数值模拟在土钉支护公路边坡工程设计的应用

采用岩土工程分析软件，结合某公路边坡开挖的具体实例，对土钉支护进行数值模拟，对边坡开挖和土钉支护过程中的土体位移场、应力场及土钉的受力变化等进行了模拟与分析。结果表明计算值与实测值较为接近，建立的计算模型对土钉支护的受力变形分析是适用的。同时，在改变模型参数的基础上初步探讨了土钉长度、土钉倾角对边坡位移与土钉最大轴力的影响，得出了一些在土钉支护工程中可资应用的结论。     

公路岩质边坡稳定性的工程地质分析

岩质边坡稳定性问题对公路工程建设的决策、造价和工期具有重要的影响和作用;同时,它还是公路边坡工程设计与施工的重要依据条件之一。针对漳龙高速公路XX段岩质边坡的稳定性问题,从边坡的地形地貌特征、岩石类型与特征、岩体结构类型与特性、结构面发育度与优势面状态等多方面因素,并采用赤平极射投影法;对该段岩质边坡的稳定性进行定性的工程地质分析。     

GPS一机多天线技术在公路边坡灾害监测中的应用研究

文章主要介绍了GPS一机多天线监测系统及其在公路边坡变形监测中的实际应用情况,通过实践可以证明:GPS一机多天线监测系统的定位精度可以达到3～5mm,与常规的GPS静态相对定位的精度相当,同时能够大大降低GPS监测系统的成本,使得公路边坡灾害监测能够实现高精度、自动化和全天候等目标。     

降雨条件下道路边坡地下水渗流分析

降雨是影响道路边坡稳定的主要因素之一,根据岩土饱和-非饱和渗流理论,考虑降雨入渗的影响,利用有限元方法,对强降雨条件下公路边坡地下水渗流场动态进行了数值模拟,得到了降雨过程中边坡地下水压力水头、总水头变化、流速的变化规律,研究结果为道路边坡的稳定性分析和滑坡预测提供重要的分析数据。     

高速铁路路基边坡纤维团粒喷播生态防护技术

针对高速铁路路基绿化工程高要求、少维护等特点,提出纤维团粒喷播技术,并详细阐述了其机理及特点.通过在京雄城际铁路路基边坡工程中的应用,归纳总结了该技术施工工艺流程:平整坡面→坡面覆土→铺设铁丝网→喷播基质→养护管理.喷播基质是利用喷播机械将性能优越的基质材料喷附至铁路路基坡面上的.工程应用表明该技术施工快,质量好,养护维修量小,经济性高.     

Dynamic stride length adaptation according to utility and personal space

Pedestrians adjust both speed and stride length when they navigate difficult situations such as tight corners or dense crowds. They try to avoid collisions and to preserve their personal space. State-of-the-art pedestrian motion models automatically reduce speed in dense crowds simply because there is no space where the pedestrians could go. The stride length and its correct adaptation, however, are rarely considered. This leads to artefacts that impact macroscopic observation parameters such as densities in front of bottlenecks and, through this, flow. Hence modelling stride adaptation is important to increase the predictive power of pedestrian models. To achieve this we reformulate the problem as an optimisation problem on a disk around the pedestrian. Each pedestrian seeks the position that is most attractive in a sense of balanced goals between the search for targets, the need for individual space and the need to keep a distance from obstacles. The need for space is modelled according to findings from psychology defining zones around a person that, when invaded, cause unease. The result is a fully automatic adjustment that allows calibration through meaningful social parameters and that gives visually natural results with an excellent fit to measured experimental data.     

The symmetric intersection design and traffic control optimization

It is well recognized that the left-turning movement reduces the intersection capacity significantly, because exclusive left turn phases are needed to discharge left turn vehicles only. This paper proposes the concept of Left-Hand Traffic (LHT) arterial, on where vehicles follow left-hand traffic rules as in England and India. The unconventional intersection where a LHT arterial intersects with a Right-Hand Traffic (RHT) arterial is named as symmetric intersection. It is only need three basic signal phases to separate all conflicts at symmetric intersection, while it at least need four signal phases at a conventional intersection. So, compared with the conventional intersection, the symmetric intersection can provide longer green time for the left-turning and the through movement, which can increase the capacity significantly. Through-movement waiting areas (TWAs) can be set at the symmetric intersection effectively, which can increase the capacity and short the cycle length furthermore. And the symmetric intersection is Channelized to improve the safety of TWAs. The Binary-Mixed-Integer-Linear-Programming (BMILP) model is employed to formulate the capacity maximization problem and signal cycle length minimization problem of the symmetric intersection. The BMILP model can be solved by standard branch-and-bound algorithms efficiently and outputs the lane allocation, signal timing decisions, and other decisions. Experiments analysis shows that the symmetric intersection with TWAs can increase the capacity and short the signal cycle length.     

向量法在不规则隧道边仰坡面积计算中的应用

根据隧道边仰坡三维坐标测量数据,通过计算边仰坡斜面和投影水平面的法向量,进而计算两面之间夹角的方法,反算边仰坡斜面面积,在类似不规则隧道边仰坡等斜面面积计算中具有广泛的应用价值。     

中国TBM施工技术进展、挑战及对策

总结我国近30年来TBM设计与施工技术的发展历程,可归纳为以下5个阶段:1)研发探索和试用阶段;2)以国外施工承包商为主体,采用国外设计制造TBM施工我国隧道工程阶段;3)独立进行TBM招标采购和选型设计,并建立起自主的TBM施工队伍阶段;4)与国外厂家联合设计制造TBM,工程应用和自主施工快速发展阶段;5)实现TBM国产化,面向国内外TBM工程市场自主施工阶段。通过我国不同时期TBM施工的典型工程,介绍我国在复杂地质、大坡度、高海拔、不同直径、不同机型、超长隧洞TBM施工方面取得的经验、技术积累和业绩,展示我国TBM在穿越断层破碎带、软弱变形、岩爆、涌水等不良地质洞段取得的一系列施工新技术,以及最高月进尺1 868 m、平均月进尺超过600 m和掘进作业利用率超过40%的掘进技术水平。分析TBM在极硬岩、大断层破碎带、软弱大变形围岩、强岩爆围岩、涌水突泥洞段、高地热隧洞和超长隧洞工程中施工面临的风险和挑战,并提出一些相应的技术措施和对策,期望这些措施和对策在未来大量实际工程中进一步得到实践验证、优化和改进,不断积累和创新TBM设计与施工新技术。     

广东山区高速公路挖方边坡常见病害及防治策略

广东省山区高速公路发展迅速,但诸多挖方边坡在修建过程中就产生了不同程度的病害。这些病害产生的原因包括气候、地质条件和人为因素,给施工工期、造价及安全管理造成较大影响。鉴于塌方病害在广东地区山区高速公路挖方边坡中较为常见,根据破坏方式及影响范围的深度将其划分为浅层溜塌、浅层滑塌和深层滑塌(滑坡)。结合工程建设经验,提出了山区路堑边坡的防治策略,可为类似工程的设计、施工提供借鉴。