公路建设项目征地拆迁补偿费用确定与控制方法研究

文中以广东省公路建设项目征地拆迁费用的确定为例,以现行实施的征地拆迁补偿相关规定为基础,探讨征地数量和标准的计量、计算方法,建立征地拆迁标准动态数据库,以期对征地拆迁费用的确定和控制提供思路和实际操作指导。     

车辆隔热壁K值计算中空气层的处理方法

对轨道交通车辆多层复合结构的隔热壁进行隔热性能理论计算与仿真计算的对比,对隔热壁内部空气层的隔热性能进行分析。结论为:在车辆多层复合结构的隔热壁K值计算中,当空气层厚度大于一定厚度时,流体自然对流对隔热壁的隔热性能影响较大。利用多项式密度(Polynomial Denisity)和Boussinesq模型两种算法,对所得结论进行了验证。     

Investigation of tailpipe and evaporative emissions from China IV and Tier 2 passenger vehicles with different gasolines

The limited understanding of vehicular emissions in China, especially evaporative emissions, is one obstacle to establishing tighter standards. To evaluate tailpipe and evaporative emissions, two typical China IV vehicles and one Tier 2 vehicle with an onboard refuelling vapour recovery (ORVR) system were selected and tested. One of the China IV vehicles was fuelled with gasoline, E10 and M15, respectively, to investigate the effect of fuel properties on vehicular emissions. For each vehicle, cold-start tailpipe emission tests were conducted first, followed by an evaporation test. Based on the emission factors and real-world vehicle activity data, the annual tailpipe and evaporative hydrocarbon (HC) emissions of each vehicle were calculated and compared. The results show that E10 and M15 significantly reduced the tailpipe CO and particle number (PN) emissions but seriously aggravated the NOx emissions, especially for M15. The hot soak losses (HSLs) and diurnal breathing losses (DBLs) were slightly impacted by the fuel properties. The annual evaporative emissions with E10 and M15 were higher than that with gasoline. The ORVR system effectively controlled the evaporative emissions, especially for DBLs. Evaporative emissions from the China IV vehicles were 1.1–1.4 times the tailpipe HC emissions. Additionally, the evaporative emission factors of the China IV vehicles were almost 50% lower than the standard (2.0 g/test), whereas their annual evaporative emissions were almost 1.8–2.8 times higher than those from the Tier 2 vehicle. Therefore, controlling evaporative emissions currently remains a great need in China, and the ORVR might be a recommended evaporative control technology.     

Free-floating bike sharing: Solving real-life large-scale static rebalancing problems

Free-floating bike sharing (FFBS) is an innovative bike sharing model. FFBS saves on start-up cost, in comparison to station-based bike sharing (SBBS), by avoiding construction of expensive docking stations and kiosk machines. FFBS prevents bike theft and offers significant opportunities for smart management by tracking bikes in real-time with built-in GPS. However, like SBBS, the success of FFBS depends on the efficiency of its rebalancing operations to serve the maximal demand as possible.Bicycle rebalancing refers to the reestablishment of the number of bikes at sites to desired quantities by using a fleet of vehicles transporting the bicycles. Static rebalancing for SBBS is a challenging combinatorial optimization problem. FFBS takes it a step further, with an increase in the scale of the problem. This article is the first effort in a series of studies of FFBS planning and management, tackling static rebalancing with single and multiple vehicles. We present a Novel Mixed Integer Linear Program for solving the Static Complete Rebalancing Problem. The proposed formulation, can not only handle single as well as multiple vehicles, but also allows for multiple visits to a node by the same vehicle. We present a hybrid nested large neighborhood search with variable neighborhood descent algorithm, which is both effective and efficient in solving static complete rebalancing problems for large-scale bike sharing programs.Computational experiments were carried out on the 1 Commodity Pickup and Delivery Traveling Salesman Problem (1-PDTSP) instances used previously in the literature and on three new sets of instances, two (one real-life and one general) based on Share-A-Bull Bikes (SABB) FFBS program recently launched at the Tampa campus of University of South Florida and the other based on Divvy SBBS in Chicago. Computational experiments on the 1-PDTSP instances demonstrate that the proposed algorithm outperforms a tabu search algorithm and is highly competitive with exact algorithms previously reported in the literature for solving static rebalancing problems in SBSS. Computational experiments on the SABB and Divvy instances, demonstrate that the proposed algorithm is able to deal with the increase in scale of the static rebalancing problem pertaining to both FFBS and SBBS, while deriving high-quality solutions in a reasonable amount of CPU time.     

An improved cellular automaton with axis information for microscopic traffic simulation

Cellular Automaton (CA), an efficient dynamic modeling method that is widely used in traffic engineering, is newly introduced for traffic load modeling. This modeling method significantly addresses the modest traffic loads for long-span bridges. It does, however, require improvement to calculate precise load effects. This paper proposed an improved cellular automaton with axis information, defined as the Multi-axle Single-cell Cellular Automaton (MSCA), for the precise micro-simulation of random traffic loads on bridges. Four main ingredients of lattice, cells’ states, neighborhoods and transition rules are redefined in MSCA to generate microscopic vehicle sequences with detailed vehicle axle positions, user-defined cell sizes and time steps. The simulation methodology of MSCA is then proposed. Finally, MSCA is carefully calibrated and validated using site-specific WIM data. The results indicate: (1) the relative errors (REs) for the traffic parameters, such as volumes, speeds, weights, and headways, from MSCA are basically no more than ±10% of those of WIM data; (2) the load effects of three typical influence lines (ILs) with varied lengths of 50, 200 and 1000 m are also confidently comparable, both of which validate the rationality and precision of MSCA. Furthermore, the accurate vehicle parameters and gaps generated from MSCA can be applied not only for precise traffic loading on infrastructures but also for the accurate estimation of vehicle dynamics and safety. Hence, wide application of MSCA can potentially be expected.     

可持续交通——各方观点和长期挑战

从交通研究者和实践者的角度出发,以可持续交通这一概念为中心展开讨论。可持续交通宽泛地反映了可持续发展在交通领域的原则。随着可持续性这一概念的外延逐渐扩大,在它的定义、应用和价值取向上出现了不同观点。着重讨论可持续交通,以及如何理解和运用可持续交通,包括:1)将可持续性或者可持续发展作为一个整体的概念,包括关于可持续性的不同方法和定义之间的冲突;2)对可持续交通以及交通领域对其理解的探索;3)使用指标来实现可持续性的应用。然后识别了通往可持续交通之路的若干挑战,包括缺乏清晰定义、可持续性的固有冲突、可持续发展的跨领域本质、各种工作框架和指标体系、可持续发展的政治因素和交通领域实践中的不同观点。基于在该课题上的研究积累,总结解决这些问题的工作框架,提出因地制宜、注重结果、整体的方法来解决可持续交通中的挑战。     

基于计算机自动控制技术的多探头测深系统研制与改造

通过加装控制盒的方式,实现单探头测深仪与自动控制探头之间的流畅切换,将传统单探头测深仪改造成具有多探头功能的高效水下测量仪器系统,主要用于航道和码头基床等的水下扫测。利用该系统进行的码头基床扫测已经取得成功,可为同类测量设备的改造提供全新的思路。     

论孔子人才观的历史定位与普适价值

孔子的人才观虽然产生于春秋时期动荡的社会背景下,却揭示了人才的最本质内涵———＂仁、智、勇＂。三者作为人才内涵的核心三要素,形成一个内在的三角稳定结构,它能够持久地推动包括成才在内的人的生命境界的发展,因而具有超越时代和社会阶层的普适价值。     

Estimating traffic volumes for signalized intersections using connected vehicle data

Recently connected vehicle (CV) technology has received significant attention thanks to active pilot deployments supported by the US Department of Transportation (USDOT). At signalized intersections, CVs may serve as mobile sensors, providing opportunities of reducing dependencies on conventional vehicle detectors for signal operation. However, most of the existing studies mainly focus on scenarios that penetration rates of CVs reach certain level, e.g., 25%, which may not be feasible in the near future. How to utilize data from a small number of CVs to improve traffic signal operation remains an open question. In this work, we develop an approach to estimate traffic volume, a key input to many signal optimization algorithms, using GPS trajectory data from CV or navigation devices under low market penetration rates. To estimate traffic volumes, we model vehicle arrivals at signalized intersections as a time-dependent Poisson process, which can account for signal coordination. The estimation problem is formulated as a maximum likelihood problem given multiple observed trajectories from CVs approaching to the intersection. An expectation maximization (EM) procedure is derived to solve the estimation problem. Two case studies were conducted to validate our estimation algorithm. One uses the CV data from the Safety Pilot Model Deployment (SPMD) project, in which around 2800 CVs were deployed in the City of Ann Arbor, MI. The other uses vehicle trajectory data from users of a commercial navigation service in China. Mean absolute percentage error (MAPE) of the estimation is found to be 9–12%, based on benchmark data manually collected and data from loop detectors. Considering the existing scale of CV deployments, the proposed approach could be of significant help to traffic management agencies for evaluating and operating traffic signals, paving the way of using CVs for detector-free signal operation in the future.     

Adoption of alternative fuel vehicles: Influence from neighbors,family and coworkers

During the last years, many governments have set targets for increasing the share of biofuels in the transportation sector. Understanding consumer behavior is essential in designing policies that efficiently increase the uptake of cleaner technologies. In this paper we analyze adopters and non-adopters of alternative fuel vehicles (AFVs). We use diffusion of innovation theory and the established notion that the social system and interpersonal influence play important roles in adoption. Based on a nationwide database of car owners we analyze interpersonal influence on adoption from three social domains: neighbors, family and coworkers. The results point primarily at a neighbor effect in that AFV adoption is more likely if neighbors also have adopted. The results also point at significant effects of interpersonal influence from coworkers and family members but these effects weaken or disappear when income, education level, marriage, age, gender and green party votes are controlled for. The results extend the diffusion of innovation and AFV literature with empirical support for interpersonal influence based on objective data where response bias is not a factor. Implications for further research, environmental and transport policy, and practitioners are discussed.