电压型逆变器输出电压检测与数字滤波方法研究

针对实时、准确地检测电压型逆变器输出电压基波比较困难的问题，从检测逆变器的直流支撑电压入手，提出了一种根据控制器的输出脉冲序列，利用ＤＳＰ进行实时计算逆变器输出电压基波瞬时输出值的新方案，试验结果证明了方案的可行性。     

Impacts of motor vehicle operation on water quality in the US – Cleanup costs and policies

This paper investigates the costs of controlling some of the environmental impacts of motor vehicle transportation on groundwater and on surface waters. We estimate that annualized costs of cleaning-up leaking underground storage tanks range from $0.8 billion to $2.1 billion per year over 10 years. Annualized costs of controlling highway runoff from principal arterials in the US are much larger: they range from $2.9 billion to $15.6 billion per year over 20 years (1.6–8.3% of annualized highway transportation expenditures). Some causes of non-point source pollution were unintentionally created by regulations or could be addressed by simple design changes of motor vehicles. A review of applicable measures suggests that effective policies should combine economic incentives, information campaigns, and enforcement, coupled with preventive environmental measures. In general, preventing water pollution from motor vehicles would be much cheaper than cleaning it up.     

一种电流型PWM逆变器的电荷轨迹控制法

采用空间向量原理，从空间电荷向量端点轨迹逼近于国出发，推导出ＰＷＭ脉冲模式的算法，同时采用８０９７微处理器实现这种脉冲模式和对逆变器进行控制。由实验波形看出，在较低频时逆变器的输出电流为三相对称的近似的正弦波电流，消除了低频时有害的寄生脉动转矩。     

Valuation of externalities through neo-classical methods by including institutional variables

Externalities are uncompensated influences that are not expressed in a market but that affect the production possibilities or the welfare level of third parties. An example is the noise pollution in airport areas. Although air transport is an important source of economic growth and employment in many countries, the social and environmental problems connected with this sector are rising rapidly. Consequently, airports are becoming a matter of concern to many politicians. On what kind of values should they base their decisions as to further growth or consolidation of the current situation? In this paper we discuss two approaches, one based on mainstream, neo-classical, economics, and one based on institutional approaches, more in particular new institutional economics, which can be seen as a development complementary to the mainstream.     

Correlation between automotive CO, HC, NO, and PM emission factors from on-road remote sensing: implications for inspection and maintenance programs

Carbon monoxide (CO), hydrocarbon (HC), and nitrogen oxide (NO) emission factors (EFs) are measured with a commercial vehicle emissions remote sensing system (VERSS) during a large-scale vehicle exhaust emissions study in Las Vegas. Particulate matter (PM) EFs are simultaneously measured for individual vehicles with a newly developed PM-VERSS based on ultraviolet backscatter light detection and ranging (Lidar). The effectiveness of CO and HC EFs as proxy for NO and PM EFs for spark-ignition vehicles is evaluated. Poor correlations were found between EFs for pollutants on an individual vehicle basis indicating that high EFs for one or more pollutants cannot be used as a predictor of high EFs for other pollutants. Stronger functional relationships became evident after averaging the EF data in bins based on rank-order of a single pollutant EF. Low overlap between the highest 10% emitters for CO, HC, NO, and PM was found. These results imply that for an effective reduction of the four pollutants, inspection and maintenance (I/M) programs, including clean screening, should measure all four pollutants individually. Fleet average CO and HC concentrations determined by gaseous VERSS were compared with fleet average CO and HC concentrations measured at low-idle and at high-idle during local I/M tests for spark-ignition vehicles. The fleet average CO concentrations measured by I/M tests at either idle were about half of those measured by remote sensing. The fleet average high-idle HC concentration measured by I/M tests was about half of that measured by VERSS while low-idle I/M and VERSS HC average concentrations were in better agreement. For a typical vehicle trip, most of the fuel is burned during non-idle conditions. I/M measurements collected during idling conditions may not be a good indicator of a vehicle’s potential to be a high emitter. VERSS measurements, when the vehicle is under a load, should more effectively identify high emitting vehicles that have a large contribution to the mobile emissions inventory.     

声强法在磁悬浮列车车厢声源识别中的应用

介绍了声强法中P—P技术的使用,并讨论了在使用P—P技术进行声强测量时的相位匹配问题。利用声强法对磁悬浮列车行驶时车厢内的声源进行了识别,并从频率响应的角度对分析结果进行了判断。可以得出,磁悬浮列车以430 km／h速度行驶时,噪声主要通过车厢壁面传入车内。研究了各声强测点处1／3倍频程频谱,分析了各测点处辐射声强对车内噪声频率成分的贡献。可以得出,车厢壁面在100 Hz以下的频率贡献较大,而其它频段上,各测点的贡献相当。     

两层流体中运动物体的兴波特性

研究了在两层流体中定常运动的三维物体产生的内波尾流场特性.在势流理论假设下,基于Green第三公式,建立了一组基于Rankine源的分层变形边界积分方程,提出了一种基于四节点双线性等参元的数值实现方法,有效地处理了在场点处立体角的计算和数值积分中的奇异性问题.对定常运动三维球体产生的表面波和内界面波进行了数值模拟,并与定常运动点源的结果进行了比较.     

Global cutting-path optimization considering the minimum heat effect with microgenetic algorithms

This article considers microgenetic algorithms (GAs), which explore in a small population with a few genetic operators, for cutting-path optimization problems. The major difference between GAs and simple genetic algorithms (SGAs) is how to make a reproductive plan for an improved searching technique because of population choice. It is shown that GAs implementation reaches the near-optimal region much earlier than the SGAs approach, and the GAs give a better solution than simulated annealing (SA). The main objective was to determine what temperature distribution can be obtained from the solution of a travelling distributed heat source. The solution of the travelling heat source on nested raw plate provides information about the vertices of each nested part of the raw plate. From the fact that the initial temperature at a piercing point strongly depends on the heat flow which stems from the previous cutting contour, the temperature of all piercing points must be lower than the critical temperature after each cutting of the components of a part. The critical temperature is identified as the mechanical melting temperature of steels. A heuristic back-tracking method is introduced to find the near-optimum cutting path considering the minimum heat effect on deformation. The heuristic back-tracking method is incorporated with the GAs.     

高速铁路噪声源区划及各区域声源贡献量分析

研究高速铁路噪声源区划方法并分析各区域声源贡献量,对高速铁路噪声治理有重要意义。基于高速铁路噪声源辨识现场测试,分析得到噪声源的位置和幅值。将噪声源按高度划分为轮轨区、车体下部、车体上部、集电系统和桥梁结构等5个区域,进一步将车体上部沿线路方向划分为车头区和非车头区,将集电系统区域沿线路方向划分为受电弓区和接触网区。根据声波能量叠加原理计算每个区域噪声源辐射功率,研究各个区域声源贡献量。分析结果表明,列车以300 km/h运行时,轮轨区噪声占48%,车体下部噪声占25%,合计占总噪声的73%,对高速铁路辐射噪声起主导作用。     

船舶压载水污染的控制和管理

压载水对现代船舶的安全航行是绝对必要的，但它对生态、经济和人类健康构成了严重威胁，排放船舶压载水被全球环境基金组织确认为危害海洋的四大威胁之一.为防止压载水带来的生物污染，除了在深海更换压载水外，IMO还提出了将来可能采用的一些方法，分析不同处理方法的经济性。