基于Midas Civil的简易车桥耦合振动分析

文章以某40m预应力混凝土简支T梁为例,利用单轴车桥耦合振动数值模型及基于MidasCivil的简易车桥耦合振动模型对移动车辆荷载作用下的T梁结构动力响应情况进行计算分析。结果表明,基于MidasCivil的简易车桥耦合振动模型与数值模型的结构挠度峰值计算结果相差不大,可用于简单的车桥耦合振动分析。     

特大桥施工测量精度浅析

文章以兰渝铁路嘉陵江双线特大桥为工程背景,在介绍施工测量平面控制网的基础上,阐述了桥梁施工测量放样的精度要求及具体控制措施,分析了测量误差产生的原因,并提出了相应的测量精度评定方法。     

大型地下空间的结构分割转换工法研究

为解决当下地下空间开发难题,依托中铁工程装备集团地下停车场项目,提出建造大型地下空间的结构分割转换工法（CC工法）,并成功应用。文章从传统各工法的特点出发,阐述CC工法的设想。基于工程实践过程,首先,从地下结构的分割与转换2个角度,重点介绍大型地下空间的形成过程、型钢和钢筋混凝土组合结构管节、节点处理措施等创新内容; 然后,针对B类节点的处理措施、整体背土现象等工程问题进行解决与优化; 最后,探讨该工法拓展应用的可能性,分别介绍多层、曲线、长距离、装配式结构大型地下空间的初步方案。CC工法的成功研发,旨在为城市大型地下空间开发提供一套新的解决思路。     

隧道围岩体内位移监测分析

隧道围岩体内位移监测结论对于判断围岩稳定性和保证施工安全与工程质量起着重要的作用。文章以一高速公路隧道为依托,介绍了围岩体内位移测量设备和工作原理,并通过对其围岩体内位移检测数据的分析,提出了隧道围岩体内位移监测的注意事项。     

百色-罗村口高速公路百康村滑坡稳定性分析

文章结合百色-罗村口高速公路百康村滑坡区的工程地质概况,分析了百康村滑坡的形成机理,并采用传递系数法对滑坡的稳定性进行了探讨,提出了相应的综合处治方案。     

水下采油树树本体的加工工艺研究

根据中国南海某油气田开发项目的工况环境及应用要求,对某型卧式水下采油树关键部件——树本体制造过程中的主要技术难点进行了阐述和分析,并针对性地提出了解决措施。在此基础上,通过自主研发完成国产化试制,并按相关标准进行性能及功能测试,试验结果表明,工艺质量完全满足设计性能及功能要求。     

AZS(M)350U型安全信息传输系统故障分析

简要介绍AZS(M)350U型安全信息传输系统构成,结合现场运用情况,通过案例介绍故障处理方法。     

浅谈高速公路桥头跳车的因素及预防措施

桥头跳车一直是高速公路投入使用后普遍存在的问题,本文通过查阅各种资料及本人施工经验,归纳总结了桥头跳车问题产生的原因,提出了桥头跳车问题的预防措施,以便为今后类似工程的施工提供参考。     

喀斯特灌木护坡技术绿化法在石质坡面的应用

岩石边坡绿化是一门新兴的边缘学科，涉及面广。喀斯特（KST）灌木护坡技术绿化法在贵州高速公路运用尚属首次。鉴于此，结合都新高速公路边坡施工的喀斯特（KST）灌木护坡技术绿化，介绍了该方法的技术方案、护坡原理、施工中的消耗量和施工工艺。     

A stochastic optimization approach for the selection of reflective cracking mitigation techniques

PurposeIn Hot Mix Asphalt (HMA) overlays, the existing cracks in the underlying pavements can propagate upward to the new added overlay and may cause Reflective Cracks (RC). These cracks allow water infiltration to the underlying layers and causes further moisture damage as well as weakening the unbound layers. Over the years, several methods have been developed for mitigating the RCs. This study aims to investigate the current reflective cracking mitigation methods and develop a methodology for the selection of appropriate mitigation technique. The developed model is then applied to a case study in the state of Florida.MethodTo accomplish this goal, a nationwide literature review was conducted to better understand the current in practice methods in the United States. Moreover, a life cycle cost analysis (LCCA) in five different road types was performed to find the annuity of roadway rehabilitation for each of the mitigation methods. The uncertainty in the LCCA results is represented using Exploratory Modeling and Analysis (EMA) method. Then through a Multi Criteria Decision Making (MCDM) model, a stochastic optimization model was developed to find the appropriate reflective cracking mitigation solution under Florida’s climate and road conditions, based on different cost and performance weights.ResultsBased on the available data for the state of Florida, the LCCA results indicate that the annuity of maintaining the roadway with Fabrics and ISAC are lower compared to other methods. However, the results of stochastic optimization model reveal that while looking at the performance and cost at the same time, different methods would be more feasible. For instance, while the cost of the used method does not matter at all and only performance matters, STRATA® is more probable to be the appropriate mitigation technique. The findings of this research are critical for decision makers to better understand the most cost-effective mitigation technique in different conditions.