重载铁路轮轨磨损原因探讨

根据轮轨接触理论，分析了不同轮轨接触几何匹配关系下的轮轨接触应力情况，指出轮轨接触应力、轮轨接触几何关系、轴重是影响重载铁路轮轨磨损的主要因素，从重载运输装备方面提出了减少轮轨磨损的几点建议。     

δ—Al2O3f／Al合金基复合材料的强度研究

对挤压铸造法制得的δ－Ａｌ２Ｏ３ｆ／Ａｌ合金基复合材料，测量其短纤维地位向分布，导出了一个位向分布密度函数。在此基础上考虑在体抗拉强度高低和不同界面结合的影响，对复合材料的拉伸强度进行了预测，预测结果和实测值符合较好     

Dynamics of railway wagons subjected to braking torques on defective tracks

It is well known that track defects cause profound effects to the dynamics of railway wagons; normally such problems are examined for cases of wagons running at a constant speed. Brake/traction torques affect the speed profile due to the wheel–rail contact characteristics but most of the wagon–track interaction models do not explicitly consider them in simulation. The authors have recently published a model for the dynamics of wagons subject to braking/traction torques on a perfect track by explicitly considering the pitch degree of freedom for wheelsets. The model is extended for cases of lateral and vertical track geometry defects and worn railhead and wheel profiles. This paper presents the results of the analyses carried out using the model extended to the dynamics of wagons containing less ideal wheel profiles running on tracks with geometry defects and worn rails.     

A novel fuzzy logic correctional algorithm for traction control systems on uneven low-friction road conditions

The traction control system (TCS) might prevent excessive skid of the driving wheels so as to enhance the driving performance and direction stability of the vehicle. But if driven on an uneven low-friction road, the vehicle body often vibrates severely due to the drastic fluctuations of driving wheels, and then the vehicle comfort might be reduced greatly. The vibrations could be hardly removed with traditional drive-slip control logic of the TCS. In this paper, a novel fuzzy logic controller has been brought forward, in which the vibration signals of the driving wheels are adopted as new controlled variables, and then the engine torque and the active brake pressure might be coordinately re-adjusted besides the basic logic of a traditional TCS. In the proposed controller, an adjustable engine torque and pressure compensation loop are adopted to constrain the drastic vehicle vibration. Thus, the wheel driving slips and the vibration degrees might be adjusted synchronously and effectively. The simulation results and the real vehicle tests validated that the proposed algorithm is effective and adaptable for a complicated uneven low-friction road.     

Theoretical and experimental excitation force spectra for railway-induced ground vibration: vehicle–track–soil interaction,irregularities and soil measurements

Excitation force spectra are necessary for a realistic prediction of railway-induced ground vibration. The excitation forces cause the ground vibration and they are themselves a result of irregularities passed by the train. The methods of the related analyses – the wavenumber integration for the wave propagation in homogeneous or layered soils, the combined finite-element boundary-element method for the vehicle–track–soil interaction – have already been presented and are the base for the advanced topic of this contribution. This contribution determines excitation force spectra of railway traffic by two completely different methods. The forward analysis starts with vehicle, track and soil irregularities, which are taken from literature and axle-box measurements, calculates the vehicle–track interaction and gets theoretical force spectra as the result. The second method is a backward analysis from the measured ground vibration of railway traffic. A calculated or measured transfer function of the soil is used to determine the excitation force spectrum of the train. A number of measurements of different soils and different trains with different speeds are analysed in that way. Forward and backward analysis yield the same approximate force spectra with values around 1 kN for each axle and third of octave.     

Study on the derailment behaviour of a railway wheelset with solid axles in a railway turnout

ABSTRACT

Dynamic wheel–rail interaction in railway turnouts is more complicated than on ordinary track. In order to evaluate the derailment behaviour of railway wheelsets in railway turnouts, this paper presents a study of dynamic wheel–rail interaction during a wheel flange climbs on the turnout rails, by applying the elasticity positioning wheelset model. A numerical model is established based on a coupled finite element method and multi-body dynamics, and applied to study the derailment behaviour of a railway wheelset in both the facing and trailing directions in a railway turnout, as well as dynamic wheel–turnout rail interaction during the wheel flange climbing on the turnout rails. The influence of the wheel–rail attack angle and the friction coefficient on the dynamic derailment behaviour is investigated through the proposed model. The results show that the derailment safety for a wheelset passing the railway turnout in facing direction is significantly lower than that for the trailing direction and the ordinary track. The possibility of derailment for the wheelset passing the railway turnout in facing and trailing directions at positive wheel–rail attack angles will increase with an increase in the attack angles, and the possibility of derailment can be reduced by decreasing the friction coefficient.     

沈阳动车所进口在线式动车组轮对诊断系统应用

对引进进口动车组轮对诊断系统设备的构成、原理进行分析及对设备安装的建议,便于设备使用、维修人员对系统有深入的了解,确保设备真正发挥预测轮对何时需要再仿形加工或更换进行全自动测量、诊断的作用,并使之经常处于良好的使用状态。     

铁路矩形墩桥梁横向振动试验研究

通过对京通线银镇沟桥的现场振动测试 ,得到该桥的横向振动特性 ,给出桥上列车轮轨作用力的典型时程曲线和列车的脱轨系数及轮重减载率 ,为进一步研究矩形桥墩的横向振动提供实测数据。     

数字摄影测量系统在道路选线中的应用研究

在铁路公路选线时,一般先用数字摄影测量系统对已知相机文件影像进行摄影测量处理,得到数字地面模型(DTM)和数字线画图(DLG),再进一步完成选线设计过程。时有单位因存在缺少相机文件情况,终止相关研究工作而造成经济损失。以温福铁路影像为原始资料的研究,在未知相机文件影像的情况下,提取了较高质量的选线资料。     

车辆前轮摆振的原因分析与解决方法

简要介绍前轮摆振的现象;分析原因,并找出解决方法。