键合图理论在汽车振动分析中的应用

本文应用键合图理论建立了汽车5自由度振动系统的键图模型并推导出状态方程。编制了动态仿真程序,计算了国产某轻型越野车和某轻型货车驶过三角形单个凸起时的振动响应,分析了悬架参数对振动的影响,指出了提高该车平顺性的途径。进行了轻型货车实车试验并将试验结果与计算结果做了对照,证明所选模型和所编程序是正确的和实用的。     

双向导螺杆的齿形及修缘

该文对绞车排绳装置中双向导螺杆的齿形及修缘问题进行分析研究,阐述双向导螺杆在设计中应遵循的一些基本原则及其注意事项。     

A two-step outlier removal procedure for surface reconstruction

Outliers in point clouds affect the performance of surface reconstruction directly. Most of outlier removal methods just remove those outliers far away from the real surface and are only applied to handle watertight surface. In this paper, a two-step outlier removal procedure is proposed to filter the point clouds acquired from the gray code and line-shifting technique. The first step is to remove the outliers far away from the real surface. Some feature points are extracted from the point clouds to construct an initial surface. The points with distances to the initial surface greater than a given threshold are removed as distant outliers. The retained points are linked into lines in each structured light sheet using their Voronoi diagrams. Some of lines which are very close to the real surface are removed as near outliers in the second step. The experimental results show that the proposed method is very effective in removing outliers for surface reconstruction. Foundation item: the National Natural Science Foundation of China (No. 30470488)     

基于键图理论对安装EPS系统的车辆操纵稳定性的仿真分析

应用键图理论建立电动助力转向系统(EPS)的模型,将电动助力转向系统的键图模型和matlab的simulink仿真方框图相连接,并利用simulink的可视化功能实现汽车操纵稳定性的可视化仿真,仿真结果表明,将simulink仿真工具箱与键图模型相结合,可使汽车性能分析研究更为直观和简洁.     

拼焊车门内板冲压成形性分析

首先介绍了采用不等厚拼焊板的车门内板在冲压成形过程中出现的问题;接着对缺陷区域进行主应变测量和安全成形裕度预测.结果表明,车门内板出现破裂和起皱的主要原因是拉延筋阻力不足和厚、薄两侧板料的流动阻力不均.最后提出采取局部调整拉延筋阻力和压边力等措施来改善车门内板冲压成形性.     

双向应力场中表面裂纹应力强度因子的权函数法

半椭圆表面裂纹是船舶等焊接结构中常见的损伤形式,计算裂纹尖端应力强度因子是结构损伤容限设计的前提,权函数法是求解复杂应力场中应力强度因子的有效手段之一。本文基于一种集中力载荷权函数统一形式,通过三维有限元建模计算了裂纹半长比a/c=0.05~1.0、裂纹深度比a/T=0.01~0.8的表面裂纹应力强度因子,并将其作为参考解,得到一组形状适用范围更广的有限厚度平板表面裂纹最深点和表面点的二维权函数。权函数的准确性通过在裂纹面上施加最高六阶的双向变化应力载荷进行验证,权函数法结果与有限元法相比求解误差在10%以内。文中所提出的权函数为复杂焊接结构表面裂纹扩展分析奠定了基础。