Study on driver model for hybrid truck based on driving simulator experimental results

In this paper, a proposed car-following driver model taking into account some features of both the compensatory and anticipatory model representing the human pedal operation has been verified by driving simulator experiments with several real drivers. The comparison between computer simulations performed by determined model parameters with the experimental results confirm the correctness of this mathematical driver model and identified model parameters. Then the driver model is joined to a hybrid vehicle dynamics model and the moderate car following maneuver simulations with various driver parameters are conducted to investigate influences of driver parameters on vehicle dynamics response and fuel economy. Finally, major driver parameters involved in the longitudinal control of drivers are clarified.     

武广客运专线衡阳段路基A,B组填料试验研究

通过颗粒分析、击实试验、中德对比分析试验及土工大三轴剪切试验等,研究武广客运专线路基A,B组填料路基填筑质量控制指标及其强度特性,并考虑填料中细粒土含量的影响。研究结果表明:路基以压实系数作为密实度控制指标是最合理的;衡阳段路基密实度控制指标:基床底层压实系数应取0.95,路基本体压实系数应取0.93;路基施工中碾压荷载应控制在一定范围内,细粒土的含量为6%其路基填筑质量更好。研究成果在该段路基施工中应用,取得了比较理想的效果。     

尚志公铁立交桥橡胶支座合理布置与更换技术研究

橡胶支座是桥梁结构的重要组成部分。尽管橡胶支座的性能不断改进,布置不断完善,但不少桥梁建成后还是存在支座失效及梁体滑移问题,增加了桥梁的维修费用。对尚志公铁立交桥梁体滑移和橡胶支座合理布置的问题进行了探讨,提出了坡桥支座布置原则、钢扁担梁法支座更换新技术及动态控制等方法,以提高和改善橡胶支座的布置与更换技术。     

某型舰炮远程故障诊断专家系统的设计与实现

文章针对某型舰炮的工作原理以及故障特点,结合人工智能中专家系统的知识,采用的B／S模式下jsp＋servlet技术来设计出一套该型舰炮的远程故障专家系统。在某型舰炮维修的过程中,该文所设计的软件能方便快速的解决故障,在武器装备维护中具有重要的军事意义。     

交通运输事故隐患跟踪管理系统开发研究

事故隐患跟踪管理系统主要针对交通运输部门对隐患识别、隐患上报、隐患控制、隐患消除进行全过程的隐患跟踪管理,并以此为依据开发基于B/S实现的交通运输部门隐患跟踪管理系统,以实现交通运输部门不同层级的企事业单位对隐患管理的网络化办公,提高交通行业的安全隐患管理效率,做到防范于未然,把安全隐患消灭在萌芽状态。     

H型钢接触网支柱在风荷载作用下的疲劳性能分析

H型钢接触网支柱在高速铁路中得到广泛使用,直接影响铁路接触网系统安全。长期处于风荷载作用下,H型钢接触网支柱存在疲劳问题。通过建立数值计算模型,应用热点应力的表面外推法,对H型钢接触网支柱柱脚焊缝在风荷载作用下的疲劳性能进行分析。以兰新高铁H型钢接触网支柱为例,依据热点应力-寿命曲线,计算支柱焊缝的疲劳寿命。分析结果表明:其他条件不变的情况下,改变型钢规格和柱高,热点位置不发生变化;随着支柱高度增加,疲劳寿命降低21%左右;随着型钢截面的增大,疲劳寿命增加23%左右。     

铁路延伸客服系统设计方案研究

随着客运专线铁路及电子商务的兴起，延伸铁路客运服务信息系统将为旅客提供更加便捷高效的服务，介绍了延伸旅客服务信息系统的总体方案及设计。     

In-use measurement of the activity, fuel use, and emissions of eight cement mixer trucks operated on each of petroleum diesel and soy-based B20 biodiesel

In-use micro-scale fuel use and emission rates were measured for eight cement mixer trucks using a portable emission measurement system. Each vehicle was tested on petroleum diesel and B20 biodiesel. Average fuel use and emission rates increase monotonically versus engine manifold absolute pressure. A typical duty cycle includes loading at a cement plant, transit while loaded from the cement plant to work site, creeping in a queue of vehicles at the worksite, unloading, and transit without load from the site to the plant. For B20 versus petroleum diesel, there is no significant change in the rate of fuel use, CO₂ emissions, and NO emissions, and significant decreases in emissions for CO, hydrocarbons, and particulate matter. For loaded versus unloaded onroad travel, fuel use and CO₂ emissions rates are approximately 60% higher and the rates for other pollutants are approximately 30–50% higher. A substantial portion of cycle emissions occurred at the work site. Inter-vehicle and intra-cycle variability are also quantified using the micro-scale methodology.     

磁动力在新能源汽车上的应用

电磁汽车发动机是一款,利用永磁铁和电磁铁同磁极之间,相互排斥的原理,设计出来的一款全新理念的汽车发动机。     

基于C／S和B／S模式结合的铁路信号微机监测网络系统

本文提出了基于C／S和B／S模式结合的微机监测系统，介绍了其结构设计和功能设计，并对系统所采用的相关技术进行了讨论