基于CIMS背景的CAPP系统体系结构的研究

本文在总结ＣＡＰＰ各单元技术发展状况和其他有关的计算机技术发展状况的基础上，结合ＣＡＰＰ系统各周边环境目前的发展状况，在对ＣＩＭＳ背景下如何考虑ＣＡＰＰ系统的体系结构问题进行了详细的论述，对若干难于处理的技术关键提出了的对策。     

Driver requirements and road traffic informatics

Initially the driver's role as a link in the driver-vehicle-road-traffic control-chain is discussed in a historical perspective. The gradual changes and the advantages and problems arising from these changes are discussed from behavioural point of view.Then the driver tasks are analyzed. A separation is made between trip planning, navigation, road following, traffic interaction, rule compliance, other than traffic tasks, car handling and speed choice. The relations between and the weights of these subtasks are discussed. Some existing driver behaviour models are reviewed in relation to the above mentioned tasks.Finally an effort is made based on the analyses of driver tasks and driver models to specify some general and some more specific potential advantages and problems with expected future RTI-systems.     

并列弹性双圆柱体流体脉动力的实验研究

本文通过试验研究了并列弹性双圆柱体在均匀流场中的脉动压力及其动态响应，给出了双柱间距直径比T／D＝1．75，2．5，3．5和4．19×104＜Re＜9．1×104范围中柱表面脉动压力沿圆柱周向的分布以及脉动升力和阻力系数．试验结果表明，柱的振动对其脉动升力和阻力系数有明显的影响．     

轮胎式龙门起重机防摇技术

八绳防摇系统是对常规的轮胎式龙门起重机防摇装置起升绳悬吊系统进行的改进,对提高轮胎式龙门起重机效率和减轻司机的劳动强度有明显的作用。     

聚合物改性水泥混凝土路面的施工工艺

结合实际施工经验，对聚合物改性水泥混凝土路面的施工准备，混合料拌和、运输、摊铺及养生等环节进行了论述，提出了在施工中应注意的事项和完整的施工工艺方案。实践证明，聚合物改性水泥混凝土路面性能良好．成本较低，符合环境友好、资源节约型路面的理念，具有良好的社会效益和经济效益。     

Finite-difference simulation of green water impact on fixed and moving bodies

A numerical method was developed to predict the water impact pressure caused by green water phenomena. The density function method was employed in the framework of a locally refined overlapping grid system. The simple problem of a rectangular body placed in regular waves was considered and the simulation results were compared with tank experiments. Good agreement with experiment was shown for wave–body interactions and for the pressure values at three different positions on the body. The case of a rectangular body with a vertical wall on the deck was also considered and the comparison showed satisfactory agreement. It was demonstrated that this method could be extended to a moving body problem, in which the body was free to undergo heave, pitch, and surge motions.     

溶洞地质条件下钻孔灌注桩的施工方法

着重介绍了在溶洞地质条件下钻孔灌注桩的施工方法.     

一种新型的主机调速系统

针对全回转舵桨汽车渡船，提出了一种新型的主机气控调速系统，并对其工作原理、调速方法及调压阀设计作了简要分析。     

港口装卸皮带传送装置大型链轮的维修技术

在散粮皮带传送装置中,JC3驱动链轮的正常运行非常重要。由于其体积和重量较大,这给维修带来了不小的难度。本篇文章主要是介绍该大型链轮在链轮互换思想指导下所进行的维修技术和方法。     

CAD／CAM技术在船舶减摇鳍设计制造中应用的思考

介绍了CAD／CAM技术以及如何应用CAD／CAM技术为减摇鳍的设计开发提供更有效的设计平台。