单周控制的单相静止无功发生器

提出了单周控制的单相静止无功发生器(SPSVG)的工作原理,利用单周控制形成的正弦脉宽调制SPWM,对其单相电压源逆变器进行控制,保证电流的正弦性,对SPSVG进行了建模以及开环、闭环控制的Matlab/Simulink的仿真,仿真结果证明在原理上可行。     

基于分布式发电的单相双凸极直流发电机原理和时步有限元分析

分布式发电(DG)是指在公共电力系统中的关键部位或在用电负载处使用小型发电机(组)供电的模式,合理发展分布式供电有利于节约能源和保护环境。文章提出单相双凸极直流发电机作为小型清洁能源分布式直流电源系统的主发电机,其结构简单、功率重量比高、转速高,可以起到简化系统、降低成本、提高可靠性的作用。首先介绍了该型电机的原理和构成方法,然后运用时步有限元法对发电机进行电磁计算,分析、比较了电励磁、永磁单相4极/6极(定子极数/转子极数)双凸极直流发电机和三相电励磁6极/4极双凸极直流发电机的外特性和功率曲线,以及电励磁单相4极/6极双凸极直流发电机的3种发电方式的外特性和功率曲线,最后分析并仿真验证了减小输出电压脉动的方法。     

200km/h六轴大功率客运交流传动电力机车概述

介绍了200 km/h六轴大功率客运交流传动电力机车的主要技术特点、性能参数、总体结构,以及通风系统、电气系统、机械系统、制动系统等子系统的技术方案。     

交直流转换场牵引供电系统技术研究

新建水曹铁路(AC25kV)与既有卑水线(DC1650V)在木厂口站接轨,本文以"如何实现2种制式供电系统的安全可靠转换"为目的,借鉴国外经验,结合工程实际,研究在木厂口车站设计"交直流转换场"牵引供电系统技术方案及操作程序。     

HXD3C型交流传动电力机车DC600V列车供电系统

HXD3C型交流传动电力机车是干线客货通用电力机车,机车额定功率为7 200 kW,最高速度为120 km/h.该机车列车供电系统具备DC 600 V供电能力.文章介绍了HXD3C型机车列车供电系统的结构、技术特点,并通过试验验证该列车供电系统性能.     

安全气囊气体发生器壳体精密成形方法的研究

论述了安全气囊气体发生器壳体的基本结构形式及其不同的成形方法。提出了流动控制成形力的计算公式、控制腔位置的判断准则及其形状和尺寸的设计方法。通过试验表明，所开发的流动控制成形技术可节约原材料、提高工作效率及产品质喇，具有显著的技术经济效益。     

30kW微燃机电、热联供机组开发应用技术与经济分析

简单介绍了微燃机电、热联供机组工作原理，详细对比分析了工程实例与普通柴油发电机组及锅炉采暖技术与经济性能参数，对以后野外施工及偏远无市电地区能源保障提出了看法。     

Time-domain coupled dynamic simulation for SFT-mooring-train interaction in waves and earthquakes

In this study, Submerged Floating Tunnel (SFT)-mooring-train coupled dynamics is solved in the time domain to investigate their dynamic and hydro-elastic interactions under wave and earthquake excitations. The SFT is modeled by the rod-FE (finite element) theory, and it is connected to mooring lines through dummy-connection-mass and linear and rotational springs. A 3D rigid-multi-body dynamic model is developed for train dynamics that consists of seven rigid bodies. The tunnel-train interaction is taken into consideration based on the wheel-rail correspondence assumption and the simplified Kalker linear creep theory. The developed computer simulation program is validated through comparisons with commercial programs and published results when possible. In the case of earthquake-induced dynamics of the coupled system, the effects of soil conditions, tunnel length, mooring interval, seismic-wave propagation, and seaquake are investigated. The magnitudes of the SFT downward motions induced by the moving train are small compared with the motions induced by earthquakes. The earthquake causes transient SFT responses especially at their lowest wet natural frequencies while high-frequency motions are induced by seaquake effect. Structural damping and seismic propagation play an important role in dynamic responses. The interaction of the tunnel and moving train is also evaluated for various train speeds in terms of the derailment and offload factors and riding-comfort criterion. For the given SFT and train designs, the offload factor and riding-comfort criterion can slightly exceed their limits at certain earthquake conditions with the speed as high as 70 m/s, which can be adjusted by reducing train speed.     

土压平衡盾构施工中泡沫改良砾砂土的试验研究

为了解决土压平衡盾构在砾砂土地层掘进过程中,土体塑流性差、刀盘及螺旋输送机磨损严重和开挖面平衡不易保持等问题,通过自制泡沫发生器发泡,对砾砂土地层的泡沫改良技术进行室内试验研究,分析气液比、含水率和泡沫掺量对塑流性的影响和改良前后土样的渗透系数的变化规律,得出泡沫发生器气液比在30∶1~55∶1、含水率为5%~12.5%、泡沫掺量为20%~40%时,土体具有较好的塑流性,泡沫的"轴承效应"和泡沫剂中表面活性剂的亲水基团与水、砾砂土颗粒形成的氢键是塑流性提高的根本原因;使用泡沫剂改良砾砂土后,渗透系数大幅降低,掺泡沫后在280 min内渗透系数随时间变化较小,能达到10~(-5)cm/s,泡沫剂溶液中高分子化合物的联结和液桥力是土样具有堵水作用的原因。     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.