浙江LNG码头总平面布置试验研究

浙江LNG码头是我国目前最大的LNG码头之一,所处环境相对复杂,在项目设计过程中,为确定合理的码头总 平面布置方案、保证船舶安全系靠泊,采用了物理模型试验的方法,对3个不同的平面布置方案进行了比较,通过试验得出 不同方案下的船舶运动量及系缆力等参数,通过分析试验结果最终明确了合理的总平面布置方案。     

Hilbert-Huang变换在声振信号检测钢管混凝土脱空中的应用

提出了基于Hilbert-Huang变换的钢管混凝土脱空检测方法,通过对瞬态冲击下脱空钢管的声振信号进行分析,提取出了瞬时幅值特征样本,采用改进的K均值聚类法对特征样本进行二类模式识别,从而对钢管混凝土的脱空进行判定,试验研究表明本方法的可行性。     

磁流变减振器结构设计与试验研究

针对设计制造的基于混合工作模式的单级磁路与双级磁路磁流变减振器,在伺服试验台上对所设计制造的减振器进行了试验研究。分析了两种结构的磁流变减振器在不同激励电流的作用下示功特性曲线的特点及速度特性曲线特点。试验表明:双级磁路活塞减振器阻尼力变化范围更大,比同样结构的单级磁路活塞减振器性能更为优越,为磁流变减振器的进一步优化设计提供了依据。     

低速电动汽车NVH性能测试与分析

在整车开发环节中,需要保证车辆具有良好的NVH性能。针对某电动汽车样车的振动噪声问题,对车内噪声水平及电机、减速器、差速器等声振特性进行测试;采用阶次跟踪分析法识别出车内主要的振动噪声源;提出了相应的减振降噪措施。     

锚固体的布设位置与形态对固坡效果的影响

为揭示灌浆锚固体对固坡效果的影响规律,利用有限元强度折减法,计算了单根锚固体分别在垂直或水平布设于坡体不同位置条件下以及布设角度不同等条件下锚固体的变形和边坡的稳定系数。分析表明:在坡体中置入锚固体对边坡的稳定性均有不同程度的提高,其中垂直布设较水平布设的固坡效果更为显著;布设位置在坡高约1/3处最为理想;锚固体与坡面夹角也对固坡效果有较大的影响。     

Dynamic hardening behaviors of various marine structural steels considering dependencies on strain rate and temperature

This paper presents a new formula for prediction of the dynamic hardening effect for various marine structural steels, considering dependencies on the strain rates and temperatures. Dynamic tensile tests are carried out for three kinds of marine steels, 2W50, EH36, and DH36, changing the steel layer in the thickness direction, the strain rates, and temperatures. Considering two thickness layers at the middle and surface, five strain rate levels of 0.001/s, 1/s, 10/s, 100/s, and 200/s, three temperature levels of LT (−40 °C), RT, and HT (200 °C), and two repetitions, the total number of tests is 180. Dynamic hardening is clearly seen at LT and RT regardless of the material type, while dynamic strain aging occurs at HT, leads to negative strain rate sensitivity, and thus elevates the quasi-static flow stress above the dynamic flow stress to a certain strain rate. Dynamic hardening factors (DHFs) are derived as a function of the proof strains of 0.05, 0.10, and 0.15 according to each material type and temperature level. A new formula to determine the material constant D of Cowper–Symonds constitutive equation is developed. The correctness of the proposed formula is verified through comparison with test flow stress curves and reference test data in large plastic strain and high strain rate ranges.     

Are Longer and Heavier Vehicles (LHVs) Beneficial for Society? A Cost Benefit Analysis to Evaluate their Potential Implementation in Spain

Abstract

In this paper we carry out a thorough review of the current research related to the benefits and costs arising from the implementation of longer and heavier vehicles (LHVs). From this review we concluded that despite the many studies available, little has been said about the sensitivity of the benefits and costs to the ultimate performance of the key variables related to the evolution of the economy, road transport performance, safety, and so on. In order to fill this gap, we have designed a sensitivity approach based on a cost benefit analysis tool to determine which variables demonstrate the greatest influence on the benefits and costs stemming from the implementation of LHVs. In order to test the methodology, we have used it in an analysis of the Spanish trunk network. The results show that the benefits of LHVs for society are significant. Even in the least favorable scenario, the economic benefits are greater than €3500 million over 15 years, and the environment enhanced as well, for CO₂ emissions are reduced by 2 Million tonnes. Overall we noted how the results are not very sensitive to the evolution of key variables in determining the final outcome. However, we found that the variables that have the greatest affect on the final benefit, such as traffic growth and social discount rate, depend basically on the performance of the overall economy. Moreover, the private cost for haulers seems to be more important in determining the final benefit than externality costs.     

基于响应面法的双前桥转向机构参数优化

针对某重型双前桥转向汽车轮胎磨损严重的问题,运用Adams/View建立了该型汽车双前桥转向机构的运动学模型,对其进行了运动学及转向性能仿真分析。针对第二桥车轮实际转角与理想转角之间差异较大的问题,采用灵敏度分析的方法,找出对转角差异影响较大的因子,在Adams/Insight中,使用响应面分析方法,对双前桥转向机构的参数进行了优化。对比优化前后的转角差异可知,实际转角与理想转角之间的差异得到了有效控制,从而降低了轮胎的磨损。     

基于ST-MRF的自适应车辆跟踪算法研究

可靠的车辆跟踪是实现交通事件自动检测的重要前提,车辆跟踪中的车辆相互遮挡则是影响车辆跟踪结果的关键因素.为了解决这一难题,文中提出一种基于ST-MRF模型的自适应车辆跟踪算法.在ST-MRF模型中,把图像分成块,将相邻图像间的块通过它们的矢量联系起来,建立运动序列图像的时空马尔可夫随机场模型并且构造其相应的能量耗费函数,然后利用松弛算法实现目标地图最小化能量计算,从而解决车辆跟踪中的遮挡问题.实验结果表明,跟踪不遮挡的车辆时达到的跟踪成功率为95%,遮挡情况时成功率也可达到91%.通过实验得出以下结论:基于ST-MRF模型的自适应车辆跟踪算法能在交通量比较大,且车辆出现相互遮挡的情况下,能较准确地获得车辆跟踪数据.为以后的交通事件检测提供重要的数据基础.     

����������ҵ����Ͻ�ͨ�����յ��Ż�ģ�ͼ������

随着城市中心商业区的快速发展,其造成的城市交通拥堵已经成为影响居民出行和城市发展的严重障碍.本文以城市中心商业区的混合交通流为研究对象,建立了基于动态分配的交通流诱导优化模型.首先,基于总体费用函数的路径选择概率对城市中心商业区的交通流进行动态交通分配.然后,根据分配结果确定拥堵路段,据此给出不同交通诱导措施,再应用所建模型选择最佳方案.最后,采用VISSIM交通仿真软件,对天津市滨江道商业区的混合交通流进行动态仿真,并针对不同的交通诱导措施,应用所建模型对诱导方案进行仿真和评价,确定最优方案,从而有效地减少交通拥堵.