基于PDMS系统的城际动车组全三维设计研究

通过阐述城际动车组在Teamcenter和UG NX环境下采用数字化技术开发的过程、方法,介绍了PDMS系统文件数据的管理方式,自顶向下地适合动车组车辆协同设计的装配设计方法,大装配技术和车辆分系统出图的方法等,同时还提出并介绍了全数字化车辆模型在动车组车辆重量管理、干涉检查和设备布置优化等方面的应用,为轨道交通车辆全三维协同设计提供了一种设计参考。     

基于三维实景模型公路桥梁BIM正向设计研究

采用Midas CIM桥梁三维正向设计软件,依托濮阳至聊城高速公路卫城枢纽主线跨线桥工程,基于三维实景模型开展节点桥梁BIM正向设计。将三维模型输出的钢箱梁关键指标与传统二维设计模式输出的结果进行对比分析,结果表明三维正向设计结果可靠,可实现设计阶段BIM模型向施工阶段数字化交付。     

统计试验法在汽车零部件三维尺寸及公差设计中的应用

通过对汽车零部件设计中所采用的几种尺寸及公差设计方法的对比分析，系统地介绍了一种应用统计试验法进行尺寸及公差设计的新方法。并且探讨了采用该方法进行计算机模拟、解决三维尺寸及公差设计问题的实现方法。在尺寸及公差设计中，该方法简单、易行，而且可以获得高的计算精度。以汽车操纵杆为例，详细地说明了应用该方法进行三维尺寸及公差分析的过程，从而证明了该方法的有效性和实用性。     

地下洞室群开挖过程的有限元模拟方法研究

针对开挖顺序和施工过程对地下洞室群稳定性的影响,探讨了地下洞室群开挖过程的有限元模拟方法。在重点解决有限元模拟开挖过程的关键技术问题(如释放荷载的计算和开挖模拟的有限元实施方法等)的基础上,结合某工程实例,并综合考虑施工条件,提出了合理的开挖顺序,具有一定的理论意义和工程实用价值。     

轿车三维分离流动特性的研究

本文介绍了使用激光片光技术及激光多普勒测速仪对某型国产轿车尾流的三维分离流的尾迹和速度分布测定的试验研究。本项研究表明，光学流态显示和数字图象技术相结合，可以有效地揭示汽车的尾流结构，诊断阻力来源，本项研究为建立汽车三维分离流动的动态仿真理论模型提供了依据。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

Multi-criteria optimization of traffic signals: Mobility,safety, and environment

Two-dimensional multi-objective optimizations have been used for decades for the problems in traffic engineering although only few times so far in the optimization of signal timings. While the other engineering and science disciplines have utilized visualization of 3-dimensional Pareto fronts in the optimization studies, we have not seen many of those concepts applied to traffic signal optimization problems. To bridge the gap in the existing knowledge this study presents a methodology where 3-dimensional Pareto Fronts of signal timings, which are expressed through mobility, (surrogate) safety, and environmental factors, are optimized by use of an evolutionary algorithm. The study uses a segment of 5 signalized intersections in West Valley City, Utah, to test signal timings which provide a balance between mobility, safety and environment. In addition, a set of previous developed signal timing scenarios, including some of the Connected Vehicle technologies such as GLOSA, were conducted to evaluate the quality of the 3-dimensional Pareto front solutions. The results show success of 3-dimensinal Pareto fronts moving towards optimality. The resulting signal timing plans do not show large differences between themselves but all improve on the signal timings from the field, significantly. The commonly used optimization of standard single-objective functions shows robust solutions. The new set of Connected Vehicle technologies also shows promising benefits, especially in the area of reducing inter-vehicular friction. The resulting timing plans from two optimization sets (constrained and unconstrained) show that environmental and safe signal timings coincide but somewhat contradict mobility. Further research is needed to apply similar concepts on a variety of networks and traffic conditions before generalizing findings.     

车务可视化信息系统设计与实现

车务可视化信息系统通过三维模型及虚拟漫游的展现形式,将铁路运行及运营的动态信息进行集成和柔性展示,实现旅客服务信息及运输管理相关数据的整合,通过可视化的展现方式既方便旅客及管理人员,又充分展示铁路信息化建设的成果。     

SS4B电力机车转向架可视化标准作业系统研究

SS_4B型电力机车转向架结构复杂,检修工序繁琐,对作业人员的检修技能培训要求高,针对目前培训方式存在的问题,提出建立转向架可视化标准作业系统,综合利用多媒体技术、数字化建模技术以及虚拟现实技术,构建集三维动画和人机交互功能于一体,信息集中化、培训作业标准化、培训时空自由化、周期短且考核针对性强的可视化培训系统,实现对SS_4B型电力机车转向架系统的内部结构、检修流程及其动态拆装过程的逼真模拟,提升实操培训效率和沉浸式体验,提高检修人员技能水平。     

轨道复合不平顺对无缝线路横向变形的影响分析

轨道复合不平顺会对行车的安全及稳定性产生较大影响,也是影响无缝线路横向变形的一个重要因素。为研究轨道复合不平顺对无缝线路的具体影响,通过构建三维轨道框架非线性有限元模型,采用轨道框架单点(或多点)位置发生横向及竖向位移来模拟复合不平顺状态,通过计算获取节点位移变化规律,进而分析轨道复合不平顺对无缝线路横向变形的影响作用。研究结果表明,轨道的复合不平顺会对无缝线路的横向变形产生显著的影响;当线路出现三角坑等类似病害时,其节点位移变化更为显著,在无缝线路的日常养护维修中应尤为注意。