent effect in shaping the fundamental diagram. Its boundary conditions and homogenous case are also analyzed in detail and compared with other two models (i.e., Longitudinal Control Model and Intelligent Driver Model). Especially, these model formulations and properties under Lagrangian coordinates provide a new perspective to revisit the traffic flow and complement with those under Eulerian coordinate. One calibration methodology that incorporates the monkey algorithm with dynamic adaptation is employed to calibrate this model, based on real-field data from a wide range of locations. Results show that this model exhibits the well flexibility to fit these traffic data and performs better than other nine models. Finally, a concrete example of transportation application is designed, in which the impact of three critical parameters on vehicle trajectories and shock waves with three representations (i.e., respectively defined in x-t, n-t and x-n coordinates) is tested, and macro- and micro-solutions on shock waves well agree with each other. In summary, this traffic stream model with the advantages of flexibility and efficiency has the good potential in level of service analysis and transportation planning.     

Optimal design of electric vehicle public charging system in an urban network for Greenhouse Gas Emission and cost minimization

In this paper, we address the optimization problem of allocation of Electric Vehicle (EV) public fast charging stations over an urban grid network. The objective is to minimize Greenhouse Gas Emissions (GHG) under multiple constraints including a limited agency budget, accessibility of charging stations in every possible charging request and charging demands during peak hours. Additionally, we address bi-criteria problems to consider user costs as the second objective. A convex parsimonious model that depends on relatively few assumptions and input parameters is proposed and it is shown to be useful for obtaining conceptual insights for high-level planning. In a parametric study using a hypothetical urban network model generated based on realistic parameters, we show that GHG emissions decrease with agency budget, and that the reductions vary depending on multiple factors related to EV market and EV technologies. The optimal solutions found from the bi-criteria problems are shown to be close to the solution minimizing GHG emissions only, meaning that the emission minimizing policy can also minimize user costs.     

两种响应型船舶运动模型的对比及适用性分析

船舶运动模型作为自动舵性能检测平台的基础与核心，对于自动舵的研发、调试及船舶运动控制算法的设计都有非常重要的意义。现有的航迹航向自动舵检测平台普遍使用简化的一阶线性KT方程。由于忽略船舶回转运动中的纵向速度变化以及首摇角与横向速度之间的耦合，在实际使用中具有一定的局限性。本文引用国际电工委员会制定的航迹自动舵标准（ IEC62065）中提出的船舶运动模型，并对其进行仿真，将仿真结果与一阶线性KT方程的仿真结果进行对比分析，讨论一阶线性KT方程的适用范围。同时介绍改进的一阶非线性KT方程的形式并进行仿真试验，结果表明其与 IEC62065中非线性模型相似度较好，且减少了计算量。