变频器输出电压du/dt对电机的影响及其滤波器的设计

研究了变频器输出电压du/dt对电机端电压和轴承电流的影响,在PSpice中建立了电机高频模型,并对端电压波形进行了仿真;着重研究了一种du/dt滤波器的参数设计方法,并且进行了仿真和实验验证。实践证明,该滤波器具有较好的滤波效果。     

HXD1B型机车大螺栓的强度及预紧分析

文章介绍了HXD1B型机车大螺栓的安装结构及其作用,对大螺栓的轴向工作载荷、预紧力、强度等进行计算和校核,比较了力矩法、测量螺栓伸长法、应变计法等三种不同的预紧力控制方法的优缺点,提出影响大螺栓预紧力控制的各种因素并进行分析,最终确定适用于大螺栓的预紧力及其相应的控制方法.     

CARD/1系统在互通立交设计绘图上的应用与开发

通过对CARD/1系统在T型（Y型）互通式立体交叉设计绘图上的二次开发，使T型（Y型）互通式立体交叉的设计绘图达到一体化。     

我国汽车行业电子商务发展模式研究

文章针对目前国内汽车电子商务模式的几点争论，结合中国电子商务的现实环境和汽车行业的实际情况。进行了充分论证。并借鉴国外汽车行业电子商务发展模式．提出了适台鼗国汽车行业电子商务的三阶段发展模式。     

Wheel-rail contact models for vehicle system dynamics including multi-point contact

Advanced modelling of rail vehicle dynamics requires realistic solutions of contact problems for wheels and rails that are able to describe contact singularities, encountered for wheels and rails. The basic singularities demonstrate themselves as double and multiple contact patches. The solutions of the contact problems have to be known practically in each step of the numerical integration of the differential equations of the model. The existing fast, approximate methods of solution to achieve this goal have been outlined. One way to do this is to replace a multi-point contact by a set of ellipses. The other methods are based on so-called virtual penetration. They allow calculating the non-elliptical, multiple contact patches and creep forces online, during integration of the model. This allows nearly real-time simulations. The methods are valid and applicable for so-called quasi-Hertzian cases, when the contact conditions do not deviate much from the assumptions of the Hertz theory. It is believed that it is worthwhile to use them in other cases too.     

Simulation on progressive collapse behaviour of whole ship model under extreme waves using idealized structural unit method

To ensure the safety of navigating ship, working loads and structural load-carrying capacity are two important aspects. In the present paper, a total simulation system combing load calculation and structural collapse analysis is applied to simulate progressive collapse behaviour of a single-hull Kamsarmax type bulk carrier. A three dimensional singularity distribution method is adopted to calculate pressure distribution with time history. A mixed structural model, collapse part simulated by ISUM elements and remaining part by elastic FEM elements with relative coarse mesh, is proposed for collapse analysis. Progressive collapse behaviour obtained by ISUM is good agreement with that by nonlinear software package, MARC. However, the calculation time of ISUM analysis is about 1/70 of MARC analysis. The applicability to structure system, high accuracy and sufficient efficiency of ISUM had been demonstrated.     

R/S分析法在盾构下穿机场过程中的地表变形规律研究

为保证机场的正常运营,在盾构下穿机场的施工过程中,对地表沉降变形控制的要求较高,因此对穿越过程中的施工控制和变形规律研究具有重要意义。首先,基于盾构下穿机场的工程条件,分析盾构下穿过程中的风险,并提出相应的控制措施;同时,根据现场监测数据,分析盾构下穿机场过程中的地表沉降变形规律,并利用R/S分析法对地表沉降的发展趋势进行研究。结果表明:盾构施工引起的机场地表变形均在控制值范围以内,且各监测点在不同序列条件下的Hurst指数均大于0.5,具有沉降持续减弱的趋势,验证下穿过程中风险控制措施的有效性,为类似下穿机场的盾构施工提供一定的实践经验,也为盾构施工引起的地表沉降变形规律研究提供参考。     

船舶低硫柴油系统设计的分析与优化

就新辟航线首制船“汉亚直达”集装箱船的低硫柴油系统,叙述了船舶低硫柴油系统的设计经验,从当前国内外对船用燃油硫含量的要求、应对方案到船舶低硫柴油冷却方式选择、低硫柴油冷却系统设计、高/低硫柴油转换、使用低硫柴油风险分析及处理等方面进行详细叙述,为业内同行提供参考。     

Tyre/road noise damping characteristics using nomographs and fundamental vibroacoustical relationships

Several studies have successfully developed laboratory and field measurement techniques to estimate tyre/road noise damping characteristics. However, laboratory–field noise correlations of pavement types in the form of nomographs is essential to cognize the pavements’ acoustical properties from a practical perspective. A toolkit that readily provides field tyre/road noise intensity of different pavement materials is needed. Thus, the main objective of this study was to develop nomographs with relationships for tyre/road noise versus pavement materials’ viscoelastic–vibroacoustical properties. Isothermal and isochronal nomographs of phase angle–tyre/road noise as toolkits were developed based upon well-established phase angle and noise intensities typical of mixtures, making the nomograph correlations very authentic, realistic, and novel along with benefit to predict tyre/road noise at any desired temperature and traffic speed (or frequency) combination. This study is envisaged to benefit in the discernment of road materials’ damping capabilities from vibroacoustical and field noise–viscoelastic relation aspects.     

船舶推进同步电机PTI/PTO模式研究

PTI/PTO推进是最近发展起来的一种新型船舶推进方式,兼具传统柴油机推进和电力推进优点,可实现多种船舶工作模式,具有操控性好、安全、经济等特点,将是未来船舶推进方式发展方向之一.本文介绍了PTI/PTO推进模式理论和工作模式,便于理解该推进方式,希望有助于船舶推进技术的发展.