Greenhouse gas emissions from ships in ports – Case studies in four continents

Emissions of GHG from the transport sector and how to reduce them are major challenges for policy makers. The purpose of this paper is to analyse the level of greenhouse gas (GHG) emissions from ships while in port based on annual data from Port of Gothenburg, Port of Long Beach, Port of Osaka and Sydney Ports. Port call statistics including IMO number, ship name, berth number and time spent at berth for each ship call, were provided by each participating port. The IMO numbers were used to match each port call to ship specifications from the IHS database Sea-web. All data were analysed with a model developed by the IVL Swedish Environmental Research Institute for the purpose of quantifying GHG emissions (as CO₂-equivalent) from ships in the port area. Emissions from five operational modes are summed in order to account for ship operations in the different traffic areas. The model estimates total GHG emissions of 150,000, 240,000, 97,000, and 95,000 tonnes CO₂ equivalents per year for Gothenburg, Long Beach, Osaka, and Sydney, respectively. Four important emission-reduction measures are discussed: reduced speed in fairway channels, on-shore power supply, reduced turnaround time at berth and alternative fuels. It is argued that the potential to reduce emissions in a port area depends on how often a ship revisits a port: there it in general is easier to implement measures for high-frequent liners. Ships that call 10 times or less contribute significantly to emissions in all ports.     

第三轨供电系统中受流器与第三轨的接触压力及其对受流性能的影响分析

介绍了第三轨受流器的结构原理。分析比较了弹簧式和气压式受流器与第三轨接触压力调节方式的特点。基于电接触基本理论详细的阐述了受流滑板与第三轨接触区的导电机理。接触区域的导电电路由无数微小的电阻及电容并联而成,接触压力通过影响微小电阻、电容的数量比例,进而影响接触面上的导电能力和磨损性能。标称静态接触压力的设计值接近或等于"法向压应力临界值"时,导电能力和磨损特性取得均衡。     

“穷举法”在油船货油舱分舱优化设计中的应用

为实现油船货油舱分舱优化,以一艘大型油船为例,根据MARPOL公约和共同结构规范(HCSR)的要求,在主尺度、船型和货油舱总舱容确定的情况下,以最小静水弯矩为优化目标,基于"穷举法"编制优化货油舱横舱壁位置的应用程序。实际应用结果表明,该程序可运用到油船的分舱优化中,能达到快速、合理地分舱,提高设计效率的目的。     

船用厨房和具有烹调设备的配餐室的通风计算及空气处理方法

本文介绍了ISO 9943-2009国际标准和GBT 20846-2007中国国家标准中对船用厨房和具有烹调设备的配餐室的通风计算及空气处理中提出的送风量的计算方法，提出另一种更易于大家理解和接受的简易计算方法和空气处理过程，供工程技术及设计研究人员参考。     

型腔结构对尾轴承力学性能影响的有限元分析

型腔尺寸的大小和腔数对水润滑橡胶尾轴承的力学性能有重要影响，并且直接影响轴承的承载能力和运转精度。本文基于有限元法，研究了不同型腔数目、型腔全角和型腔长度对尾轴承的力学性能影响。结果表明：在5种不同腔数尾轴承的研究对比中发现，4腔尾轴承的力学性能最优。研究型腔全角和长度因素影响时，发现全角55°长度500 mm的型腔结构性能更好。     

地铁供电系统中压开关柜电流分析理论和方法

通过分析地铁供电系统不同电压等级的设备电流特征,确定35 kV电压等级设备电流可构造标准曲线,采用机器智能学习算法分析、测算地铁供电系统中各类开关峰谷时段运行电流,以均值-方差方法确定电流的高度异常偏离点,实现异常点数据周期内统计以及实时提醒功能。应用电流实测值分析电流在工作日、节假日的不同曲线,为负荷预测和非正常运行方式下的负荷叠加风险提供预测和评估依据,保障供电系统的安全运行,提高负荷管控效率。     

卡西姆港燃煤应急电站卸煤码头港池水域平面布置优化

针对复杂水域条件下大型散货码头的水域平面布置,基于卡西姆燃煤应急电站码头工程项目,根据对周边已建工程、红树林以及水动力等主要影响因素的深入分析提出初步平面方案,并通过船舶操纵模拟试验对平面布置及相关尺度进行优化,合理确定本工程平面布置方案。结果表明,本工程的建设对周边影响较小,水域尺度能够满足船舶通航及靠离泊要求,水域平面布置合理。     

汉巴南铁路兰渝联络线电分相设置方案研究

联络线电分相设置方案影响因素众多,且其设置与否对工程和运营的影响也较大。本文对汉巴南铁路兰渝联络线电分相设置方案进行研究,提出高速铁路设置关节式电分相联络线最短长度;对联络线电分相不同设置方案进行比选研究,并结合各方案的土建工程、信号系统、供电系统及限制因素提出布局优化措施,以期为联络线电分相合理设置与优化布局提供新思路。     

Evaluating sustainability of supply chains by two-stage range directional measure in the presence of negative data

Assessing sustainability of supply chains is a critical and increasingly complex problem. In recent years sustainability has received more attention in supply chain management (SCM) literature with triple bottom lines including social, environmental, and economic factors. Conventional data envelopment analysis (DEA) models consider decision making units (DMUs) as black boxes that consume a set of inputs to produce a set of outputs and do not take into consideration internal interactions of DMUs. Two-stage DEA models deal with such DMUs. However, existing two-stage DEA models are applicable only in technologies characterized by positive inputs/outputs. This paper aims to build and present a new two-stage DEA model considering negative input-intermediate-output data. Some numerical examples along with some theorems and properties are given to show capability of proposed method. The proposed ideas are used in a case study where 29 Iranian supply chains producing equipment of expendable medical devices are evaluated in terms of sustainability.     

A carbon footprint-based closed-loop supply chain model under uncertainty with risk analysis: A case study

The management of products’ end-of-life and the recovery of used products has gained significant importance in recent years. In this paper, we address the carbon footprint-based problem that arises in a closed-loop supply chain where returned products are collected from customers. These returned products can either be disposed of or be remanufactured to be resold as new ones. Given this environment, an optimization model for a closed-loop supply chain (CLSC) in which carbon emission is expressed in terms of environmental constraints, i.e., carbon emission constraints, is developed. These constraints aim to limit the carbon emission per unit of product supplied with different transportation modes. Here, we design a closed-loop network where capacity limits, single-item management and uncertainty on product demands and returns are considered. First, fuzzy mathematical programming is introduced for uncertain modeling. Then, the statistical approach to the possibility to synthesize fuzzy information is utilized. Therefore, using a defined possibilistic mean and variance, we transform the proposed fuzzy mathematical model into a crisp form to facilitate efficient computation and analysis. Finally, the risk caused by violating the estimated resource constraints is analyzed so that decision makers (DMs) can trade off between the expected cost savings and the expected risk. We utilize data from a company located in Iran.