刚柔耦合多体车辆操纵稳定性研究

利用多体动力学方法建立了基于ADAMS软件平台的整车刚柔耦合多体系统操纵动力学仿真分析模型。并分别对多刚体模型和刚柔耦合多体模型进行了“转向盘脉冲输入”、“ISO移线”仿真，分析了构件的柔性对汽车操纵稳定性的评价指标值的影响。     

四轮驱动ABS控制方法的分析

以四轮驱动汽车为研究对象,分析了其在差速器锁止时制动防抱死控制过程所出现的问题,归纳总结了四轮驱动ABS控制技术的特点及对制动安全性的影响。     

Bosch VDC系统的控制原理及展望

VDC系统(Vehicle Dynamics Control、车辆动力学控制系统，在美日等国称为VDC，而在欧洲称为ESP，Electronic Stability Program，即电子稳定程序)是Bosch公司1995年推出的用于改善车辆操纵稳定性的一种车辆动力学控制系统。VDC系统包括两个控制回路：控制车辆运动的主控制回路，控制制动和驱动滑移的副控制回路。文中详细介绍了这两个回路的工作原理，并给出了改善车辆操纵稳定性的实例。最后，指出了VDC系统的发展趋势。     

一种确定高圆簧横向刚度的有效方法

文中将高圆簧简化为等截面弹性直杆，导出高圆簧横向刚度计算式，并用试验结果进行修正，提出高圆横向刚度分析方法。理论分析和试验结果表明：高圆簧横向刚度的大小取愉于高圆簧的自由高度和工作高度，即由其结构几何参数和工作载荷决定。按文中方法确定的高圆簧横向刚度理论值与试验结果间的最大误差不超过１０％，满足工程理论分析要求。     

Comparing different contour methods with response-based methods for extreme ship response analysis

Environmental contours are often applied in probabilistic structural reliability analysis to identify extreme environmental conditions that may give rise to extreme loads and responses. They facilitate approximate long term analysis of critical structural responses in situations where computationally heavy and time-consuming response calculations makes full long-term analysis infeasible. The environmental contour method identifies extreme environmental conditions that are expected to give rise to extreme structural response of marine structures. The extreme responses can then be estimated by performing response calculations for environmental conditions along the contours.Response-based analysis is an alternative, where extreme value analysis is performed on the actual response rather than on the environmental conditions. For complex structures, this is often not practical due to computationally heavy response calculations. However, by establishing statistical emulators of the response, using machine learning techniques, one may obtain long time-series of the structural response and use this to estimate extreme responses.In this paper, various contour methods will be compared to response-based estimation of extreme vertical bending moment for a tanker. A response emulator based on Gaussian processes regression with adaptive sampling has been established based on response calculations from a hydrodynamic model. Long time-series of sea-state parameters such as significant wave height and wave period are used to construct N-year environmental contours and the extreme N-year response is estimated from numerical calculations for identified sea states. At the same time, the response emulator is applied on the time series to provide long time-series of structural response, in this case vertical bending moment of a tanker. Extreme value analysis is then performed directly on the responses to estimate the N-year extreme response. The results from either method will then be compared, and it is possible to evaluate the accuracy of the environmental contour method in estimating the response. Moreover, different contour methods will be compared.     

Optimal placement of omnidirectional sensors in a transportation network for effective emergency response and crash characterization

Rapid motor vehicle crash detection and characterization is possible through the use of Intelligent Transportation Systems (ITS) and sensors are an integral part of any ITS system. The major focus of this paper is on developing optimal placement of accident detecting omnidirectional sensors to maximize incident detection capabilities and provide ample opportunities for data fusion and crash characterization. Both omnidirectional sensors (placed in suitable infrastructure locations) and mobile sensors are part of our analysis. The surrogates used are acoustic sensors (omnidirectional) and Advanced Automated Crash Notification (AACN) sensors (mobile). This data fusion rich placement is achieved through a hybrid optimization model comprising of an explicit–implicit coverage model followed by an evaluation and local search optimization using simulation. The compound explicit–implicit model delivers good initial solutions and improves the detection and data fusion capabilities compared to the explicit model alone. The results of the studies conducted quantify the use of a data fusion capable environment in crash detection scenarios, and the simulation tool developed helps a decision maker evaluate sensor placement strategy.     

松花江大桥异形双壁钢围堰的构造与分析

介绍了松花江大桥35#墩异形双壁钢围堰的构造,并用ANSYS对其结构进行了分析,得出了该结构的应力和位移分布,依据分析结果,优化了原设计尺寸,对提高产品的强度、刚度及安全性能具有一定的指导意义。     

对于渔船避让的几点见解

阐述了大连——日本航线上经常遇到的渔船种类及作业特点,总结出针对不同种类的渔船在捕捞过程中应采取的必要措施,为以后在该航线上行驶的远洋船舶驾驶人员提供经验借鉴。     

中英思维模式差异对英汉学术论文写作的影响

探讨了中英语篇思维模式差异对英汉学术论文写作中论证方法的影响问题.文章通过分析指出,中英思维模式存在着直觉与抽象、本体与客体和螺旋与直线型差异,并因此导致英汉学术论文中论证方法在修辞手段、引经据典、引用权威等方面的使用差异.文章最后指出,只有了解英汉思维模式的差异,分析其文化成因,才能真正实现跨文化写作的成功.     

渤海湾13000t级大型客滚船首部砰击安全性探讨

在对渤海湾13000t级大型客滚船的船型设计特征进行分析的基础上,运用船模砰击压力测试结果,得出砰击发生在首部舷侧区域的结论。最后采用实船统计衡准评估和砰击强度分析评估2种方法对首部砰击的安全性进行了探讨。