铰接式转向架在城轨车辆中的应用研究

回顾铰接式列车的应用与发展,分析了铰接式列车的基本结构模式及优缺点;结合城市轨道交通的特点和城轨车辆的基本要求,论证了铰接式转向架在城轨车辆中运用的可行性,并提出了城轨车辆用铰接式转向架的初步设计方案。     

电信计费模型的设计

依据电信计费系统存在的问题,本文详细描述了电信计费模型的设计方法和各个模块的设计内容。     

汔车运行材料在现代电控汽油轿车上的使用分析

汽车使用的燃料、润滑剂、特种液和橡胶轮胎等统称为汽车运行材料。分析汽车运行材料在现代电控汽油轿车上的使用情况，给出相应的使用原则及注意事项，可为维修人员和驾驶员等提供参考。     

基于ANN星识别算法的仿真平台

星敏感器是一种高精确度的姿态测量仪器，它通过对观测到的星点进行识别来计算姿态。为了能够较好地测试和验证星识别系统的性能，设计了一个基于ANN算法的星识别仿真平台。通过对该星识别仿真平台性能的测试，表明该仿真平台能够方便，实时地测试星识别算法的性能与正确性，因此说它是一种具有较好实用价值的星识别仿真平台。     

用高温超导线圈和常导线圈构成的混合式电磁悬浮系统

常导电磁吸力悬浮系统悬浮气隙小、悬浮功率大,电动斥力悬浮系统不能实现静止悬浮、磁场污染大。由于受电流变化率限制,单独采用高温超导线圈构成的电磁吸力悬浮系统不能实现稳定悬浮。经分析比较,提出了一种用高温超导线圈和常导线圈构成的混合式电磁吸力型悬浮系统方案。采用这种混合式悬浮方案可增大悬浮气隙、实现稳态"零"功率悬浮、减轻车体重量、降低制冷费用、且无磁场污染。     

Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

京秦线提速路涵过渡段动力仿真与试验对比

结合京秦线提速改造工程进行了列车 路基动力仿真计算。在不同速度条件下,通过对路涵过渡段加固前后状态下机车车辆运行安全舒适性指标、轨道及路基主要动力性能指标的分析计算,对京秦既有线路涵过渡段提速到200km/h的适应性及加固方案的可行性提出了相应评价意见与建议,并与随后的实车试验进行了对比。试验测试结果验证了仿真分析的可靠性。     

车体材质对城轨车辆运行阻力的影响

介绍了铝合金、不锈钢和耐候钢等三种车体材质对车体质量及城轨车辆运行阻力的影响。     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

水深对船舶运动和波浪载荷的影响

本文利用简单Green函数法计算二维水动力，特切片法用于有限深水中船舶运动和波载的计算。对实船试算了迎浪航行时几种不同航速和水深的组合，计算结果（垂荡和纵摇响应、舯弯矩和钟前1／4船长处剪力）表明水深的显著影响。水深变浅，垂荡和纵摇响应峰值变小，弯矩和剪力变大，航速越大水深的影响越显著。