LNG船舷侧碰撞损伤场景下的极限强度研究

液化天然气(LNG)船的船体极限强度是衡量其安全性及环境适应性的重要指标。LNG船在受到撞击损伤后的安全性,不仅取决于船体结构的剩余极限强度,还取决于其围护系统中的绝缘箱能否在船体损伤状态下承受结构变形所引起的应力载荷。利用有限元数值仿真技术和ABAQUS软件,建立LNG船液舱围护系统以及舱段的有限元模型,模拟LNG船舷侧受撞击场景。在碰撞损伤基础上,对含有液舱围护系统的LNG船舱段开展极限强度研究,获取LNG船舱段结构的极限承载能力。研究发现在船体达到极限强度状态之前,液舱围护系统不会失效。     

超大型自航抓斗挖泥船作业流程载荷分析

以大型自航抓斗挖泥船为研究对象,建立相应的水动力计算模型。主要研究抓斗挖泥作业不同阶段下船舶运动、锚泊线受力情况以及其随不同环境载荷的变化规律,为船舶安全作业提供依据。研究结果表明,船舶在抓斗旋转和卸料时最为危险,船舶横荡、横摇及各锚泊线张力受其影响很大,实际作业时应尽量保持迎浪状态,进而确保船舶作业安全。     

长江南京以下12.5m深水航道二期工程安全应急方案研究

安全应急预案对于提高安全事故中的救援能力、减少安全事故带来的损失具有重要的意义。以南京以下12.5m深水航道二期工程为背景,对拟定的安全应急预案进行分析研究,总结出安全应急预案体系包括综合安全应急预案、专项应急预案和现场处置方案,提炼各层次预案对应的事件类型和具体内容,并编制首接责任制下的应急组织机构和应急流程。     

高性能排水板在淤泥地基筑堤工程中的应用效果

为验证采用高性能排水板作为淤泥质土径向排水通道的适用性和效果,在连云港徐圩港区设置一段高性能排水板试验段,埋设部分原位观测仪器。通过高性能排水板和普通排水板标段地基固结度和深层水平位移的对比来研究高性能排水板的应用效果。对比结果表明:高性能排水板应用效果良好;同样工期内,高性能排水板地基比普通排水板试验段地基的固结度高,深层水平位移小。     

荷载场和氯离子扩散场共同作用下的钢筋混凝土构件分析

为讨论荷载场与氯离子扩散场的共同作用,引入考虑荷载作用下的混凝土损伤影响函数Fd,采用ABAQUS有限元软件的USDFLD子程序开发功能,在内置的Mass Diffusion模块中考虑荷载作用和力学损伤对氯离子扩散的影响,实现钢筋混凝土构件层次荷载场和氯离子扩散场的多物理场共同作用分析。结果表明:有限元计算结果和试验结果吻合良好;随着荷载比的增大,氯离子在混凝土中的扩散速度逐渐加快,且拉应力对氯离子扩散的促进作用远大于压应力。为探究氯离子在混凝土中的扩散规律提供了一种新方法。     

Comparative Analysis of Calculation Methods for Jacking Force of Jacking Pipes北大核心CSCD

Jacking force is the most important parameter in jacking pipe engineering, and reasonable calculation of jacking forces plays an important role in safe and smooth pipe jacking construction. There are many calculation methods for pipe jacking force at present, and the calculation results may be affected to some extent by different cal⁃ culation methods. For this reason, calculation methods of jacking force (frictional resistance) were collected and a comparative analysis was conducted with aspects to the advantages, disadvantages and applicabilities. The results show that as for the jacking force calculated by empirical formulae, the soil layer classifications corresponding to giv⁃ en frictional force per unit area and relevant factors to be considered are different, and the values of frictional force per unit area between pipe and soil in the same soil layer are also different; as for the jacking force calculated by theo⁃ retical formulae, the calculation methods for vertical earth pressure at crown are different and much effected by the pipe buried depth; as for the jacking force calculated by numerical simulation, the selected theories for the simula⁃ tion program and the construction factors to be considered during simulation are different. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

The role of volume-delay functions in forecasting and evaluating congestion charging schemes: the Stockholm case

This paper uses observations from before and during the Stockkholm congestion charging trial in order to validate and improve a transportation model for Stockholm. The model overestimates the impact of the charges on traffic volumes while at the same time it substantially underestimates the impact on travel times. These forecast errors lead to considerable underestimation of economic benefits which are dominated by travel time savings. The source of error lies in the static assignment that is used in the model. Making the volume-delay functions (VDFs) steeper only marginally improves the quality of forecast but strongly impacts the result of benefit calculations. We therefore conclude that the dynamic assignment is crucial for an informed decision on introducing measures aimed at relieving congestion. However, in the absence of such a calibrated dynamic model for a city, we recommend that at least a sensitivity analysis with respect to the slope of VDFs is performed.     

LNG卸料臂与船对接法兰面泄漏分析

LNG卸料臂是LNG卸载过程中最重要的设备之一,而卸载过程中卸料臂与船对接法兰面最易发生泄漏,因此避免其泄漏很重要。文中以某LNG接收站为例,简要介绍卸料臂预冷流程;对曾经发生过的泄漏展开分析,结果发现预冷速度过快是造成对接法兰面泄漏的主要原因;提出了相应的改进措施。改进之后,此LNG接收站卸船期间再未出现卸料臂与船对接法兰面泄漏的问题。     

探讨危旧桥梁加固的有关技术问题

随着国家经济建设脚步的加快,路桥的建设技术也在不断的进步,危旧桥梁的加固处理也成为桥梁建设的热点话题之一。因为公路车流量的增多,在上世纪末建设的桥梁一直都存在过载使用的问题,过多的重型车辆对危旧桥梁的使用也是一项巨大的考验。在一些使用年限比较久的桥梁中,出现了桥体老化现象。本文就危旧桥梁加固的有关技术问题进行了探讨。     

Bush-based sensitivity analysis for approximating subnetwork diversion

Subnetwork analysis is often used in traffic assignment problems to reduce the size of the network being analyzed, with a corresponding decrease in computation time. This is particularly important in network design, second-best pricing, or other bilevel problems in which many equilibrium runs must be solved as a subproblem to a master optimization program. A fixed trip table based on an equilibrium path flow solution is often used, but this ignores important attraction and diversion effects as drivers (globally) change routes in response to (local) subnetwork changes. This paper presents an approach for replacing a regional network with a smaller one, containing all of the subnetwork, and zones. Artificial arcs are created to represent “all paths” between each origin and subnetwork boundary node, under the assumption that the set of equilibrium routes does not change. The primary contribution of the paper is a procedure for estimating a cost function on these artificial arcs, using derivatives of the equilibrium travel times between the end nodes to create a Taylor series. A bush-based representation allows rapid calculation of these derivatives. Two methods for calculating these derivatives are presented, one based on network transformations and resembling techniques used in the analysis of resistive circuits, and another based on iterated solution of a nested set of linear equations. These methods are applied to two networks, one small and artificial, and the other a regional network representing the Austin, Texas metropolitan area. These demonstrations show substantial improvement in accuracy as compared to using a fixed table, and demonstrate the efficiency of the proposed approach.