Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis on the Effects of Overloading on the Mechanical Properties of Tunnel Structures in the Silty Ground --A Case Study of Sutong River-crossing GIL Utility Tunnel北大核心CSCD

Based on the Sutong GIL utility tunnel project, which is constructed by the shield machine under the river, and as for the overloading problem at the river bank slope during operating period, the refined threedimensional finite element model was established to study the deformation and cracking characteristics of the tunnel segment structure under different forms of overloading. The evolution laws of section convergence, joint opening and structural stress were analyzed, and the structure damage mechanisms were revealed under conditions of large area loading and local loading. The surface-surcharge control standard was proposed. For the big diameter shield tunneling crossing the silty clay, the research results show that: (1) the deformation failure process is divided into three stages under large area loading condition, taking the design load and compressive yield of rebars inside haunch as the critical points respectively. The first stage is characterized by the elastic stress, the second stage is in plastic state with fracture, and the third stage is accelerating deformation and instability stage. The vertical convergence is 110.5 mm with no opening of joints when rebars are yielded; (2)the deformation failure process under local loading condition is also divided into elasticity, plasticity and instability stages, taking the design load and tensile yield of rebars outside haunch as the critical points respectively. The vertical convergence is 152.6 mm with joint opening of 4.36 mm; (3) the early-warning values of additional stress on the ground under conditions of large area loading and local loading are 110 kPa and 70 kPa respectively. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

组合型水泥粉煤灰碎石桩(CFG桩)复合地基在深厚软基处理中的应用

在深厚软土地基(fak≤100 kPa)上建造储罐等建筑物,承载力要求高、不均匀沉降变形要求严,若采用单一CFG桩复合地基加固,可能导致桩距过小或桩长太长,需要采用组合型复合地基,CFG桩+振冲碎石桩复合地基是组合型复合地基的一种。根据CFG桩+碎石桩组合型复合地基的加固机理,分析了其受力特性以及CFG桩和碎石桩的作用,研究表明CFG桩对提高地基承载力和减小沉降起控制作用。基于优化理论,建立了组合复合地基的优化设计方法。通过工程实例讨论了组合复合地基的优化设计方法,结果表明:复合地基的承载力、沉降量和经济效益均满足工程要求。     

Airline energy efficiency measures using the Virtual Frontier Network RAM with weak disposability

In this paper, airline energy efficiency is divided into three stages: the operations stage, the services stage and the sales stage. Greenhouse gas emissions are treated as an undesirable output of the services stage. This new three-stage strategic operating framework is a modification of existing models. A new model, Virtual Frontier Network Range Adjusted Measure with weak disposability, is proposed to evaluate the efficiencies of 22 international airlines, from 2008 to 2012. The results show that the new model can establish more reasonable rankings and confirm new benchmarking airlines and that inclusion in the European Union’s Emissions Trading Scheme has had little influence on the improvement of airline energy efficiency.     

三维地面模型测量技术在水运工程中的应用

码头、航道等水运工程的三维设计、BIM设计需要更精细的、直观的、全覆盖的三维地面模型。利用多波束测深技术、无人机航测技术和三维激光扫描技术采集高精度的测量点云数据,基于AutoCAD、Civil 3D等软件平台,建立高精度、直观的三维地面模型的技术方案,结合工程实例进行论证分析。结果表明,从陆域到水域再到局部重点建构筑物三维测量内外业技术解决方案合理、效果显著,能较好地满足三维设计、BIM设计等要求,具有较高的应用和参考价值。     

振冲法加固砂土地基工艺选择及施工参数控制

根据砂土的黏粒含量,振冲法可采用不加填料的振冲密实法或有填料的振冲置换法,选择合适的振冲施工工艺和确定合理的工艺参数,与地基加固效果和地基处理的工程投资密切相关。在振冲器的振动荷载作用下,由于饱和砂土的液化产生振密作用,根据孔隙水压力的增长模型,推导了饱和砂土的临界液化时间,并分析留振时间的影响因素。结合两个工程实例,探讨了振冲密实法和振冲置换法两种工艺的适应性及加固效果。根据砂土的类型和黏粒含量,将砂土地基分为3类,不同的砂土地基采用合适的振冲工艺,并得出施工参数的合理区间。     

高桩码头水上施工平台的设计计算

通过不同施工阶段、不同荷载形式,对高桩码头水上施工平台的主梁、次梁及牛腿等进行了受力计算,其强度、刚度及安全性能均满足规范及使用要求,保证了平台的安全性与稳定性。钢平台的搭设,确保了钻孔嵌岩灌注桩及其上部结构的顺利施工。     

浅水波作用下护底块石对斜坡式护岸稳定性影响

在水深较小,原泥面为斜坡岩基的场区建造护岸时,应重视护底块石的设计。波浪在护底块石的上方发生破碎,卷破波对护底块体产生沿海侧方向的拖拽作用,从而导致护底块石失稳并引起护面块体的滑动。结合某护岸加固工程的方案设计和物理模型试验成果,提出在护底设计中,应结合增加护底块石质量与增大原泥面糙率两种措施制定护底块石方案;有条件时可通过增加护底长度或埋深的方式设置护底。     

基于扩展卡尔曼滤波的GPS信号跟踪技术

提出一种基于扩展卡尔曼滤波的GPS信号跟踪方法,通过扩展卡尔曼滤波器,得到基于相干积分支路的滤波模型,有效地削弱常规GPS跟踪环路中的跟踪误差,增强接收机的抗干扰性能,提升其在信号较弱位置下环路的跟踪性能,对加入惯性信息条件下惯性信息对系统所产生的影响做了相应的分析研究。通过仿真对比结果可以知道:当处于弱信号条件时,与通常用到的GPS信号跟踪方式相比,基于扩展卡尔曼滤波的信号跟踪算法可以有效提升跟踪的精度。     

基于超长嵌岩桩自平衡试验的风化岩层侧阻力值研究

通过东非某工程海上超长嵌岩灌注桩自平衡试验,探讨不同风化岩层的竖向抗拔侧阻力分布规律,得出如下结论:1)强风化砂岩侧阻力与位移拟合线性关系为:y=1.534 2x+180.48;2)中风化泥岩侧阻力与位移拟合线性关系为:y=0.954 5x+353.5;3)相对于中风化岩层,桩土相对位移对于强风化岩层阻力值更为敏感。