西部公路发展策略研究

采用SWOT分析法作为西部公路发展策略的制定方法,在对西部公路交通系统的内外部环境影响因素归纳、剖析的基础上,给出了西部公路内外部环境分析与评价的方法,按重要性确定了西部公路发展环境的优势(S)与劣势(W)、机会(O)和威胁(T)因素,并采用定量与定性方法相结合提出了西部公路发展的建议策略,为西部公路发展在策略层面提供了理论指导。     

公路截水沟设计和典型结构

对公路排水系统中的截水沟设计流量进行估计,自然坡面的截水沟推荐采用梯形断面,人工坡面的截水沟横断面推荐梯形、矩形、L形和浅三角形4种形式,进而,给出了可供设计应用的各种典型截水沟的流量与沟底坡度关系图。     

激励措施在团队管理中的应用

文章以南宁高速公路运营有限公司团队管理为例,介绍了高速公路运营管理团队的构成特点及存在的问题,提出了基于考评激励、人才培养激励、目标激励、竞赛激励、尊重与关怀激励的团队管理措施,并阐述了激励措施在团队建设中的实践效果。     

Vegetation cover at right of way locations

This research evaluated the status of vegetation cover at right of way locations. Site factors that contributed to low and high ground cover along roadsides and medians were identified. Twenty-nine roadside and median study sites incorporated variability in soil type, elevation, vegetation establishment and cover, seed mixture, slope, aspect, time since planting, and climate. Vegetation cover was measured, and species distribution was identified. Slopes, aspects of the sloping face, and elevations were recorded. Soil samples were tested for nutrients, minerals, texture, and pH. Approximately 50% of the test sites met the 70% cover criteria. Locations of the worst cover (<50%) had soils with high soluble salt content (0.36–1.54 mmhos/cm) or low organic matter values (<1.7%). Vegetation cover was dominated by tall fescue (Festuca arundinacea) and crownvetch (Coronilla varia L.), two species that were included in the current seeding mixture and are considered invasive. To further promote revegetation success and persistence, both maintenance and site specific seed mixtures are needed.     

Point-to-point speed enforcement systems: Speed limits design criteria and analysis of drivers’ compliance

Point-to-point (P2P) speed enforcement is a relatively new approach to traffic law enforcement. Its technology allows vehicles whose average speed exceeds the speed limit over the controlled section to be fined. It therefore encourages compliance over distances longer than those where spot enforcement policies have been in place.In this paper, a procedure for consistently setting speed limits with such enforcement systems is proposed. Such a method has been applied to design the speed limits on two motorways in the district of Naples, Italy, where P2P enforcement systems became operational in 2009 and 2010. The speed limits, which were set using the Italian geometric design standard to assess vehicle stability and stopping sight distance, have been compared with those provided by using well-known international standards.The impact of the newly designed speed limits and of the P2P enforcement system on drivers’ speeding behaviour has been quantified for each highway section and vehicle type. In fact, accurate measurements of the average travel speeds of each vehicle crossing the enforced sections, before and after the activation of the system, were available. The migration from the old speed limits with spot speed enforcement to the new approach resulted in a notable increase in drivers’ compliance to the speed limits with a remarkable decrease in both the average of individual speeds and in their standard deviation.In addition, the analysis of 3 years of data shows that a gradual adaptation of drivers’ behaviour to the system took place. In particular, a decreasing compliance to the speed limits points to a non-optimal system management. Finally, the results of a revealed preference survey allowed us to make a behavioural interpretation regarding the significantly different impacts measured on the two motorways.     

马鞍山长江公路大桥钢塔线形控制技术

马鞍山长江公路大桥左汊主桥为（360＋2×1080＋360） m的三塔两跨悬索桥，中塔采用钢－混叠合、塔梁固结门式结构，下塔柱为预应力钢筋混凝土结构，上塔柱为钢结构，钢塔共分21个节段，首节采用浮吊安装，标准节段长6 m ，最大起吊重达235 t ，采用塔吊进行安装。为确保钢塔线形满足要求，对影响钢塔安装精度因素进行分析，形成以控制钢塔制造质量为核心、钢塔首节段安装精度为基础的线形控制流程，对钢塔节段进行工厂制造控制和现场安装控制。工厂制造控制包括零部件加工、块体制作、节段组拼、端面机加工、预拼装；现场安装控制包括首节段安装、标准节段安装、横梁与钢塔的连接。实践表明，该桥采用以控制钢塔制造精度为核心的钢塔线形控制技术进行钢塔架设施工，施工过程中钢塔制造精度和安装精度满足要求，实现了钢塔线形控制的目的。     

公路排水新理念浅析

采用公路排水新理念,介绍了201线公路坎川岭～老道排段旧路改造中公路排水的设计与方法,旨在为今后类似工程的排水设计提供参考.     

基于旅游资源特色的公路护栏设计研究

文章总结了目前常用护栏形式的特点,讨论了各种护栏形式与不同类型的旅游资源之间的协调性.基于路段与旅游资源之间关系的分析,提出了旅游公路护栏设计的基本原则,并结合工程实例,讨论了各种形式护栏特殊设计的基本思路.     

乐温高速公路排水系统设计

排水系统是高速公路设计的组成部分,它对保证高速公路的使用性能和使用寿命具有十分重要的作用.本文针对乐温高速公路排水系统,重点对中央分隔带排水、路面排水、路基边沟排水和路堑截水沟排水的设计进行了介绍,此外,还结合高速公路排水系统如何与周围景观相协调,提出了一些设计原则和具体的工程措施,可供平原微丘区排水设计时参考.     

西南山区公路沥青路面性能评价指标研究

对重庆地区公路沥青路面使用性能进行调研检测,利用现有的评价指标对调查路段的路面破损状况和路面行驶质量进行了评价.在此基础上,结合该地区高温多雨的气候特征和路面使用坏境,对路面使用性能评价指标中的路面状况指数PCI和路面结构承载力指数PSSI进行完善和修订,以便因地制宜对西南山区公路沥青路面使用性能进行科学评价.