模糊数据库技术在航海避碰决策支持系统中的应用

将航海避碰案例规范化 ,并根据案例中部分信息的不精确性 ,在数据库系统的数据表示和查询中引入模糊技术 ,从而形成了一个模糊关系型的避碰案例数据库系统 ,并将其嵌入到航海避碰决策支持系统当中 ,为安全航行提供了更丰富的决策信息。     

CTCS-3级列控系统RBC切换过程分析

RBC根据轨道电路、联锁进路等信息生成行车许可,通过GSM-R无线通信系统传输给车载设备。受单套RBC控制能力限制,在相邻RBC控制范围的边界处必须实现对列车控制权的安全可靠切换。分别对车载设备采用2部或1部车载电台时的RBC切换过程进行了深入分析,并在详细分析RBC切换过程的基础上,用着色Petri网的支持工具CPNTools对该过程进行了形式化建模,对所建立的模型进行了仿真,对用自然语言描述的RBC切换过程进行了形式化表示和验证。     

微型客车正面碰撞计算机仿真时问与精度研究

结合国内软硬件资源条件 ,着重探讨了汽车碰撞计算机仿真分析所面临的关键技术难点和汽车各部件正面碰撞的建模策略 ,模拟结果在整车及主要吸能结构的变形模式、典型测点的加速度时间历程等方面均与实车碰撞试验结果吻合良好。     

HEV驱动系统的键合图建模和仿真计算

在深入研究某种混合动力汽车(HEV)驱动系统及其各单元动态特性的相互关系的基础上，运用键合图原理对该系统进行数学建模，并应用Matlab／Simulink进行仿真计算和研究。研究表明，所建模型较准确地反映HEV的动态特性，并发现由于多动力耦合中弹性与柔性耦合影响导致的载荷与运动波动，并证明调整阻尼可有效减小波动。     

BIM与GIS融合技术在航道整治工程中的应用

针对航道整治工程中BIM技术无法管理条带状工程、难以表达工程周边地理信息等难点,通过梳理BIM与GIS数据特点,研究探索BIM与GIS融合技术,提出了通过格式转换、坐标转换和数据关联实现BIM与GIS融合的方法。将研究成果应用在蕲春水道航道整治工程,验证了BIM与GIS融合方法的可行性,实现了BIM与GIS数据一体化浏览、显示、管理、分析等功能,解决了BIM无法管理大范围工程、无法反映工程周边环境的不足,为BIM与GIS技术在航道整治工程中的应用提供了技术支撑。     

Seasonal and interannual variation of physical and biological processes during 1994–2001 in the Sea of Japan/East Sea: A three-dimensional physical–biogeochemical modeling study

A Pacific basin-wide physical–biogeochemical model has been used to investigate the seasonal and interannual variation of physical and biological fields with analyses focusing on the Sea of Japan/East Sea (JES). The physical model is based on the Regional Ocean Model System (ROMS), and the biogeochemical model is based on the Carbon, Si(OH)₄, Nitrogen Ecosystem (CoSiNE) model. The coupled ROMS–CoSiNE model is forced with the daily air–sea fluxes derived from the National Centers for Environmental Prediction (NCEP) and the National Center for Atmospheric Research (NCAR) reanalysis for the period of 1994 to 2001, and the model results are used to evaluate climate impact on nutrient transport in Mixed Layer Depth (MLD) and phytoplankton spring bloom dynamics in the JES.The model reproduces several key features of sea surface temperature (SST) and surface currents, which are consistent with the previous modeling and observational results in the JES. The calculated volume transports through the three major straits show that the Korea Strait (KS) dominates the inflow to the JES with 2.46 Sv annually, and the Tsugaru Strait (TS) and the Soya Strait (SS) are major outflows with 1.85 Sv and 0.64 Sv, respectively. Domain-averaged phytoplankton biomass in the JES reaches its spring peak 1.8 mmol N m^− 3 in May and shows a relatively weak autumn increase in November. Strong summer stratification and intense consumption of nitrate by phytoplankton during the spring result in very low nitrate concentration at the upper layer, which limits phytoplankton growth in the JES during the summer. On the other hand, the higher grazer abundance likely contributes to the strong suppression of phytoplankton biomass after the spring bloom in the JES. The model results show strong interannual variability of SST, nutrients, and phytoplankton biomass with sudden changes in 1998, which correspond to large-scale changes of the Pacific Decadal Oscillation (PDO). Regional comparisons of interannual variations in springtime were made for the southern and northern JES. Variations of nutrients and phytoplankton biomass related to the PDO warm/cold phase changes were detected in both the southern and northern JES, and there were regional differences with respect to the mechanisms and timing. During the warm PDO, the nutrients integrated in the MLD increased in the south and decreased in the north in winter. Conversely, during the cold PDO, the nutrients integrated in the MLD decreased in the south and increased in the north. Wind divergence/convergence likely drives the differences in the southern and northern regions when northerly and northwesterly monsoon dominates in winter in the JES. Subjected to the nutrient change, the growth of phytoplankton biomass appears to be limited neither by nutrient nor by light consistently both in the southern and northern regions. Namely, the JES is at the transition zone of the lower trophic-level ecosystem between light-limited and nutrient-limited zones.     

A stochastic optimization approach for the selection of reflective cracking mitigation techniques

PurposeIn Hot Mix Asphalt (HMA) overlays, the existing cracks in the underlying pavements can propagate upward to the new added overlay and may cause Reflective Cracks (RC). These cracks allow water infiltration to the underlying layers and causes further moisture damage as well as weakening the unbound layers. Over the years, several methods have been developed for mitigating the RCs. This study aims to investigate the current reflective cracking mitigation methods and develop a methodology for the selection of appropriate mitigation technique. The developed model is then applied to a case study in the state of Florida.MethodTo accomplish this goal, a nationwide literature review was conducted to better understand the current in practice methods in the United States. Moreover, a life cycle cost analysis (LCCA) in five different road types was performed to find the annuity of roadway rehabilitation for each of the mitigation methods. The uncertainty in the LCCA results is represented using Exploratory Modeling and Analysis (EMA) method. Then through a Multi Criteria Decision Making (MCDM) model, a stochastic optimization model was developed to find the appropriate reflective cracking mitigation solution under Florida’s climate and road conditions, based on different cost and performance weights.ResultsBased on the available data for the state of Florida, the LCCA results indicate that the annuity of maintaining the roadway with Fabrics and ISAC are lower compared to other methods. However, the results of stochastic optimization model reveal that while looking at the performance and cost at the same time, different methods would be more feasible. For instance, while the cost of the used method does not matter at all and only performance matters, STRATA® is more probable to be the appropriate mitigation technique. The findings of this research are critical for decision makers to better understand the most cost-effective mitigation technique in different conditions.     

键合图理论在汽车系统分析与控制中的应用

本文分析了键合图理论特点，简介了键合图基本原理及国内外发展概况，重点论述了键合图理论在汽车系统分析与控制的建模和仿真的应用。     

汽车动态仿真中车身点焊有限元建模的新方法

对点焊连接提出了一种新的模拟技术,即不同于传统的节点对节点模拟焊接。新型焊接单元在有限元节点与单元之间引入一短梁单元来模拟焊接关系,单元承受拉伸力和剪切力。仿真实例说明,此新型焊接单元,既保证了仿真计算的可靠,又避免了传统算法中细化局部网格的处理,减轻了工作量。     

计算机辅助汽车造型设计方法与应用

建立了计算机辅助汽车造型设计系统，采用矢量化软件和通用ＣＡＤ软件在工作站上进行汽车造型设计，具有较好的实用性，通用性，周期短，等特点。