Integrated models of land use and transportation for the autonomous vehicle revolution

ABSTRACT

The advent of the autonomous vehicle (AV) will affect not only the transportation system, but also future patterns of land development. Integrated land use and transportation models will be critical tools in assessing the path forward with this technology. Key questions with respect to land use impacts of AVs arise from potential changes in sensitivity to travel and reduced demand for parking. It is an open question whether AVs will induce urban sprawl, or whether spatial economies of agglomeration will mitigate any reductions in travel time sensitivity. The deployment of shared fleets of AVs would likely reduce parking demand, producing yet to be explored impacts on property development within existing urban footprints. We perform a critical assessment of currently operational models and their ability to represent the adoption of AVs. We identify the representation of time in such models as a vital component requiring additional development to model this new technology. Existing model applications have focused on the discrete addition of new infrastructure or policy at a fixed point in time, whereas AV adoption will occur incrementally through time. Stated adaptation surveys are recommended as tools to quantify preferences and develop relevant model inputs. It is argued that existing models that assume comparatively static equilibrium have been convenient in the past, but are insufficient to model technology adoption. In contrast, dynamic model frameworks lack sufficient structure to maintain reasonability under large perturbations from base conditions. The ongoing advancement of computing has allowed models to move away from being mechanistic aggregate tools, towards behaviourally rich depictions of individual persons and firms. However, much work remains to move from projections of existing conditions into the future, to the evolution of the spatial economy as it evolves through time in response to new technologies and exogenous stresses. Principles from complex and evolutionary systems theory will be important in the development of models with the capacity to consider such dynamics.     

铁路牵引供电系统安全防护与优化技术方案硏究

为了提高铁路牵引供电系统安全防护等级,加强防范强电侵入的能力,减少雷击事故对铁路运输以及设备维护造成的经济损失,本文分析了牵引变电所常见的强电侵入类型及途径,针对现有问题逐一提出了优化技术方案,并阐述了研究思路及方案具体实施方法。     

运营期高速铁路轨道长波不平顺静态测量方法及控制标准

现有高速铁路轨道长波不平顺静态检测主要采用矢距差法或简化矢距差法,存在与检测起点相关、含有里程相位差、基础变形时检测幅值偏大、与车体振动加速度匹配性较差等缺点。利用中点弦测法对轨道长波不平顺进行静态检测,通过对中点弦测法不同测弦长度有效测量波长范围和列车敏感波长分析,采用60 m测弦长度的中点弦测法最适合时速300~350 km运营期高速铁路;利用车辆-轨道动力学仿真分析和最小二乘法拟合相结合方法,提出运营期高速铁路300及350 km·h^-1速度下的轨道长波高低不平顺控制标准,并进行实例验证。结果表明:60 m弦中点弦测法既可保证轨道长波不平顺检测的准确性,又能很好地体现车体振动响应;时速300 km运营期高速铁路轨道长波高低不平顺3级控制标准建议值分别为9,15,21 mm;时速350 km分别为7,11,15 mm。     

基于Cognex视觉的机器人自动搬运控制

针对企业原有生产圆盘类连接轴的工艺,设计了基于Cognex视觉的机器人自动搬运系统,将S7-300 PLC、Cognex视觉系统和FANUC机器人系统集成在一起,实现了1台机器人同时为铣床和车床2个加工系统自动上下料;通过Profibus总线和Ethernet通讯将PLC技术、视觉技术与工业机器人结合起来,发挥了工业以太网传输速度快、信号稳定的优势,提高了机器人的柔性取料能力;目前已应用在企业当中,提高了企业的自动化程度及生产效率,降低了企业的用工支出。     

A new solution for two-bag air suspension system with leaf spring for heavy-duty vehicle

The design problem of a two-bag air suspension system for heavy-duty vehicles is formulated as a two-level (suspension system level and component level) optimization problem. At the suspension system level, optimal stiffness matrix of leaf spring, characteristics of damper and upper rod layout are determined by solving a multi-objective constrained optimization problem with response surface. At the component level, shape and thickness of the leaf spring are formed using cubic-spline curves to make the stiffness matrix as close to the target values cascaded from suspension system level as possible. Simulations using a vehicle model described by multi-body model and FEM of the novel leaf spring validate the suspension system thus derived.     

狗左右心室和肺循环功能的同步测定与评价

本文介绍了狗左、右心室和肺循环功能的同步测定方法,并同时观察了左、右心室收缩、舒张性能、泵功能和肺循环功能的多项指标。在实验条件下,动物的生理状况在3小时内基本稳定。     

S^2 BHCA Multiple AUVs cooperation oriented control architecture

Oceanographic survey, or other similar applications should be the applications of multiple AUVs. In this paper, the skill ＆ simulation based hybrid control architecture （S^2BHCA） as the controller＇s design reference was proposed. It is a multi-robot cooperation oriented intelligent control architecture based on hybrid ideas. The S^2BHCA attempts to incorporate the virtues of the reactive controller and of the deliberative controller by introducing the concept of the ＂skill＂. The additional online task simulation ability for cooperation is supported, too. As an application, a multiple AUV control system was developed with three ＂skills＂ for the MCM mission including two different cooperative tasks. The simulation and the sea trials show that simple task expression, fast reaction and better cooperation support can be achieved by realizing the AUV controller based on the S^2BHCA.     

几种常见形式的等效阶梯截面

针对许多平面杆系桥梁分析软件仅提供梯形分块法的截面尺寸输入方式和截面几何特性已知或者有解析表达式的带有曲边的截面不便直接使用梯形分块法的问题，利用桥梁结构平面计算中截面等效的概念．提出了等效算法，构造了节线数不多于6的等效阶梯截面，推导了等效阶梯截面几何要素的一般计算公式．给出了圆形、圆环等几种常用截面形式的不多于6条节线等效阶梯截面尺寸计算的具体而又简捷的公式。     

我国电力机车及动力车通风系统

简要地说明了我国电力机车及动力车通风系统的发展情况，尤其是交流传动技术对我国电力机车及动力车通风系统的发展的重要影响，同时，还详细分析了各种通风方式的特点，为电力机车及动力车通风系统简统化设计提供了多种选择模式。     

船舶除锈机器人驱动系统设计

介绍了应用在船舶除锈的磁吸附爬壁机器人本体驱动系统的设计,着重阐述了系统的驱动原理和驱动电路。系统以89c51单片机为核心,通过键盘以及通信接口可以方便的控制步进电机带动机器人本体运动,充分发挥了单片机的优势。实验表明,系统电路设计合理,简单实用。