西安地铁隧道中隔墙加台阶法施工诱发的邻近桥桩变形及其控制措施

采用FLAC3D软件预测了地铁中隔墙加台阶法施工诱发的邻近桥桩变形规律,结果表明:桥桩最大水平变形和倾斜率均超出变形允许值,必须对既有桥桩采取加固措施才能确保其在地铁施工期间的安全使用。提出了采用袖阀管注浆技术控制桥桩变形的措施,并制定了现场监测方案。实测结果表明,加固措施能够确保桥桩变形在允许范围内,证明了提出的变形控制措施合理有效。     

地铁闸机紧急放行控制器的探讨

为了保证紧急情况下乘客的安全,地铁各车站均安装有紧急按钮,用于控制闸机的紧急放行。介绍了闸机紧急放行控制器系统构成和工作原理,分析了闸机异常放行的主要原因,并对紧急按钮采用常闭接点和常开接点的优缺点做了比较。使用常闭方式更能及时发现故障,保证紧急放行时能及时响应。     

城市轨道交通站点客流不确定性研究

为提高城市轨道交通站点客流预测的可靠性,在分析客流不确定性影响因素的基础上,基于ARIMA-GARCH模型,依据南京地铁珠江路站点客流数据对客流不确定性进行建模和预测,并从预测置信区间和无效覆盖率两方面与传统的时间序列进行对比分析,研究结果表明,ARIMA-GARCH能够较好地拟合客流波动情况,为城市轨道交通运营与管理提供理论依据。     

基于熵权-物元模型的轨道交通建设时序研究

结合轨道交通建设特点,基于物元可拓数学方法、熵权理论和关联度函数,建立轨道交通建设时序决策的熵权物元可拓模型。该方法首先结合熵权理论,根据指标差异度对评价指标进行客观赋权;其次通过客观标准对评价指标的经典域进行区间界定,利用综合关联度将多指标的评价模型转化为单目标决策;然后依据定量测算的加权综合关联度值综合判定建设时序,最后以成都市轨道交通线网进行实例分析。结果表明:该决策算法所确定的结果与实际建设时序一致,且该算法可以极大拓展研究范围,表征更多分异信息,有效支撑城市轨道交通线网建设时序的综合决策。     

Parameters optimisation of a vehicle suspension system using a particle swarm optimisation algorithm

The purpose of this paper is to determine the lumped suspension parameters that minimise a multi-objective function in a vehicle model under different standard PSD road profiles. This optimisation tries to meet the rms vertical acceleration weighted limits for human sensitivity curves from ISO 2631 [ISO-2631: guide for evaluation of human exposure to whole-body vibration. Europe; 1997] at the driver's seat, the road holding capability and the suspension working space. The vehicle is modelled in the frequency domain using eight degrees of freedom under a random road profile. The particle swarm optimisation and sequential quadratic programming algorithms are used to obtain the suspension optimal parameters in different road profile and vehicle velocity conditions. A sensitivity analysis is performed using the obtained results and, in Class G road profile, the seat damping has the major influence on the minimisation of the multi-objective function. The influence of vehicle parameters in vibration attenuation is analysed and it is concluded that the front suspension stiffness should be less stiff than the rear ones when the driver's seat relative position is located forward the centre of gravity of the car body. Graphs and tables for the behaviour of suspension parameters related to road classes, used algorithms and velocities are presented to illustrate the results. In Class A road profile it was possible to find optimal parameters within the boundaries of the design variables that resulted in acceptable values for the comfort, road holding and suspension working space.     

温州状元岙化工码头工程潮流泥沙数模研究

采用水动力泥沙条件、底床冲淤演变分析及二维潮流泥沙数值模拟手段,对拟建的温州港状元岙港区化工码头工程方案进行了研究。研究结果表明:(1)工程海区潮汐属于正规半日潮类型,为强潮海区;(2)工程海区潮流性质属于不规则半日浅海潮流,潮流运动呈往复流形式;(3)工程海域深槽多年来在波浪潮流作用下一直处于稳定状态;(4)规划的化工码头走向与涨落潮流走向基本一致;(5)规划的化工码头实施后工程附近海区的涨落潮流速呈增加趋势,码头前沿会略有冲刷;(6)化工码头建设对锚地流场没有影响;(7)化工码头工程方案是合理可行的。     

模糊层次分析法在高技术企业创业环境评价中的应用

研究高技术企业创业环境评价问题，运用系统分析方法构建了高技术企业创业环境评价指标体系，在此基础上深入研究了模糊层次分析法在高技术企业创业环境评价中的具体运用．结果表明模糊层次分析法是高技术企业创业环境评价的一个新的、有效的方法，最后对模糊层次分析法应用的局限性作了简要的分析．     

An easy procedure to determine Magic Formula parameters: a comparative study between the starting value optimization technique and the IMMa optimization algorithm

In 2004, a new searching algorithm for Magic Formula tyre model parameters was presented. Now, a summary of the results, for pure and combined slip, that this algorithm is able to achieve is presented. The Magic Formula tyre model needs a set of parameters to describe the tyre properties. The determination of these parameters is dealt with in this article. A new method, called IMMa Optimization Algorithm (IOA), based on genetic techniques, is used to determine these parameters. Here, we show the computational cost that has been used to obtain the optimum parameters of every characteristic of the Magic Formula tyre model, called Delft Tyre 96. The main advantages of the method are its simplicity of implementation and its fast convergence to optimal solution, with no need of deep knowledge of the searching space. Hence, to start the search, it is not necessary to know a set of starting values of the Magic Formula parameters (null sensitivity to starting values). The search can be started with a randomly generated set of parameters between [0, 1]. Nowadays, MF-Tool, an application developed by TNO, uses an optimization technique to fit Magic Formula parameters from Matlab toolbox [van Oosten, J.J.M. and Bakker, E., 1993, {Determination of magic tyre model parameters}. Vehicle System Dynamics, 21, 19–29; van Oosten, J.J.M., Savi, C., Augustin, M., Bouhet, O., Sommer, J. and Colinot, J.P., 1999, {Time, tire, measurements, forces and moments, a new standard for steady state cornering tyre testing}. EAEC Conference, Barcelona, 30 June–2 July.]. We refer to that algorithm as the starting value optimization technique. The comparison between the optimization technique employed by TNO and the proposed IOA method is discussed in this article. In order to give a relative idea of adjustment accuracy, the sum-squared error and the mean-squared error, from the curves of the tyre model with the parameters optimized by both applications compared with test data are evaluated.     

Flexible long range planning using low cost information

Contemporary transport planning requires a flexible modelling approach which can be used to monitor the implementation of a long term plan checking regularly its short term performance with easily available data; the original model is periodically updated using low cost information and this allows the evaluation of the changes to the plan which may be required. Such an approach requires models suited to regular updating and to the use of data from different sources. Models to update trip matrices from traffic counts have been available for some time; however, the estimation and/or updating of other model stages with low cost data has escaped analytical treatment. The paper discusses this idea and formulates the updating problem for an example involving a joint destination/mode choice model under various assumptions about the nature of the available data. Analytical solutions are proposed as well as some general conclusions.requests for offprints     

Assessment of the volume of fluid method for free-surface wave flow

This study was concerned with the free-surface wave flow around a surface-piercing foil. The volume of fluid method implemented in a Navier–Stokes computational fluid dynamics code was employed. Three widely used discretization schemes for the volume of fluid method were assessed for a test case that involved general ship waves, spilling breaking waves in front of the leading edge, and bubbly free surfaces in separated regions. A single computational approach was selected for the comparison, and a grid-dependence study was carried out. The computational results were validated against existing experimental data, showing good agreement. The validation results suggest that all three discretization schemes perform well, but the best and most efficient results were obtained using the high-resolution interface capturing scheme.