Soil Body Deformation Caused by Construction of a Double-Line Shield Tunnel with Multiple Factors北大核心CSCD

Considering the influence of many factors (soil loss, frontal additional thrust, the friction force of the shield shell and the additional grouting force), a method for improving the uniform soil body movement model is pro-posed, and a mechanical calculation model is established to study the calculation method for soil body deformation caused by double-line parallel shield driving. Based on the Mindlin solutions of elastic mechanics, the theoretical solutions for soil body deformations caused by the last three factors are calculated; considering the uniform soil body movement model, the theoretical solutions for soil body deformations caused by soil loss are calculated, then the to-tal theoretical solutions for soil body deformations under multiple factors are obtained by means of superposition. The vertical surface settlement, vertical horizontal displacement, and vertical displacements of the soil body at different depths of Hangzhou Metro Line 1 are calculated to analyze the variation laws. Meanwhile the influential factors for horizontal displacement variation are studied. The research shows that with a change of depth, the settlement of the soil body changes within the scope of 10 to 13 m in the horizontal direction near where the maximum settlement occurs;the direction of the horizontal displacement of the soil body changes with a change of the positional relationship be-tween the calculation points and the tunnel; and with an increase of interval J for the two tunnels, the horizontal dis-placement of the soil body of a deep double-line tunnel decreases while the displacement near the surface changes slightly. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

富水砂质地层的地铁区间隧道设计

深圳地铁2号线东延段安托山站—侨香站区间隧道顺利通过富水砂质地层的工程实例表明,在复杂地层中采用地面降水、超前预注浆及水平旋喷桩加固等辅助措施是成功的,也是必要的;另外,在隧道下穿次高压燃气管施工中,采用悬吊保护措施也为矿山法隧道施工和管线的绝对安全带来了技术保障。     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。     

隧道围岩体内位移监测分析

隧道围岩体内位移监测结论对于判断围岩稳定性和保证施工安全与工程质量起着重要的作用。文章以一高速公路隧道为依托,介绍了围岩体内位移测量设备和工作原理,并通过对其围岩体内位移检测数据的分析,提出了隧道围岩体内位移监测的注意事项。     

采用X形桩的遮帘式板桩码头结构静力分析

X形桩是一种反拱曲面异型桩,相比于同等截面积的矩形桩和圆形桩,X形桩具有更大的截面周长和惯性矩,受力性能更好。结合京唐港32#泊位遮帘式板桩码头结构,以X形桩代替传统的矩形桩,研究其对结构静力的影响。结果表明:相同桩间中心距时,以X形桩替代后可减小前墙弯矩;在同等桩间净距1.75 m下,两类模型的前墙最大弯矩基本相同。相同荷载作用下,前墙位移主要受桩间中心距影响,X形桩形状影响效应很小;锚碇墙水平位移受桩间中心距和遮帘桩形状的影响均很小。桩间中心距、净距与桩间土体土拱效应直接相关,对前墙弯矩、土压力、遮帘桩弯矩等有显著影响。桩间中心距为4.05 m或桩间净距为1.75 m时,结构内力改善效果较优,可采用该间距的X形桩替代矩形桩,节约工程造价。     

基于分子动力学模拟的橡胶改性沥青在集料表面的扩散特征研究

橡胶改性沥青和集料之间的界面作用与沥青路面的耐久性、高温稳定性有着重要联系而现有研究对该界面作用的微观认知尚不够全面。基于分子动力学模拟,以Materials Studio软件为研究工具,构建由基质沥青、天然橡胶沥青、顺丁橡胶沥青、丁苯橡胶沥青（15%掺量）与集料的4种主要矿物组成（石英、方解石、钠长石、微斜长石）两两构成的界面模型,从分子尺度上探究不同沥青组分在4种矿物表面的扩散行为,分析得到不同橡胶类型对其扩散作用的影响规律。结果表明：轻质组分在各矿物表面的扩散作用强于重质组分,相对分子质量对沥青组分的扩散速率起到关键作用;在不同矿物表面,橡胶分子链的加入对于提升沥青各组分扩散系数多为积极作用,且不同类型橡胶作用规律有所不同。研究结果可为不同矿料类型制备适配的橡胶改性沥青提供参考依据。     

基于动态分频段FRA法的自耦变压器绕组轴向移位故障诊断

针对传统的频率响应分析(FRA)法无法识别自耦变压器绕组常见轴向移位故障的问题,提出基于动态分频段的FRA法:首先,搭建自耦变压器轴向移位故障模拟平台,获取不同轴向移位故障下绕组频响数据;其次,将幅频特性曲线波峰点与相频特性曲线C-L过零点频率相同的点作为预备分频点,同时将频响数据动态划分为多个频段,并绘制分频段极坐标图;然后,提取极坐标图的4个灰度梯度共生矩阵纹理特征和对应的归一化特征参数;最后,通过图形与特征的变化规律分析自耦变压器绕组的状态。试验验证结果表明:采用基于动态分频段的FRA法,生成的极坐标图数据点重叠情况得到改善,有利于图形分析和特征提取;不同绕组发生轴向移位故障时,各频段极坐标图变化趋势明显;同一绕组发生不同程度轴向故障时,极坐标图随故障程度增加差异呈变大的趋势;采用基于动态分频段的FRA法能准确区分自耦变压器轴向移位的故障绕组与故障程度,并能为自耦变压器现场故障诊断提供参考。     

Optimization of horizontal alignment geometry in road design and reconstruction

This paper presents a general formulation for optimization of horizontal road alignment, composed of tangential segments and circular curves suitably connected with transition curves (clothoids). It consists of a constrained optimization problem where the objective function is given by a line integral along the layout. The integrand is a function representing the cost of the road going through each point and, by considering different costs, a wide range of problems can be included in this formulation. To show it, we apply this methodology to three different situations. The two first cases are related with the design of a new road layout and used to solve a pair of academic examples. The third problem deals with the improvement of a road adapting the old path to current legislation, and it is solved taking as case study the reconstruction project for a regional road (NA-601) in the north of Spain.     

基于Takens理论和SVM的滑坡位移预测

针对滑坡变形时序非线性,数据量少的特点,引入Takens理论,采用支持向量机(SVM)建立其预测模型,建模过程中,比较了由不同核函数获得的SVM模型的性能,同时将SVM与RBF、El-man神经网络模型进行外推7步预测试验比较。结果表明:RBF核函数具有更好的工程实用价值;在有限样本情况下,SVM预测模型具有更好的准确性和泛化性,其7步预测平均误差率控制在5%以内,可见该方法在滑坡变形预测方面极具潜力。