T型接头横向埋藏裂纹扩展特性

基于断裂力学理论和有限元分析,研究T型接头横向埋藏裂纹扩展特性,实现了双向拉伸载荷作用下T型接头横向埋藏裂纹扩展形状变化的数值模拟。结果表明:T型接头横向埋藏裂纹扩展至结构表面时的形状为近圆形,与裂纹埋藏位置和初始形状无关;埋藏于焊趾端部板材中的裂纹扩展快于埋藏于焊缝中的裂纹扩展。     

复合材料船舶帽型加筋结构静力分析

分析不同截面形状和不同铺层方案对复合材料帽型加筋结构最大位移的影响。分别采用Beam188,Beam189,Shell99单元模拟矩形截面帽型加筋梁结构,结果显示建立整船模型时可以采用梁单元代替壳单元模拟复合材料帽型加筋梁的方法来简化建模。同时还研究不同铺层、不同铺设角、不同截面形状对帽型骨材每一层等效应力的影响,为复合材料船舶帽型加筋结构的计算和设计提供参考。     

简支变连续梁法加固多跨T梁桥效应分析

多跨简支T梁变连续加固措施是多跨简支T梁桥加固改造、提高承载能力的行之有效的方法.但实践中发现该方法存在着一定的问题.以跨径为16.76m+16.76m的两跨简支T梁为例,通过理论分析计算表明,该方法在提高跨中抗弯承载能力的同时,却降低了中间支点处梁的抗剪承载能力.建议在采用此方法加固多跨简支T梁的同时应对中间支点梁的抗剪能力进行加固.     

日本ITS开发和运用的实例--名古屋基于浮动车信息的P-DRGS简介

简要介绍了日本最近开发的一个先进的车辆导航系统——名古屋基于浮动车信息的动态路径引导系统(P-DRGS)。分别从系统的开发历程和计划,系统的构成、特点以及实用化四个方面介绍了P-DRGS的概况,从而在一定程度上折射出日本ITS发展的历程和值得我国借鉴的经验。     

山钢莱芜分公司专用铁路编组站改造方案研究

专用铁路编组站改造是山东钢铁股份有限公司莱芜分公司新旧动能转换项目的控制工程之一,对于铁路运输组织、站场设施管理工作的提升具有重要意义.在阐述既有莱钢编组站站场设施和运输组织现状的基础上,结合钢铁新旧动能转换工程规划,分析莱钢编组站目前存在的无贯通正线、到发线有效长不足、卸车线有效长不足、站坪坡度超限等问题,提出莱钢编...     

大跨悬索桥主缆线形解析迭代法研究

基于悬索桥在恒载作用下的受力特点,建立了主缆线形控制计算的解析迭代方法,以此确定主缆无应力长度、成桥线形、空缆线形。算例结果表明该解析法具有适合程序计算、收敛速度快、计算精度高的特点,可用于悬索桥设计与施工控制计算。     

基于粒子群算法的水下多元线阵阵形有源校正方法

针对存在阵元位置误差的水下多元线阵,提出一种基于粒子群优化算法的远场有源阵形校正方法.该方法选用2个辅助源分时工作方式,利用无条件最大似然方位估计算法构建目标函数,并通过粒子群算法对阵元位置进行寻优.利用该方法对均匀线阵进行性能仿真实验.结果表明:该方法稳健性好、校正精度高,具有一定的应用前景.     

Experiment of boundedly rational route choice behavior and the model under satisficing rule

In this paper, we study the boundedly rational route choice behavior under the Simon’s satisficing rule. A laboratory experiment was carried out to verify the participants’ boundedly rational route choice behavior. By introducing the concept of aspiration level which is specific to each person, we develop a novel model of the problem in a parallel-link network and investigate the properties of the boundedly rational user equilibrium (BRUE) state. Conditions for ensuring the existence and uniqueness of the BRUE solution are derived. A solution method is proposed to find the unique BRUE state. Extensions to general networks are conducted. Numerical examples are presented to demonstrate the theoretical analyses.     

Database of sail shapes versus sail performance and validation of numerical calculations for the upwind condition

A database of full-scale three-dimensional sail shapes is presented with the aerodynamic coefficients for the upwind condition of International Measurement System (IMS) type sails. Three-dimensional shape data are used for the input of numerical calculations and the results are compared with the measured sail performance. The sail shapes and performance were measured using sail dynamometer boat Fujin. This is a boat of 10.3-m length overall in which load cells and CCD cameras were installed to simultaneously measure the sail forces and shapes. At the same time, the sailing conditions of the boat, e.g., boat speed, heel angle, wind speed, and wind angle, were measured. The sail configurations tested were: mainsail with 130% jib, mainsail with 75% jib, and mainsail alone. Sail shapes were measured at several vertical positions for the shape parameters defined by: chord length, maximum draft, maximum draft position, entry angle at the luff, and exit angle at the leech, all of which finally yield three-dimensional coordinates of the sail geometry. The tabulated shape data, along with aerodynamic coefficients, are presented in this article. In addition, numerical flow simulations were performed for the measured sail shapes and the sailing conditions to investigate the capability and limitations of the methods through detailed comparison with the measurements. Two numerical methods were used: a vortex lattice method (VLM) and a Reynolds-averaged Navier–Stokes (RANS)-based computational fluid dynamics method. The sail shape database, in association with the numerical results, provides a good benchmark for the sail performance analysis of the upwind condition of IMS type sails.     

T型焊接接头疲劳性能研究

T型焊接接头在船舶与海洋工程结构中广泛应用,研究T型焊接接头的疲劳性能对于提高船舶与海洋工程结构的强度具有重要意义.针对工程中常用的四种焊趾形式的T型焊接接头,利用有限元计算和模型试验两种方法对其疲劳性能进行了研究.结果表明,平面型焊趾是较优的T型接头焊趾形式.