公路桥梁维修加固技术经济评价方法研究

在桥梁维修加固实施过程中,不可避免的涉及到其经济合理性问题,目前还未有较为成熟和系统的方法,对桥梁维修加固的经济合理性进行评价。本文结合桥梁维修加固涉及到的宏观和微观方面,提出了一种新的评价方法,用以判断桥梁维修加固的经济合理性。     

应用线弹性疲劳损伤理论的沥青路面轴载换算

应用疲劳损伤力学基本原理,探讨了适用于沥青路面轴载换算的新方法,并对该方法拟合的公式与规范按弯沉等效推荐的当量轴载换算公式进行了比较。计算结果表明在进行沥青路面轴载换算时,采用不同的等效换算原理,将导致非标准轴载与标准轴载当量换算系数上的不同,前者较后者大。这种差异一方面直接影响沥青路面的结构厚度设计,对设计年限内累计当量标准轴载作用次数的低估,必然导致沥青路面早期破损现象的发生;另一方面揭示弯沉等效表征的是路面结构的瞬间刚度性质,代替不了路面结构的长期疲劳强度特性。     

赣江大桥公路桥病害检测与安全评估

首先对赣江大桥公路桥进行病害调查,评定全桥各部位损伤状态。根据评定结果,再对材料退化、结构损伤与受力性能进行实桥测试。应用断裂力学方法,采用观测和超声波探测方法确定初始裂纹尺寸,通过裂纹扩展模拟得出临界杆件的剩余寿命。综合实测数据与理论分析,评估该桥使用安全性和剩余寿命,并建议维护加固措施。     

基于WebGIS车辆定位系统的设计

探讨了如何利用WebGIS技术实现在Internet环境下车辆定位中的应用,包括系统的组成、工作原理、短消息和WebGIS架构等内容,该设计方法是在微软最新的开发环境.Net和Mapinfo公司的MapX控件基础上开发实现的,详细解释了WebGIS架构和介绍了车辆定位系统的主要功能。系统的实现使用户可以直接在Internet环境下完成查询指定车辆的位置等相关信息,为智能交通的实现奠定了基础。     

半刚性基层材料路用性能的试验研究

通过室内试验,研究了3种半刚性基层材料(水泥碎石、水泥粉煤灰稳定碎石、二灰碎石)的强度特性、断裂韧度、干缩特性及疲劳性能,比较了它们的路用性能。试验结果表明:半刚性基层材料的断裂韧度与弯拉强度具有一定的相关性;二灰碎石与水泥类稳定碎石相比,强度和断裂韧度较低,干缩性能和疲劳性能较好;水泥类稳定碎石抗弯拉强度比二灰碎石高,可弥补其疲劳寿命衰减过快的不足;用粉煤灰代替部分水泥,有广泛的工程应用前景。     

A regression and beam theory based approach for fatigue assessment of containership structures including bending and torsion contributions

Container shipping has been expanding dramatically during the last decade. Due to their special structural characteristics, such as the wide breadth and large hatch openings, horizontal bending and torsion play an important role to the fatigue safety of containerships. In this study the fatigue contributions from vertical bending, horizontal bending and torsion are investigated using full-scale measurements of strain records on two containerships. Further, these contributions are compared to results from direct calculations where a nonlinear 3D panel method is used to compute wave loads in time domain. It is concluded that both bending and torsion have significant impacts on the fatigue assessment of containerships. The stresses caused by these loads could be correctly computed by full-ship finite element analysis. However, this requires large computational effort, since for fatigue assessment purposes the FE analysis needs to be carried out for all encountered sea states and operational conditions with sufficient time steps for each condition. In this paper, a new procedure is proposed to run the structure finite element analysis under only one sea condition for only a few time steps. Then, these results are used to obtain a relationship between wave loads and structural stresses through a linear regression analysis. This relation can be further used to compute stresses for arbitrary sea states and operational conditions using the computed wave loads (bending and torsion moments) as input. Based on this proposed method for structure stress analysis, an efficient procedure is formulated and found to be in very good agreement with the full-ship finite element analysis. In addition it is several orders of magnitude more time efficient for fatigue assessment of containership structures.     

基于多旅行商问题的应急设施服务区划分模型

基于多旅行商问题，增设集散中心需求及应急服务设施资源容量约束条件，以最小化遍历区域内全部集散中心的综合旅行时间成本为优化目标，构建一种应急设施服务区划分模型，确定各应急设施的服务区范围.设计一种复合算法求解模型，首先基于P-中值选址模型的优化理念，形成初始方案；继而加入禁忌搜索算法，结合LKH求解器对模型进行迭代优化求得最优解.基于宁波市北仑区实际拓扑网络进行案例分析，验证了模型和求解方法的有效性.     

Towards a model of hydrodynamic damping for a circular cylinder with helical strakes at low KC

This paper investigates the hydrodynamic damping of a circular cylinder with helical strakes at Keulegan-Carpenter (KC) number from 0.07 to 3 in the presence of steady currents. Experiments were performed with a straked cylinder oscillating in either in-line or cross currents over Reynolds number (based on the oscillating velocity amplitude) varying from 1260 to 54,000. With in-line current being present, the measured drag coefficients of the straked cylinder are found to depend on the ratio between the oscillating velocity amplitude and the steady current velocity. This phenomenon is further confirmed by computational fluid dynamics using large-eddy simulations. The drag coefficients obtained from the numerical simulations agree well with the experimentally determined values. Similar phenomenon is observed for the cases with cross background current. Based on the experimental data, empirical formulae are proposed to evaluate drag coefficients. These results are of importance in estimating the resonant motion and the fatigue life of risers, e.g. water intake risers, in the flow regime of low KC. Finally, recommendations are provided for fatigue analysis of risers with helical strakes from the perspective of engineering practice.     

Locating emergency vehicles with an approximate queuing model and a meta-heuristic solution approach

In this paper, the location of emergency service (ES) vehicles is studied on fully connected networks. Queuing theory is utilized to obtain the performance metrics of the system. An approximate queuing model the (AQM) is proposed. For the AQM, different service rate formulations are constructed. These formulations are tested with a simulation study for different approximation levels. A mathematical model is proposed to minimize the mean response time of ES systems based on AQM. In the model, multiple vehicles are allowed at a single location. The objective function of the model has no closed form expression. A genetic algorithm is constructed to solve the model. With the help of the genetic algorithm, the effect of assigning multiple vehicles on the mean response time is reported.     

放宽条件定点集结模式下编组站车辆 集结排队系统分析

集结模式决定了货车集结过程的结束条件，定点集结是一种高效率的集结方式，有利于提高运输质量.针对放宽条件定点集结模式下编组站车辆集结过程，建立离散时间批到达批服务排队模型，利用嵌入式马尔可夫链方法求得离去时刻瞬时系统集结车辆队长分布，并求得任意时刻车辆集结队长分布，在此基础上分别分析了最小编成辆数，车组大小分布，车流到达强度，服务时间间隔分布对车辆平均集结队长，集结延误时间，效率，一昼夜发送车流量等系统指标的影响.分析结果表明，各因素对车辆集结排队系统影响明显.因此，利用本文提出的模型能为编组站的精细化管理和车流组织优化提供决策参考.