九江长江公路大桥北塔下横梁施工方案研究

九江长江公路大桥主桥采用(70+75+84)m+818 m+(233.5+124.5)m双塔不对称混合梁斜拉桥,H形桥塔塔肢间设上、中、下3道横梁.为确定该桥北塔下横梁施工方案,对同步施工方案、异步施工方案、异步施工+主动横撑方案进行分析.结果表明:异步施工+主动横撑方案结构受力合理、施工工期短、施工风险小,确定为下横梁最终施工方案.经优化,主动横撑采用2根Φ1200 mm×12 mm的螺旋焊管制作,每根施加2000 kN 水平推力,在下横梁第一层混凝土强度达到90％之后,施加第一批横向预应力前撤掉水平推力;采取增加塔柱混凝土凿毛厚度、加强局部振捣的方法,保证新老混凝土结合面混凝土的施工质量.     

Fault-tolerant control of heavy-haul trains

The fault-tolerant control (FTC) of heavy-haul trains is discussed on the basis of the speed regulation proposed in previous works. The fault modes of trains are assumed and the corresponding fault detection and isolation (FDI) are studied. The FDI of sensor faults is based on a geometric approach for residual generators. The FDI of a braking system is based on the observation of the steady-state speed. From the difference of the steady-state speeds between the fault system and the faultless system, one can get fault information. Simulation tests were conducted on the suitability of the FDIs and the redesigned speed regulators. It is shown that the proposed FTC does not explicitly worsen the performance of the speed regulator in the case of a faultless system, while it obviously improves the performance of the speed regulator in the case of a faulty system.     

Optimisation of lateral car dynamics taking into account parameter uncertainties

Simulation studies on an active all-wheel-steering car show that disturbance of vehicle parameters have high influence on lateral car dynamics. This motivates the need of robust design against such parameter uncertainties. A specific parametrisation is established combining deterministic, velocity-dependent steering control parameters with partly uncertain, velocity-independent vehicle parameters for simultaneous use in a numerical optimisation process. Model-based objectives are formulated and summarised in a multi-objective optimisation problem where especially the lateral steady-state behaviour is improved by an adaption strategy based on measurable uncertainties. The normally distributed uncertainties are generated by optimal Latin hypercube sampling and a response surface based strategy helps to cut down time consuming model evaluations which offers the possibility to use a genetic optimisation algorithm. Optimisation results are discussed in different criterion spaces and the achieved improvements confirm the validity of the proposed procedure.     

城市高快速路先行建设智能交通系统之我见

分析了城市高快速路现状普遍存在的突出问题及城市高快速路建设智能交通系统的意义，从实际需求和将来发展预留空间出发，结合工作实践，提出了城市高快速路智能交通系统的系统定位和功能架构。     

HZQ40/120型运架一体架桥机的技术使用

对运架一体架桥机的结构特点及主要作业过程的技术使用进行了阐述,提出了维护保养要点,对架桥机的合理技术使用具有参考价值。     

采用井点钢护筒法综合处理钻孔桩断桩的探索

通过工程实例阐述了采用井点降水与钢护筒防护相结合处理钻孔桩断桩的方法,这种断桩处理方案大胆采用钢护筒防护和井点降低地下水位,结合人工下井凿除浮浆、清除泥污,且随灌注混凝土随提拔钢护筒,使桩混凝土仍与土壁接触,确保桩基混凝土与土壁的力学状态不变。其施工难度较大,具有一定的创新性,是一种较实用的工程断桩技术处理方案。     

大中型公路客车的设计特点分析

从安全性、舒适性、动力性和经济性、环保性等方面分析了目前大中型公路客车的设计特点,介绍与20世纪80-90年代的公路客车底盘在设计上的发展变化,并提出了一些设计中存在的问题及相关措施。     

自激多谐继电器稳定可靠性的提高措施

针对闪光器普遍存在闪频不稳的现象，分类叙述影响自激多谐继电器闪频的因素，并提出提高其稳定可靠性的具体措施。     

集群桩基大型承台承载性能模型试验研究

进行桩基承台设计的基本前提是明确承台的受力特点.为进一步研究大型桥梁工程中常见的大型集群桩基承台的受力机理和破坏模式,通过对两个比例为1:10的16桩厚承台模型试验和数据分析,揭示出多排多列桩情况下的厚承台受力特点和破坏模式,通过试验验证了16桩承台同样符合空间桁架模型的受力特点,承台底部钢筋尽量布置在桩顶范围内有利于提高承台的极限承载能力,为建立在复杂荷载作用下承台统一的内力计算方法提供试验依据.     

大口径长距离土压平衡式顶管施工技术

我国管道工程施工采用的顶管设备大多有三种类型：Ф1500mm以下用泥水平衡式顶管设备;Ф1500mm以上大多采用土压平衡式顶管设备;Ф2600mm至Ф3000mm为大口径顶管,在一般情况下,超过Ф3000mm应采用盾构机施工。该文以天津市某人防工程的顶管施工技术为例,指出：大口径长距离采用土压平衡式顶管施工,应保证提高整体施工效率,充分发挥设备技术潜能。