山区高速公路填石路堤压实质量控制

目前对填石路堤的施工工艺与质量控制标准,世界各国、各地区的方法都不尽相同。本文针对填石路堤的特点,以宜长高速公路填石路堤为例,探讨和研究了山区高速公路填石路堤压实质量控制技术,将压实度、固体体积率、碾压遍数、松铺厚度、沉降率、动态模量等多种质量控制标准进行比较,从而比较合理地提出了填石路堤快速无损检测及质量控制方法。     

高速公路中收费和清分的动态解决方案

在高速公路收费和清分过程中,由于新增的高速公路和收费站点特别是环型路段的增加使得原有的静态算法已经不适宜于现实情况。本文提出了高速公路中基于最短路径和环型路段的动态收费和清分解决方案,并给出了详细的基于环型路段的动态算法。环型路段问题解决后,可以判知车辆实际行车路线,从而大幅提高收费及清分的准确性和效率。     

纯电动汽车动力系统参数选择与匹配

动力系统参数选择与匹配对电动汽车的动力性和经济性会产生很大的影响。文章在理论计算和工程分析的基础上。对电机、电池以及传动系传动比进行了参数匹配,分析了纯电动汽车传动系参数的选择对电动汽车性能的影响。ADVISOR仿真结果表明,所选动力总成部件与整车匹配后能够满足纯电动轿车动力性的要求。为纯电动汽车动力系统参数选择与匹配提供了参考。     

轮胎动态模型的阻尼和对滚动阻力及动态响应影响的分析

在综合了一些文献研究结果的基础上,基于轮胎模态参数模型,给出了不同阻尼环节对滚动阻力及轮胎以不同速度滚越障碍物的动态响应的模拟结果,并部分地与试验结果进行对比,说明具有结构阻尼环节的轮胎模型,对于两者的模拟均给出了更好的定量结果。     

增压中冷柴油机湿式气缸套周向应变的动态测试与分析

针对内燃机气缸套的动态变形问题,提出一套对湿式缸套在工作时的变形进行测试的方法。通过对增压中冷柴油机湿式气缸套周向应变的动态测试与分析,绘出缸套在工作时产生的周向变形曲线,分析缸套变形的特点以及主要影响因素。研究结果表明:增压后转速升高对缸套应变影响不明显,缸套的最大变形出现在各作用力对缸套壁面作功最大的2 200 r/m in工况。     

深中通道泄洪区下部结构宽墩对大悬臂盖梁受力的影响分析

独柱墩盖梁由于占地小、净空大、景观效果好,在市政桥梁工程甚至跨海桥梁工程中得到广泛应用.但由于采用独柱墩,墩柱横向尺寸较大,在盖梁受力分析时需考虑墩柱对盖梁受力的影响.以深中通道工程为背景,采用各种计算模型对其泄洪区引桥下部结构宽墩独柱盖梁进行详细的受力计算分析,对比分析各种模型的设计安全性和宽墩对盖梁受力的影响,从而...     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

乘用车DCT车型的动力性提升分析与实施

为满足公司的发展战略要求,需要打造一款高性能、运动操控性车型,为提升该款乘用车DCT车型的动力性和操控型,分别从车辆的起步、加速过程的扭矩发挥和换挡结束的扭矩恢复、换挡过程的扭矩交替时间和转速同步时间、换挡线加速度和动力升挡换挡线及硬件五个方面进行优化。论文对该车型的起步加速过程以及换挡过程的扭矩控制进行详细分析,并将五个优化方向分解为13个子项,分别对各子项优化效果进行分析,通过INCA软件对车辆的控制系统进行优化,经过实际道路测试满足了目标开发要求。     

Development of control models for the planning of sustainable transportation systems

Planning of sustainable transportation systems requires integration of multiple systems while considering a holistic approach. A limited amount of research has been conducted that simultaneously considers all the transportation, economic activity, environmental and social effects. The proposed research envisages incorporating considerations related to sustainability and providing solutions to stakeholders in policy making. In this paper, a dynamic model for planning and development of sustainable transportation systems is presented. This is given by a system of three nonlinear differential equations representing the dynamics of the three independent states, namely, transportation, activity, and environmental systems. A policy scenario considering investment in energy efficient technologies and its effects on the states is discussed to assist making investment decisions. Optimal control techniques are used to design the controls. The results show that it is possible to formulate an optimal control to achieve the desired target. Numerical results, based on actual parameters, are presented to illustrate the long-term trends of the states. The methodology discussed in this paper will be helpful to decision makers in making optimal decisions. The contribution of this research work is the introduction of a systems and controls methodology to develop optimal policies for the design of sustainable systems.     

W-SPSA in practice: Approximation of weight matrices and calibration of traffic simulation models

The development and calibration of complex traffic models demands parsimonious techniques, because such models often involve hundreds of thousands of unknown parameters. The Weighted Simultaneous Perturbation Stochastic Approximation (W-SPSA) algorithm has been proven more efficient than its predecessor SPSA (Spall, 1998), particularly in situations where the correlation structure of the variables is not homogeneous. This is crucial in traffic simulation models where effectively some variables (e.g. readings from certain sensors) are strongly correlated, both in time and space, with some other variables (e.g. certain OD flows). In situations with reasonably sized traffic networks, the difference is relevant considering computational constraints. However, W-SPSA relies on determining a proper weight matrix (W) that represents those correlations, and such a process has been so far an open problem, and only heuristic approaches to obtain it have been considered.This paper presents W-SPSA in a formally comprehensive way, where effectively SPSA becomes an instance of W-SPSA, and explores alternative approaches for determining the matrix W. We demonstrate that, relying on a few simplifications that marginally affect the final solution, we can obtain W matrices that considerably outperform SPSA. We analyse the performance of our proposed algorithm in two applications in motorway networks in Singapore and Portugal, using a dynamic traffic assignment model and a microscopic traffic simulator, respectively.