评价沥青胶结料疲劳性能的试验方法

主要介绍了国外研究较为成熟的两种评价沥青胶结料疲劳性能的试验方法,以及两种方法的试验原理和过程,并分析了G＊sinδ与DER指标在评价疲劳性能方面的有效性.     

对中国未来10年道路交通安全状况分析与初步预测

笔者从中国现代道路交通系统的发展现状与道路交通安全状况出发，以过去10多年中国汽车、摩托车保有量的发展轨迹为基础，对中国未来一定时期（2004～2015年）机动车保有量的发展变化及政府采取不同管理对策条件下的道路交通安全状况的发展水平进行了预测。结果表明：政府管理对策对道路交通安全状况变化具有决定性影响。     

交通环境对交通安全的影响及对策

交通安全涉及人、车、道路及环境等诸多因素,对交通事故的成因分析表明,驾驶员的责任是主要影响因素,其次是车辆和道路因素。但不容忽视的是,目前关于交通环境对事故影响的研究尚不够充分;交通管理部门确定事故原因也主要从人、车2 因素入手,较少涉及交通环境因素。事实上,作为事故的间接原因,交通环境常常通过间接作用影响安全,亦即不良的交通环境诱发人的不安全行为,从而导致人员违章等交通事故的发生。     

Managing transportation during highway reconstruction: A recommended process

Major highway reconstruction can cause significant disruptions to existing travel patterns and economic activity. Reducing these impacts on travelers, shippers, businesses and residents requires that innovative and effective transportation management actions be developed and implemented. This paper reports the major findings and recommendations of a research study on managing transportation during highway, reconstruction. The primary objectives of the study were

走行轮垂向刚度对跨座式单轨车辆曲线通过性能的影响

考虑到跨座式单轨车辆通过曲线时主要靠导向轮来导向,导向轮径向力大小是评价单轨车辆曲线通过性能的一个重要指标。运用多体动力学仿真分析软件ADAMS建立单轨车辆仿真模型。在轨道半径和超高都不变的情况下,车辆以恒定的速度运行,通过改变走行轮垂向刚度的大小来分析导向轮所受径向力情况以及对车辆曲线通过性能的影响。单轨车辆仿真分析研究表明,走行轮垂向刚度的大小对车辆的曲线通过性能有很大影响。     

铁路钢轨预防性打磨型面及其对车辆运行性能的影响

钢轨缺陷威胁列车的运行安全。在钢轨缺陷形成的初始阶段对钢轨进行预防性打磨能有效防治缺陷的发展,延长钢轨使用寿命,同时也能减少在轨道上运行的机车车辆发生危险事故的几率。采用经验设计法设计了一种适用于铁路钢轨预防性打磨的型面,并阐述了其构造过程。然后用SIMPACK软件及CONTACT数值程序对其进行了列车动力学性能及轮轨接触性能的分析。结果表明,设计的钢轨预防性打磨型面能保证车辆的运行性能,符合预期。在钢轨打磨型面设计上做了尝试,为我国铁路钢轨打磨型面优化设计提供了借鉴。     

出口澳大利亚30t轴重ZK1—K型转向架的研制

介绍了出口澳大利亚30t轴重ZK1—K型转向架的主要技术特征、技术参数和结构,并对其强度和动力学性能进行了计算与试验。结果表明,该转向架的各项指标均满足相关标准的要求。     

公路交通参数检测器的设计

提出了一种公路交通参数检测器的设计方案。检测器分为检测模块与处理模块两部分，利用LC并联谐振电路与锁相环工作原理，设计了基于单片计算机的检测模块；根据检测器的性能要求，设计了基于单片计算机的处理模块，完成对数据的采集、处理、存贮与传输。本检测器具有实用性好、抗噪声与防串音能力强、工作稳定度高和易于实现联网工作的优点。     

模糊逻辑推理在消除交通流诱导负效应中的应用

针对交通流诱导可能产生的负效应问题,提出了诱导负效应消除的原理和模糊逻辑推理方法。在原理设计中,考虑了出行者的出行行为对网络交通流分配的影响;在实现方法上,应用模糊推理技术对分流交通量进行了预测,并设计了路线交叉口信号灯配时方案调整的模糊控制算法,模拟结果验证了模糊逻辑推理技术的有效性。研究表明:交通流诱导负效应的产生主要是由于信息条件下的道路出行者路线选择行为的不确定性引起的,而且交通流诱导与控制同时进行是消除交通流诱导负效应产生的关键。     

Bus Priority Using pre-signals

The need to provide efficient public transport services in urban areas has led to the implementation of bus priority measures in many congested cities. Much interest has recently centred on priority at signal controlled junctions, including the concept of pre-signals, where traffic signals are installed at or near the end of a with-flow bus lane to provide buses with priority access to the downstream junction. Although a number of pre-signals have now been installed in the U.K., particularly in London, there has been very little published research into their design, operation and optimisation. This paper addresses these points through the development of analytical procedures which allow pre-implementation evaluation of specific categories of pre-signals. The paper initially sets out three categories of pre-signal, which have different operating characteristics, different requirements for signalling and different impacts on capacity and delay. Key issues concerning signalling arrangements for these categories are then discussed, together with a summary of the analytical approach adopted and the assumptions required. Equations are developed to allow appropriate signal timings to be calculated for pre-signalised intersections. Further equations are then developed to enable delays to priority and non-priority traffic, with and without pre-signals, to be estimated with delay being taken here as the key performance criterion. The paper concludes with three application examples illustrating how the equations are applied and the impacts of pre-signals in different situations.The analyses confirm the potential benefits of pre-signals, where these signals apply to non-priority traffic only. Where buses are also subject to a pre-signal, it is shown that disbenefits to buses can often occur, unless bus detectors are used to gain priority signalling.