某高速公路13m跨简支桥检测试验研究

采用原位等效静荷载试验方法,检测和验证13m跨简支钢筋混凝土单块板,铰缝处理前后结构的受力性能,铰缝处理前后单板挠度分别为1/307、1/786,单板经铰缝处理满足了正常使用要求。     

北京城市交通发展战略研究

本文综合分析了北京城市交通现状，运用生产力布局的理论对北京城市交通拥堵的原因进行分析，探索了国内外大城市交通发展的最新趋势，根据发展“首都经济”的要求．提出解决北京城市交通拥堵问题，必须采取标本兼治，并提出北京城市交通发展战略研究的有关建议。.     

西部公路发展策略研究

采用SWOT分析法作为西部公路发展策略的制定方法,在对西部公路交通系统的内外部环境影响因素归纳、剖析的基础上,给出了西部公路内外部环境分析与评价的方法,按重要性确定了西部公路发展环境的优势(S)与劣势(W)、机会(O)和威胁(T)因素,并采用定量与定性方法相结合提出了西部公路发展的建议策略,为西部公路发展在策略层面提供了理论指导。     

海湾大桥北引道沥青混凝土罩面设计

结合广东省汕汾高速公路汕头海湾大桥北引道路面加铺工程,分析软基路段过渡性路面的病害,提出沥青混凝土路面罩面结构设计和施工中须注意的问题.     

风积沙的毛细性及其盐胀的室内试验研究

通过毛细水上升高度试验，得出了风积沙在最佳含水量、不同压实度条件下的毛细水上升高度数据；通过室内盐胀试验得到了不同含盐量风积沙的盐胀量，并分析了含盐量及温度与盐胀量的关系。     

Evaluating determinants of attractiveness and their cause-effect relationships for container ports in Taiwan: users’ perspectives

The attractiveness of ports is usually a pre-requisite and necessary condition for ports to achieve competitiveness, as well as the springboard to explore the competitive advantages of ports. To determine whether a port is competitive, it is necessary to explore whether it boasts certain factors that make the port attractive to users. The main purpose of this article is to apply the Analytic Hierarchy Process (AHP) method and the Decision Making Trial and Evaluation Laboratory (DEMATEL) technique to evaluate key determinants of attractiveness and their cause/effect relationships for container ports in Taiwan. The empirical results showed that: (1) Top six determinates of attractiveness for container ports are ‘ample cargo sources,’ ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ ‘efficient wharf operations,’ and ‘adequate wharfs and back-line land,’ respectively. (2) Among the above six determinants of attractiveness, ‘ample cargo sources’ is the cause determinant. Three determinants of port attractiveness, ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ which are the effect determinants. They are affected by the determinants of attractiveness of ‘ample cargo sources’. In addition, this study discusses the above findings and expects to provide the study results to Taiwan’s port authorities for reference.     

Does crowding affect the path choice of metro passengers?

This paper investigates crowding effect on the path choice of metro passengers. We show people reroute not only to avoid the delay from crowding but also to evade crowding itself. More specifically, a logit model fits best when it uses the transit delay from crowding as well as the passenger load of a connection in addition to the conventional explanatory variables. Also, we demonstrate that crowding decreases the overall welfare of metro passengers. The model is tested on the real path choice data acquired by the recent algorithm by Hong et al. (2015) known to detect the real path choice from Smart Card data in more than 90% of the cases.     

Local joint flexibility of tubular X-joints stiffened with external ring or external plates

In the present paper, the Local Joint Flexibility (LJF) of the ring-stiffened X-joints and plate-stiffened X-joints under compressive load is investigated. In the first phase, a finite element (FE) model was generated and verified with the results of available experimental tests and equations. In the next phase, a set number of 234 FE models were created to evaluate the role of the external ring size (β_r and τ_r), the external plate size (β_p and τ_p), and the connection geometry (γ, τ, and β) on the LJF factor (f_LJF). In these FE models, the weld connecting the chord and brace members was generated. The results indicated that the f_LJF of a plate stiffened joint can be down to 76% of the f_LJF of the corresponding un-stiffened joint. Also, the effect of the ring size on the f_LJF was more than the effect of the plate size on the f_LJF, because of the stiffener position. Despite the notable effect of the ring and the plate on the f_LJF, there is not any study or formula on tubular connections stiffened with ring or plate. Therefore, the FE results were used to propose two parametric formulas for determining the f_LJF in X-joints with external ring or external plate under brace compressive load. Moreover, the derived formulas were checked based on the UK DoE acceptance criteria.     

Urban single-lane roundabouts: A new analytical approach using multi-criteria and simultaneous multi-objective optimization of geometry design,efficiency and safety

Building safe and effective roundabouts requires optimizing traffic (operational) efficiency (TE) and traffic safety (TS) while taking into account geometric factors, traffic characteristics and local constraints. Most existing simulation-based optimization models do not simultaneously optimize all these factors. To capture the relationship among geometry, efficiency and safety, we put forward a model formulation in this paper. We present a new multi-criteria and simultaneous multi-objective optimization (MOO) model approach to optimize geometry, TE and TS of urban unsignalized single-lane roundabouts. To the best of our knowledge, this is the first model that uses the multi-criteria decision-making method known as analytic hierarchy process to evaluate and rank traffic parameters and geometric elements of urban single-lane roundabouts. The model was built based on comprehensive review of the research literature and existing roundabout simulation software, a field survey of 61 civil and traffic expert engineers in Croatia, and field studies of roundabouts in the Croatian capital city of Zagreb. We started from the basis of Kimber’s capacity model, HCM2010 serviceability model, and Maycock and Hall's accident prediction model, which we extended by adding sensitivity analysis and powerful MOO procedures of the bounded objective function method and interactive optimization. Preliminary validation of the model was achieved by identifying the optimal and most robust of three geometric alternatives (V.1-V.3) for an unsignalized single-lane roundabout in Zagreb, Croatia. The geometric parameters in variant V.1 had significantly higher values than in the existing design V.0, while approaches 1 and 3 in variant V.2 were enlarged as much as possible within allowed spatial limits and Croatian guidelines, reflecting their higher traffic demand. Sensitivity analysis indicated that variant V.2 showed the overall highest TE and TS across the entire range of traffic flow demand and pedestrian crossing flow demand at approaches. At the same time, the number of predicted traffic accidents was similar for all three variants, although it was lowest overall for V.2. The similarity in predicted accident frequency for the three variants suggests that V.2 provides the greatest safety within the predefined constraints and parameter ranges explored in our study. These preliminary results suggest that the proposed model can optimize geometry, TE and TS of urban single-lane roundabouts.