基于反馈通道混合磁链模型观测器的定子磁场定向矢量控制

从理论上分析了定子磁场定向矢量控制的特点，对几种常见的定子磁链观测方法进行了深入地分析和比较，最后设计出一种基于反馈通道的混合磁链模型观测器，给出模型转换点的选取方法。仿真验证该模型对定子、转子电阻的鲁棒性强，模型转换过程磁链、转矩过渡平滑。     

多功能远洋渔船主推进系统和电站配置研究综述

明确了多功能远洋渔船的发展前景及意义,结合中国远洋渔船发展现状提出了中国多功能远洋渔船主推进系统设计的四种可行性方案。分析了典型的多功能远洋渔船运行工况,并以此为基础给出了柴油机推进方案,电力推进方案,轴带发电机方案,以及混合电力推进方案研究方法。强调了每种设计方案的重点,并分析了每种方案优缺点,为后继开展更为深入的研究和实际工程应用提供了借鉴与参考。     

串联式混合动力船舶能源系统运行模式切换策略

为了解决内河电力推进船舶混合动力能源系统运行模式的切换控制问题,以动力电池剩余电量、电池工作温度以及船舶电力推进需求功率作为特征因素,以混合动力能源系统运行模式作为决断输出,建立了基于模糊综合评判方法的船舶混合能源系统运行模式切换控制模型及其控制策略。以实验室的船舶航行工况数据作为试验仿真环境,结果表明,这种方法能够智能地自动切换运行模式,实现了电力推进船舶混合动力能源系统的优化管理,同时能够保证动力电池的工作性能,延长电池寿命。     

Excitation force analysis of a powertrain based on CAE technology

The excitation force of a powertrain is one of major sources of interior noise in a vehicle. This paper presents a novel approach to predict the interior noise caused by the vibration of the powertrain by using the hybrid TPA (transfer path analysis) method. Although the traditional transfer path analysis (TPA) is useful for the identification of powertrain noise sources, it is difficult to modify the structure of a powertrain by using experiments for the reduction of vibration and noise. In order to solve this problem, the vibration of the powertrain in a vehicle is numerically analyzed by using the finite element method (FEM). The vibration of the other parts of the vehicle is investigated by using experiments based on vibrato-acoustic transfer function (VATF) analysis. These two methods are combined for the prediction of interior noise caused by a powertrain. Throughout this research, two papers are presented. This paper presents a simulation of the excitation force of the powertrain exciting the vehicle body based on numerical simulation. The other paper presents a prediction of interior noise based on the hybrid TPA, which uses the VATF of the car body and the excitation force predicted in this paper.     

混合动力汽车及其动力匹配策略

为应对石油危机及大气污染,混合动力汽车（HEV）成为汽车行业的研究重点。从动力来源、动力混合程度及动力系统布置及组合方式3方面对HEV进行分类,介绍了串联式、并联式及混联式HEV的结构形式及优缺点。将当前的控制策略归为基于规则的控制策略和基于系统优化的控制策略,指出当前的控制策略无法自适应复杂路况的需求,不够智能,不利于整车性能提高。提出兼顾整车性能的多智能体集成控制是未来HEV控制策略的研究重点。     

基于LJ-GCEMC的炭化木纤维滤芯超微粒子吸附模拟

炭化微米木纤维(CMWF)滤芯不但绿色环保、成本低、净化效率高,而且特有的活性炭性质使其对柴油机排放中的超微碳烟颗粒具有很强的吸附能力。分析炭化微米木纤维滤芯及柴油车排放颗粒物特性,利用混合Lennard Jones势能——巨正则系综蒙特卡罗法(混合LJ-GCEMC)模拟超微碳烟颗粒在炭化微米木纤维活性炭孔中的吸附,结果表明,CMWF滤芯的孔径范围可以确定为320⁴20 nm之间,孔径过小或过大都会阻碍积聚态粒子吸附数密度的增加;模拟结果也表明积聚态粒子吸附数密度随压力的增加而增加,而随温度的升高略有减少。     

串联式混合动力公交车可靠性分析

根据某混合动力公交车在运行时所反映出的各种故障,对整车可靠性进行了分析,并在分析基础上提出混合动力车的可靠性分配原则(技术水平、复杂程度、重要程度、工作环境),使该车满足系统为串联结构、各部分寿命服从指数分布、每个单元容许失效率为λt时其可靠度可用1-λt近似表示这些条件.     

混合动力客车整车控制器硬件设计

基于模块化设计思想,介绍了混合动力客车整车控制器硬件设计。在Multisim 10．0和SEAT电路设计与分析功能辅助下,设计了电源模块、模拟信号输入模块、转速测量模块、开关量输入模块、通信模块。测试与调试结果均表明,所设计的整车控制器具有高精度、高速度和高可靠性,满足功能和性能要求。     

Performance analysis of a CVT clutch system for a hybrid electric vehicle

In this study, the performance of a CVT clutch system for a hybrid electric vehicle was investigated. To analyzed the vehicle performance at restart, the restart delay and driveshaft torque was investigated by simulations and experiments. It was found from the simulation results that the vehicle restart response depends on the clutch pressure buildup time to the point where the clutch torque begins to overcome the vehicle road load, and driving comfort at restart is directly related to the rate change of the clutch pressure.