几种典型的大型集装箱船导轨结构特性对比计算分析

本文以固定装载型式导轨和混合装载型式导轨为研究对象,基于有限元方法分析了不同集装箱装载工况对导轨强度、刚度的影响,同时在相同集装箱装载工况下,对不同导轨的强度、刚度进行了对比分析。结果可为集装箱导轨的设计优化提供了一定的参考。     

大型豪华邮轮结构设计的难点及对策分析

简述了大型豪华邮轮的结构特点,介绍了大型豪华邮轮的特殊要求,指出了结构设计中存在的困难和问题,研究了解决困难的对策和方法,对于大型豪华邮轮的结构设计,关键在于特定结构设计水平的提升,薄板加工焊接变形的控制,振动和噪声的预防,结构细节的处理,结构与设施的协调等。     

基于正交设计的船用柴油机燃烧系统参数匹配及优化

为研究柴油机燃烧系统参数匹配对柴油机动力和排放性能的影响,首先分别利用AVL_BOOST和AVL_FIRE仿真软件建立4190ZLC-2型船用柴油机整机模型和缸内燃烧高压循环模型,然后基于已建模型应用正交试验设计方法安排柴油机进气系统、喷油系统和燃烧室结构尺寸参数匹配仿真计算。研究结果表明,通过极差分析可以得出燃烧系统参数对4190ZLC-2型柴油机性能的影响主次顺序。以柴油机指示功率为评价指标时,参数组合0.26 mm-28°CA-160°-0.9-145 mm-2.6 mm-22 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的指示功率为63.40 k W,比原机仿真值高15%;以NOX排放为评价指标时,参数组合0.30 mm-24°CA-140°-0.4-135 mm-6.6 mm-14 mm(喷孔直径-喷油提前角-油束夹角-涡流比-喉口直径-凸台高度-凹坑半径)对应的NOX排放质量分数为0.015 7%,比原机仿真值低30.2%。     

钢板桩常规施工工艺及涂层受损问题

针对钢板桩施工问题,以马来西亚槟城吹填二期(STP2)工程为例,对Z型钢板沉桩机具选型及沉桩工艺进行研究。通过对比3种国外常用的钢板桩沉桩阻力估算方法及含导向架和无导向架施工的实际应用效果,优选出适合沉桩的振动锤型,并总结出两种沉桩方法的优劣性及适用情况,总结陆上钢板桩作业涂层常见受损问题及修复措施。     

How do economies of density in container handling operations affect ships’ time and emissions in port? Evidence from Norwegian container terminals

Efficient port services are prerequisites for competitive and sustainable maritime transports. This paper makes advances in studying the determinants of the time that ships spend in port and the associated emissions to air. We estimate a production model for cargo handling based on a unique dataset containing each port of call at the largest container terminals in Norway in 2014. In turn, we use auxiliary engine emission factors to estimate particulate matter and nitrogen oxide emissions from ships at berth, to determine how the corresponding damage costs of air pollution vary with container throughput, location, and terminal investments. We find that Norwegian container terminals operate under increasing returns to density. Small ships that unload few containers are far from reaping economies of density, leading to high marginal time requirements for container handling and consequently high marginal external costs. From a Pigouvian taxation perspective, port charges should therefore be regressive in the number of containers handled. Moreover, we find that the external costs of maritime transports are severely understated when port operations are ignored. Our model allows determining the marginal productivities of port facilities. Thereby, it is instrumental in designing port charges that are diversified according to the quantity of containers handled and the service quality (i.e., the speed of handling operations). Regarding contextual factors, we find that establishing high-frequent liner services improves the ship working rate, while simultaneous calls at a terminal impede productivity. The type of container (loading/unloading; empty/laden) also appears to influence the duration of ship working.     

Evaluation of pedestrian crosswalk level of service (LOS) in perspective of type of land-use

In India pedestrians usually cross the road at mid-block crosswalks due to ease of access to their destination or the development of adjacent land use types such as shopping, business areas, school and residential areas. The behaviour of pedestrian will change with respect to different land use type and this change in behaviour of pedestrian further reflects change in perceived level of service (LOS). So, it is important to evaluate the quality of service of such crossing facilities with respect to different land-use type under mixed traffic conditions. In this framework, pedestrian perceived LOS were collected with respect to different land-use type such as shopping, residential and business areas. The ordered probit (OP) model was developed by using NLOGIT software package, with number of vehicles encountered, road crossing difficulty as well as safety considered as primary factors along with pedestrian individual factors (gender and age), land-use type and roadway geometry. From the model results, it has been concluded that perceived safety, crossing difficulty, land-use condition, number of vehicles encountered, median width and number of lanes have significant effect on pedestrian perceived LOS at unprotected (un-signalized) mid-block crosswalks in mixed traffic scenario. The inferences of these results highlights the importance of land use planning in designing a new set of pedestrian access facilities for unprotected mid-block crosswalks under mixed traffic conditions. Also the study results would be useful for evaluating pedestrian accessibility taking into account different land-use type and planning required degree of segregation with vehicular movement at unprotected mid-block crosswalk locations.     

U型管式换热器的质量控制

U型管式换热器属于列管换热器的一种,被广泛应用在循环水冷却高温气体装置中。根据U型管式换热器的结构特点和技术原理,针对设备在使用过程中可能出现的问题,在整个材料采购和制造过程中,对换热器中管板制造加工、U型管成形及换热管与管板的焊接等制造的关键和难点予以质量控制,保证产品质量,使设备按设计要求制造完毕后安全有效地运行。     

An operational activity-based method to estimate CO2 emissions from container shipping considering empty container repositioning

This paper develops an operational activity-based method to estimate CO₂ emissions from container shipping in contrasts to the traditional aggregated activity-based method. Two case studies investigate the impacts of empty container repositioning policies and port handling capacity on CO₂ emission index. The results show that the aggregated method could well overestimate CO₂ emissions and the operational activity-based method is more appropriate. The paper also demonstrates that high port-handling capacity and efficient empty container repositioning could reduce CO₂ emissions in seaborne container transportation.     

缆索吊装系统在钢桁架拱桥上构施工中的应用

文章以新世纪大桥主桥钢桁架上构施工为例,对施工所需缆索吊装系统的承重主索、塔架、地锚、扣挂体系进行了介绍,并阐述了利用缆索吊装系统进行钢桁架拱桥上构施工的工艺流程及技术要点。     

箱形拱桥结构检测及加固处理

文章以梧州西江大桥箱形拱桥为例,在对桥梁结构进行外观检测的基础上,利用Midas Civil 2010建立模型,通过静载和动载试验分析了该桥的承载能力及结构力学特性,提出了相应的维修加固措施,并探讨了维修加固处理的工程效果。