太阳能游船光伏逆变器控制系统EMC设计

从船舶环境和光伏逆变器的基本原理和功能出发,分别对太阳能游船EMC干扰源和干扰路径进行分析,通过信号滤波与保护、工艺设计和试验测试,实现高可靠性的太阳能游船光伏逆变器控制系统研究和设计,为太阳能游船的光伏逆变器控制系统研究提供基本EMC设计思路与实现技巧。     

哈牡线季节性冻土接触网基础处理措施探讨

针对哈尔滨至牡丹江电气化改造工程季节性冻土分布的实际工程特点,结合季节性冻土条件下接触网基础的设计理念,对本项目选用的扩大型钢柱基础和不带扩底的拉线基础进行切向冻胀应力计算分析,并考虑影响切向冻胀力的水分、土质、负温以及基础侧表面的粗糙度等主要因素,提出了对钢柱基础采用换填加扩大型基础的处理措施,对接触网的下锚拉线基础提出了换填及加大埋深等防冻胀处理措施以抵抗季节性冻土的上拔力。     

舱口盖强度计算方法

在某集装箱舱口盖结构强度的有限元计算中，对舱口盖周围水平限位器和支撑块处的约束以及顶部压紧器处的关联程度进行了模拟，分别讨论了在垂向设计载荷的情况下，水平限位器、支撑块处的不同约束以及顶部压紧器的不同关联程度对舱口盖应力分布的影响，得出更符合实际情况的舱口盖结构强度计算方法。     

Hardware-in-the-loop testbed for evaluating connected vehicle applications

Connected vehicle environment provides the groundwork of future road transportation. Researches in this area are gaining a lot of attention to improve not only traffic mobility and safety, but also vehicles’ fuel consumption and emissions. Energy optimization methods that combine traffic information are proposed, but actual testing in the field proves to be rather challenging largely due to safety and technical issues. In light of this, a Hardware-in-the-Loop-System (HiLS) testbed to evaluate the performance of connected vehicle applications is proposed. A laboratory powertrain research platform, which consists of a real engine, an engine-loading device (hydrostatic dynamometer) and a virtual powertrain model to represent a vehicle, is connected remotely to a microscopic traffic simulator (VISSIM). Vehicle dynamics and road conditions of a target vehicle in the VISSIM simulation are transmitted to the powertrain research platform through the internet, where the power demand can then be calculated. The engine then operates through an engine optimization procedure to minimize fuel consumption, while the dynamometer tracks the desired engine load based on the target vehicle information. Test results show fast data transfer at every 200 ms and good tracking of the optimized engine operating points and the desired vehicle speed. Actual fuel and emissions measurements, which otherwise could not be calculated precisely by fuel and emission maps in simulations, are achieved by the testbed. In addition, VISSIM simulation can be implemented remotely while connected to the powertrain research platform through the internet, allowing easy access to the laboratory setup.     

视讯会议系统“一键点名”功能硏究

以铁路视讯会议网工程建设标准和视讯会议系统网管的标准配置文件为基础,通过反复试验和结果分析,确定广铁集团视讯会议操作繁琐的原因,并提出相应的优化方案,提高了广铁集团视讯会议系统会议控制的效率。     

Evaluating determinants of attractiveness and their cause-effect relationships for container ports in Taiwan: users’ perspectives

The attractiveness of ports is usually a pre-requisite and necessary condition for ports to achieve competitiveness, as well as the springboard to explore the competitive advantages of ports. To determine whether a port is competitive, it is necessary to explore whether it boasts certain factors that make the port attractive to users. The main purpose of this article is to apply the Analytic Hierarchy Process (AHP) method and the Decision Making Trial and Evaluation Laboratory (DEMATEL) technique to evaluate key determinants of attractiveness and their cause/effect relationships for container ports in Taiwan. The empirical results showed that: (1) Top six determinates of attractiveness for container ports are ‘ample cargo sources,’ ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ ‘efficient wharf operations,’ and ‘adequate wharfs and back-line land,’ respectively. (2) Among the above six determinants of attractiveness, ‘ample cargo sources’ is the cause determinant. Three determinants of port attractiveness, ‘favorable port charges,’ ‘dense ship network and routes,’ ‘low transshipment costs,’ which are the effect determinants. They are affected by the determinants of attractiveness of ‘ample cargo sources’. In addition, this study discusses the above findings and expects to provide the study results to Taiwan’s port authorities for reference.     

Highway voting system: Embracing a possible paradigm shift in traffic data acquisition

The integration of internet and mobile phones has opened the door to a new wave of utilizing private vehicles as probes not only for performance evaluation but for traffic control as well, gradually replacing the role of traffic surveillance systems as the dominant source of traffic data. To prepare for such a paradigm shift, one needs to overcome some key institutional barriers, in particular, the privacy issue. A Highway Voting System (HVS) is proposed to address this issue in which drivers provide link- and/or path-based vehicle data to the traffic management system in the form of “votes” in order to receive favorable service from traffic control. The proposed HVS offers a platform that links data from individual vehicles directly with traffic control. In the system, traffic control responds to voting vehicles in a way similar to the current system responding to prioritized vehicles and providing the requested services accordingly. We show in the paper that the proposed “voting” system can effectively resolve the privacy issue which often hampers traffic engineers from getting detailed data from drivers. Strategies to entice drivers into “voting” so as to increase the market penetration level under all traffic conditions are discussed. Though the focus of the paper is on addressing the institutional issues associated with data acquisition from individual vehicles, other research topics associated with the proposed system are identified. Two examples are given to demonstrate the impact of the proposed system on algorithm development and traffic control.     

Traffic modelling in system boundary expansion of road pavement life cycle assessment

This paper uses a case study of a UK inter-urban road, to explore the impact of extending the system boundary of road pavement life cycle assessment (LCA) to include increased traffic emissions due to delays during maintenance. Some previous studies have attempted this but have been limited to hypothetical scenarios or simplified traffic modelling, with no validation or sensitivity analysis. In this study, micro-simulation modelling of traffic was used to estimate emissions caused by delays at road works, for several traffic management options. The emissions were compared to those created by the maintenance operation, estimated using an LCA model. In this case study, the extra traffic emissions caused by delays at road works are relatively small, compared to those from the maintenance process, except for hydrocarbon emissions. However, they are generally close to, or above, the materiality threshold recommended in PAS2050 for estimating carbon footprints, and reach 5–10% when traffic flow levels are increased (hypothetically) or when traffic management is imposed outside times of lowest traffic flow. It is recommended, therefore, that emissions due to traffic disruption at road works should be included within the system boundary of road pavement LCA and carbon footprint studies and should be considered in developing guidelines for environmental product declarations of road pavement maintenance products and services.     

Nonlinear pricing in linear cities with elastic demands

Nonlinear road pricing charges each traveler based on his/her trip’s corresponding particular attribute level. In order to help authorities in designing road pricing systems at a strategic level, this paper attempts to address two fundamental questions: (i) what is the value of pricing’s nonlinearity for mitigating traffic congestion? (ii) if a nonlinear toll function is implemented, should it be convex, concave or other shape? Specifically, we consider distance-based pricing in linear cities. For linear monocentric cities with heterogeneous travelers, we show that the system optimal distance-based pricing indeed exhibits nonlinearity. It is proved that: (i) the cost-based system optimal toll function is monotonically increasing and concave with respect to the traveled distance; (ii) the time-based system optimal toll function always exists and is unique. If the initial proportion of each traveler group is invariant along a corridor and the demand function is of exponential type, then the time-based system optimal toll function enables the travelers, living further away from a city center, to face a lower toll level per unit distance. For a linear polycentric city, we demonstrate: (i) there always exists the system optimal differentiated (in terms of city centers) toll functions; (ii) it is highly possible that the system optimal non-differentiated toll function does not exist. Hence, we further propose an optimal toll design model, prove the Lipschitz continuity of its objective and adopt a global-optimization algorithm to solve it.     

Fractional-order-based ACC/CACC algorithm for improving string stability

Traffic flow optimization and driver comfort enhancement are the main contributions of an Adaptive Cruise Control (ACC) system. If communication links are added, more safety and shorter gaps can be reached performing a Cooperative-ACC (CACC). Although shortening the inter-vehicular distances directly improves traffic flow, it can cause string unstable behavior. This paper presents fractional-order-based control algorithms to enhance the car-following and string stability performance for both ACC and CACC vehicle strings, including communication temporal delay effects. The proposed controller is compared with state-of-the-art implementations, exhibiting better performance. Simulation and real experiments have been conducted for validating the approach.