Time-variant bulk carrier reliability analysis in pure bending intact and damage conditions

Time-variant reliability analysis of a corroded bulk carrier in intact and damage conditions is performed by First-Order (FORM), Second-Order (SORM) Reliability Methods and Importance Sampling simulation. Annual failure probabilities are determined up to 25-year ship lifetime, accounting for time-variant corrosion wastage of structural members contributing to hull girder strength. Statistical properties of hull girder capacity are determined by Monte Carlo simulation, applying three correlation models among corrosion wastages of structural members contributing to hull girder strength, namely no correlation, full correlation and full correlation among wastages of structural members belonging to the same category of compartments. A modified incremental-iterative method is applied, to account for instantaneous neutral axis rotation, in case of asymmetrical damage conditions, as for collision and grounding events. Incidence of intact/damage condition, as well as correlation among corrosion wastages, on annual sagging/hogging time-variant failure probability is investigated and discussed. Time-variant sensitivity analyses for intact and damage conditions are also performed, to investigate the incidence of random variables' uncertainties on the attained failure probability. Finally, the bulk carrier section scheme, benchmarked in the last ISSC Report, is applied as test case.     

移动闭塞系统区间通过能力分析及参数计算

移动闭塞条件下“闭塞分区”呈现出“移动”和“长度变化”的特征,其区间通过能力的计算较固定闭塞系统更加复杂。本文建立了移动闭塞系统区间通过能力的数学模型,对区间通过能力与列车追踪运行速度、跟驰车距和列车性能等参数之间的相互关系进行了定性、定量分析,并就关鍵参数的计算方法进行了深入的讨论,对移动闭塞条件下的列车运行控制与行车组织有一定的参考价值。     

重载货车摩擦缓冲器阻抗特性的数值模拟

为预测摩擦缓冲器的实际工作状态,从几何特征和作用原理的角度,建立详细的MT-2型缓冲器理论模型。首先,通过对缓冲器内部各摩擦元件的运动学和静力学分析,推导出缓冲器在准静态下的阻抗特性;其次,引入附加摩擦系数量化各摩擦元件之间动静态摩擦过渡时的黏滞补偿,并模拟出缓冲器在动态下的阻抗特性;最后,利用C80型货车冲击试验数据对该缓冲器的理论模型进行验证。验证结果表明:总体上,数值模拟和现场试验下的缓冲器示功曲线基本吻合,说明模型的正确性;局部上数值模拟中缓冲器从加载Ⅰ阶段过渡至加载Ⅱ阶段的突变现象在冲击试验中表现的并不明显,还有待进一步完善。     

半断面法超前周边注浆在煤层采空区治理中的应用

以煤层采空区治理工程为依托,详细介绍了超前周边注浆参数的选取原则,讨论了全断面注浆和半断面注浆作业的优缺点和适用范围.介绍了周边注浆施工材料、设备及施工工艺,采用分析法和检查孔法对注浆效果进行了对比分析.结果表明,采用超前周边注浆加固,能有效控制涌水量,加固松散岩体.     

上海市道路隧道结构设计标准综述

通过调研和总结上海已建15座盾构隧道的设计资料,对现有隧道存在的病害进行了归类分析,提出了隧道病害的预防与治理措施;对明挖段的围护设计选型、结构工程规模和盾构隧道几何设计参数进行了统计分析,提出了明挖接线段围护结构选型及插入比的建议,明确了明挖结构的计算模型和计算参数;对已建盾构隧道的埋深、最小曲线半径、最小线间距、最大坡度等几何参数进行了详细分析,总结出了工作井平面尺寸的确定方法和盾构进出洞的关键技术。     

Detection of nonlinearity effects in structural integrity monitoring methods for offshore jacket-type structures based on principal component analysis

The detection of changes in the dynamic behavior of structures is an important issue in structural safety assessment. The development of detection methods assumes greater significance in the case of offshore platforms because the inherent problems are compounded by the harsh environment. Here, we describe an instrumented physical model for the structural health monitoring of an offshore jacket-type structure and the results of tests in several different damage scenarios. In a comparative investigation of two different methods, we discuss the difficulties of implementing damage detection techniques for complex structures, such as offshore platforms. The combined algorithm of a fuzzy logic system and a model updating method are briefly discussed, and a method based on stochastic autoregressive moving average with exogenous input is adopted for the structure. The consideration of uncertainties and the effects of nonlinearity were major objectives. So, the methods were also investigated based on the test scenarios consisting of the physical model with a geometric nonlinearity. The principal component analysis method was utilized for the detection of nonlinearity in the recorded data. The results show that the developed methods are suitable for damage classification, but the quality of the acquired signals must be considered an important factor influencing successful classification. The development of these methods may be extremely useful, as such technologies could be applied for offshore platforms in service, enabling damage detection with fewer false alarms.     

磁力摩擦式辅助驱动在TBM连续皮带机中的应用

长大隧道TBM(tunnel boring machine)施工大多采用连续皮带机出渣,当运输距离较大时通常需要在中间增设辅助驱动,以降低胶带最大张力,从而降低胶带强度。为了提高辅助驱动的工程适应性,研发了磁力摩擦式辅助驱动系统,具有驱动力大、无二次转载、胶带无二次冲击损伤、结构简单、故障点少、结构紧凑占用空间小、安装方便和配置灵活等特点。该成果可用于采用钢丝绳芯胶带的TBM连续皮带机、支洞皮带机以及其他需要辅助驱动的胶带输送机,并在山西省中部引黄工程TBM1标段成功应用,具有广阔的推广应用价值。     

大断面异形盾构隧道弯矩传递系数原型加载试验研究

由于异形盾构隧道特殊的结构断面型式,管片设计暂无相关规范可循,故基于原型三环管片力学加载试验对异形盾构管片环向接头弯矩传递系数进行研究,研究结果表明:1)随埋深增加,异形盾构管片结构整体刚度提升,但由于各接头刚度与相邻管片结构刚度比随埋深增加变化规律不一致,异形盾构管片接头弯矩传递能力呈部分减弱部分增强的现象;2)同埋深条件下,随着侧压力系数的增加,除右拱腰处接头外,其余接头弯矩传递能力随着接头刚度与相邻管片结构刚度比的增大而逐渐增强;3)随着埋深增加,各接头弯矩传递能力对侧压力系数的敏感程度逐渐减弱;4)极限破坏后,异形盾构管片内外弧面裂缝的分布规律证明了明显的弯矩传递现象。     

复杂地形条件下桥隧相连隧道洞口结构设计研究

蒙华铁路坪桥1号隧道进口洞顶基岩外凸、洞顶以下岩面高且直立、洞顶上部地形偏压高陡,地形条件极其复杂。营盘山大桥与坪桥1号隧道进口紧密相连,存在桥台与隧道洞门结构相互干扰以及边坡防护、隧道出洞和洞口场地布置等一系列难题,设计难度极大。为解决这些难题,通过对现场实际地形、地质情况进行研究,对比分析"整体式"与"分离式"桥隧相连结构的优缺点,提出桥台与隧道相结合的"整体式"桥隧相连结构方案;同时,针对地形偏压高陡,提出非对称结构设计方案,实现了隧道"零"仰坡出洞,解决了洞口边坡防护的难题;最后,提出架立临时贝雷梁的方案,解决了隧道出洞及洞口场地布置的难题。     

基于地基回弹因素的盾构隧道管片上浮预测

针对软弱地层盾构隧道管片脱出盾尾后出现的上浮问题,分析盾构施工过程中管片上浮的诱因,得出软弱地层中管片的上浮主要是地层应力重分布产生的地基回弹力引起的。在此基础上建立隧道开挖动态模型,分析隧道上浮量变化规律以及地层特性对管片上浮量的影响规律,得出地层弹性模量和管片上浮量呈一定的指数关系,且弹性模量对管片上浮量的影响远大于地层黏聚力和内摩擦角。通过力平衡理论计算盾构开挖引起的地层回弹力、管片上浮量以及隧道上浮影响的地层高度范围,并通过对珠江狮子洋工程管片上浮量的计算与实测对比,证明该公式的合理性,为盾构隧道工程中考虑地基抗力引起的管片上浮量预测提供一种新的方法。