Mixed analysis of shell and solid elements using the overlaying mesh method

 This article presents a mixed method of analyzing shell elements and solid elements using the overlaying mesh method. In the structural design of a ship's hull, the shell elements are used for the global model. However, the solid elements are necessary to analyze the stress concentration zones or the vicinity of a crack. In such cases, the models are analyzed using zooming analysis, in which the results of a global model analysis are transferred to a local model analysis by imposing boundary conditions. This method is more advantageous than zooming analysis in terms of the accuracy of the solution and the modeling flexibility. Some examples of a plate model with a cracked surface or with a projection are shown in order to demonstrate the effectiveness of the method. Received: August 6, 2002 / Accepted: November 25, 2002 Address correspondence to: S. Nakasumi (sumi@nasl.t.u-tokyo.ac.jp) Updated from the Japanese original, which won the 2002 SNAJ prize (J Soc Nav Archit Jpn 2001;189:219–224; and 190:655–662)     

Numerical simulation of the flow about self-propelling tanker models

A time-marching CFD simulation is performed for self-propelling ships. The flow about the hull is simulated by the finite-volume method, and the propeller action is approximated as a propeller disk for which the solution is given by a simplified propeller model. The interaction of two flow models is treated in a time-marching procedure converging towards the steady self-propelling condition. This method is applied to five tanker models, and detailed comparisons are made between the simulated results and corresponding experimental results. It is shown that the flow field in the self-propelling condition is qualitatively well reproduced in the simulation, and the estimated thrust deduction factors for the five hull forms agree well with measured ones. However, the effective wake factors are underestimated, since the Reynolds number in the simulations differs from that in the experiment.     

模拟异种钢接头蠕变力学特性的数值分析

利用有限元数值模拟了高强匹配异种的接头在弹性－蠕变条件下的应力／应变场，结果表明，接头的应力／应变分布不均匀，在焊缝界面上，应力和应变分别呈不连续和不协调分布特性，并随着拦头各区蠕变强度差别的增大，其分布梯度增大，峰值应力／应变提高，因此，蠕变强度梯度大的高强焊缝和低强母材的界面是接头的薄弱部位。     

Dynamic Simulation of a Smart Crank and Slider Mechanism

In this paper, a smart crank and slider mechanism is analyzed mostly from a dynamic view. By means of dynamic explicit finite element method, 3D nonlinear structure is simulated. It is proved that the mechanism can effectively accomplish smart movement prescribed. And in order to ensure reciprocal movement with higher frequency, measures should be taken to avoid over heating of parts. Compared with internal energy, kinetic energy of total rigid body is dominating, and Y direction equivalent rigid velocity is much higher than X direction velocity. Equivalent rigid velocity of all parts is consistent with respective movement condition. For both energy and velocity, slider effect is dominating. Three direction equivalent inertia force oscillates. Force amplitude in Y -direction is comparitively the greatest.     

应用复合梁单元实现钢管混凝土拱桥的极限承载力分析

进行大跨度钢管混凝土拱桥的极限承载力分析,需要综合考虑几何和材料非线性、混凝土收缩和徐变、温度变化等多种因素的影响。本文从固体力学的基本理论出发,建立适于考虑上述诸多因素的复合梁单元,阐述了基于该单元的钢管混疑土拱桥极限承载力分析程序的实现方法,并通过与一个哑铃形截面钢管混凝土组合式拱肋极限承载力试验结果的对比验证了其可行性。     

船舶压载水不同处理方法的经济性分析

对船舶压载水不同处理方法所需费用和代价进行了简要评述。     

装配式公路钢桥承载力的有限元分析

指出装配式公路钢桥设计中所采用的简化计算方法的不足,使用大型有限元软件ANSYS对其受力情况和承载力进行了分析,并与简化计算方法作了对比,得出了一些规律性的结论,对实际应用具有指导意义。     

薄壁箱梁剪滞剪切效应自振特性分析

在推导考虑剪力滞、剪切变形双重效应的单元刚度矩阵与等效结点荷载矩阵的基础上[1],进一步推导出考虑双重效应的单元质量矩阵,从而形成完整的薄壁箱梁考虑双重效应的矩阵分析体系,可方便地纳入矩阵位移法程序系统,为常见的薄壁连续梁等复杂结构的剪力滞效应分析提供一种计算手段。利用自编程序ZLBOX对薄壁箱型简支梁和悬臂梁考虑剪力滞、剪切变形双重效应时的自振特性进行了分析,所得结果与ANSYS实体单元计算结果符合良好。计算结果表明,剪力滞、剪切变形双重效应使薄壁箱梁的自振频率降低,剪力滞效应占双重效应的85%以上,双重效应对高阶频率的影响比低阶频率的影响大。     

成昆线红层地区泥石流沟侵蚀程度量化分析

以成昆铁路红层地区的3个小流域为研究区,计算3个年份的地面割裂度及其年平均变化率,分析用地面割裂度表征泥石流沟侵蚀程度的不足及其原因。基于泥石流沟发育的物理模型,以原来的地面割裂度定义为基础,引入表述沟谷分布零散程度的异型度因子,导出新侵蚀系数公式。以3个小流域固体物质的年平均流失量作为侵蚀程度强弱的标准,采用非参数统计推断方法,将侵蚀系数、地面割裂度的年变化值和固体物质的年平均流失量作秩统计和次序统计。对秩统计参数和次序统计参数比较结果表明:在表征泥石流沟侵蚀程度方面,侵蚀系数优于地面割裂度。     

同步发电机参数辨识的相关方法探讨

随着电网安全及稳定运行问题的重要性日益突出,基于获得准确的系统模型和参数辨识方法,优化同步发电机相关参数将是十分有意义的。本文针对当今几种比较典型的参数辨识方法做了系统的介绍,通过比较得出何种方法对于同步电机的参数辨识是最适合的。