海军舰船密封现状与泄漏治理

通过对我国海军舰船密封现状的研究,根据密封材料和密封技术的新发展提出了治理舰船泄漏的方法,对于应用密封技术解决海军舰船的“三漏”问题有一定的实用价值。     

Experimental study on the interlayer friction and wear mechanism between armor wires of umbilicals

Friction and wear behavior between armor wire layers of umbilical plays an important role in its mechanical properties, in particular its fatigue life. The present paper addresses friction tests to investigate the interlayer sliding friction and wear mechanism of armor wires in an umbilical. A series of friction tests were carried out to study the evolution of coefficient of friction (COF) and wear between armor wire layers. The results show that the COF increases with increasing number of reciprocating sliding cycles in dry friction condition. A dual stable trend was found in the evolution process of interlayer friction and wear of armor wires. A friction model was proposed to describe this trend by dividing the evolution process into three stages: the initial stable stage, the transition stage, and the latter stable stage. The mechanism of the dual stable trend was revealed, which was mainly caused by wear process of nylon fiber tape, and effected by dry/wet wear condition and wear coefficient. The effect of the contact condition, sliding amplitude and number of nylon fiber tape on COF was studied. The COF of the latter stable stage increases with increasing sliding amplitude and number of layers of nylon fiber tape. The finding in this paper provides a valuable approach for a more accurate fatigue life prediction of an umbilical.     

钢丝绳铝合金压制接头实用技术分析

介绍了钢丝绳铝合金压制接头的使用范围、特点和材料,分析了钢丝绳铝合金压制接头破裂及脱扣现象,对比分析了钢丝绳铝合金压制接头连接钢丝绳与其他方法连接钢丝绳的优势。     

用"MTC"钢丝绳检测技术诊断港口集装箱起重机上的钢丝绳

应用"MTC"钢丝绳检测技术,采集和处理港口集装箱起重机钢丝绳的状态信息,通过定量、定位检测,发现断丝、锈蚀、磨损及其引起的钢丝截面积总和变化等缺陷,掌握钢丝绳的实际技术状态,指导其使用管理.     

延长港口集装箱起重机钢丝绳使用寿命的方法

从结构选型、轮槽检查、规范使用、维护润滑、及时处理初期断丝等使用角度,探讨如何提高港口集装箱起重机钢丝绳使用寿命。     

大型客车搭铁电路设计

主要介绍客车整车线路中负极搭铁回路涉及的电位差问题、短路电流问题,并对实际应用中的搭铁设计进行总结并提出建议。     

铜包钢线的包覆焊接工艺与性能

研究了铜包钢线的包覆焊接工艺及所得复合导的线性能，使用10例钢钢丝和无氧铜带为原材料，经过表面处理后包覆焊接成为复合线坯，再通过拉拔和处理获得复合导线，检测结果表明，用这种工艺制作的铜包钢线，铜层沿圆周及纵向分布均匀，铜与钢的界面实现了良好的冶金结合，其力学性能和电阻率指标均满足CATV同轴电缆内导体的要求。     

汽车线束及线束零件介绍（Ⅰ）

介绍汽车线束种类；详细阐述电线及线束所用零件的结构、材料、性能及应用；最后总结线束设计开发时应考虑哪些方面。     

基于转移阻抗法的带保护线的AT供电测距原理

带保护线的AT供电方式较其他供电方式在结构上更为复杂,故障率也比其他供电方式更高.因此能够快速确定故障地点并及时处理故障显得尤为重要.本文首次提出了应用转移阻抗法对带保护线的AT供电方式故障测距,通过保护线和钢轨的等值计算,找到带保护线的AT供电方式故障测距公式中的阻抗计算方法,解决了目前没有带保护线等值电路情况下的阻抗计算问题,最后运用Matlab/Simulink仿真验证了本文提出的转移阻抗法的阻抗计算可以应用于带保护线的AT供电方式故障测距.     

接触网承力索相磨问题探讨

介绍防止接触网承力索相磨常用的几种方法,通过施工、大修和运营检修中对承力索相磨几种方法应用,建议优化接触网结构及采用预绞式保护条的方法,解决承力索相磨的问题。