面向智能车辆的现役道路设施行驶适应性研究综述

为了总结面向智能车辆的现役道路设施行驶适应性，即现役道路基础设施承载智能车辆行驶的适宜程度，阐述自主智能驾驶定义与驾驶自动化等级分类，在此基础上剖析不同等级间的人机功能差异，并分别从感知层、感知-决策层、决策-控制层探讨与道路设计要素相关联的人机功能差异，通过归纳总结智能车辆与道路几何要素、路面性能及其他道路要素(如道路标线)的相互作用机制研究，从道路工程角度及其他道路要素方面回顾该领域的研究现状，指出存在的问题和未来发展方向。研究结果表明：相比传统车辆，配置高等级自动驾驶系统的智能车辆对现役道路设施行驶适应性最高，主动安全系统次之，而驾驶辅助及有条件自动驾驶系统适应性不足。而目前研究主要问题包括：难以归纳、标定不同驾驶自动化等级间的人机功能差异及其对于道路设计参数的需求设计值；测试道路场景条件过于理想，考虑的驾驶自动化等级单一，试验规模和样本有限；道路几何、路面性能以及道路标志、标线等道路要素与智能车辆间的相互作用机制研究不足，缺乏与不同道路场景相匹配的智能车辆驾驶特征数据的获取手段。因此建议：重视并推动与道路设计要素相关联的关键人机功能差异指标信息共享；联合高保真且可交互的道路场景、高精度感知传感器物理模型、车辆动力学模型及微观交通流模型，利用测试场景自动化生成、极限工况场景搜寻与泛化等技术开展智能驾驶虚拟测试，突破现有研究的深度和广度；探索反映不同等级智能车辆的道路行驶适应性特征指标与评价标准，精准、有效地评估预测复杂道路场景及不利道路条件下的行驶适应性。     

基于群决策层次理论的预防性养护方案决策

基于高速公路预防性养护决策方案选择的特性,使用群决策理论的层次分析法,通过对决策组成员意见的集合,得到了各成员动态权重,减少主观误差,提高决策方案结果的客观可靠性。通过案例,将措施费用、行车特征、技术因素、施工因素等作为目标层,对4种备选方案进行分析,得出最佳措施。案例结果证明群决策方法的有效性与可靠性,为选择合理的养护措施提供参考。     

基于职业能力的高职会计实践教学体系的重构

文章通过分析高职会计专业构建实践教学体系的必要性入手，分析会计职业能力的内涵，从会计课程体系、实训项目体系、实训项目教学设计三个方面探索了现代高职会计实践教学体系的构建，拓展会计实践教学的实训资源，完善构建实践教学体系的机制。     

Studying the benefits of carpooling in an urban area using automatic vehicle identification data

Carpooling has been considered a solution for alleviating traffic congestion and reducing air pollution in cities. However, the quantification of the benefits of large-scale carpooling in urban areas remains a challenge due to insufficient travel trajectory data. In this study, a trajectory reconstruction method is proposed to capture vehicle trajectories based on citywide license plate recognition (LPR) data. Then, the prospects of large-scale carpooling in an urban area under two scenarios, namely, all vehicle travel demands under real-time carpooling condition and commuter vehicle travel demands under long-term carpooling condition, are evaluated by solving an integer programming model based on an updated longest common subsequence (LCS) algorithm. A maximum weight non-bipartite matching algorithm is introduced to find the optimal solution for the proposed model. Finally, road network trip volume reduction and travel speed improvement are estimated to measure the traffic benefits attributed to carpooling. This study is applied to a dataset that contains millions of LPR data recorded in Langfang, China for 1 week. Results demonstrate that under the real-time carpooling condition, the total trip volumes for different carpooling comfort levels decrease by 32–49%, and the peak-hour travel speeds on most road segments increase by 5–40%. The long-term carpooling relationship among commuter vehicles can reduce commuter trips by an average of 30% and 24% in the morning and evening peak hours, respectively, during workdays. This study shows the application potential and promotes the development of this vehicle travel mode.     

城市大型医院周边道路交通问题剖析及改善对策——以深圳市为例

为了合理科学组织医院周边及内部交通,避免重现目前深圳大型医院周边普遍存在的交通拥堵、停车困难、进院车辆排队、的士乘坐不便等交通问题,以深圳市为例,分析现状大型医院周边存在的道路交通问题和产生原因,提出完善周边道路交通设施、大力发展公共交通、合理规划医院布局、建立科学有效的交通组织体系等改善对策.     

混凝土在路桥桩基施工中的作用及技术

路桥桩基混凝土施工中，为了保障灌注桩混凝土的质量，必须加强对准备工作及施工工艺的重视。通过对混凝土及其施工质量要求进行分析，探讨了混凝土在路桥桩基施工中的配合比、泵送等，并阐述了路桥桩基施工技术。     

山区漫水桥梁水毁调查分析及重建设计

重点阐述在涞水县7.21灾后公路恢复重建中，对桥梁水毁状况的调查分析以及工程重建设计要点，可为相关工作提供借鉴。     

基于沉降差的填石路堤施工工艺与质量控制研究

结合南方地区填石路堤施工,通过填石路堤试验段研究,介绍了填石路堤的施工工艺和质量控制要求,并通过沉降差检测分析,说明了沉降差作为填石路堤质量控制指标的可行性,为同类工程提供参考.     

递进式项目化教学在公路工程造价课程中的应用

文章通过对现在高职教育改革状况的的分析,论证了道路桥梁技术专业改革的迫切性,主要介绍了递进式项目化教学在公路工程造价课程中的应用。     

Design of tyre force excitation for tyre–road friction estimation

Knowledge of the current tyre–road friction coefficient is essential for future autonomous vehicles. The environmental conditions, and the tyre–road friction in particular, determine both the braking distance and the maximum cornering velocity and thus set the boundaries for the vehicle. Tyre–road friction is difficult to estimate during normal driving due to low levels of tyre force excitation. This problem can be solved by using active tyre force excitation. A torque is added to one or several wheels in the purpose of estimating the tyre–road friction coefficient. Active tyre force excitation provides the opportunity to design the tyre force excitation freely. This study investigates how the tyre force should be applied to minimise the error of the tyre–road friction estimate. The performance of different excitation strategies was found to be dependent on both tyre model choice and noise level. Furthermore, the advantage with using tyre models with more parameters decreased when noise was added to the force and slip ratio.