水力数值模型在合流污水一期系统中的运用与研究

该文根据水文学、水力学和计算机模拟技术的发展,通过计算机水力模型技术,对上海合流一期排水系统运行进行模拟,提出系统内相关泵站的运行优化方案。然后经过现场实际检验,获得了合理的控制方式,使整个系统更高效、更稳定地运行。     

船用开关电源的研究与设计

针对船舶环境,对元器件进行严格选型,专门设计了此款开关电源。测试结果表明,它的优势包括输出电压的调节范围大、干扰纹波小以及电能变换效率高。此外,当输出电流过大时,能够自动把输出电压拉低,自动进行过流保护。当过流状态消失时,电源能够自动恢复到正常供电状态。     

Development of simplified method for prediction of structural response of stiffened plates under explosion loads

During their lifetime, marine structures may be exposed to accidental loadings such as from collisions or explosions, as well as environmental loadings such as from slamming, sloshing and green water. Such loadings can cause damage to structures. Therefore, to minimize such damage, advanced and robust design guidelines should be formulated. Among those loads, in this study, explosions imparting an impulsive pressure loading containing a rapid increase in pressure and a short duration that can cause serious casualties, property losses, and marine pollution were considered. In this paper, a practical and robust method for damage assessment of marine structures exposed to explosion loads based on a single degree of freedom (SDOF) system and numerical simulations is proposed. The SDOF method was improved by introduction of new and better idealization resistance for the system and consideration of the effect of strain-rate, and subsequently was verified by a numerical method developed using the commercial ABAQUS software package. The numerical method was itself validated by comparison with relevant pulse pressure test data available in the open literature (good correlation was shown). Based on the validated numerical models, a rigorous parametric study of the structural response of stiffened plates having actual scantlings of offshore structures was performed. The numerically obtained maximum deformations were compared with the results from the improved SDOF method in a parametric study, and the variation of both methods was verified. Finally, simple yet accurate and reliable formulations for prediction of structural response were empirically derived. These formulations are expected to be usefully employed as a first-hand tool for prediction of damage extent of marine structures (including offshore structures) due to explosion loads.     

风险分析计算机模拟方法论

本文给出并阐述面向投资风险分析的计算机模拟新方法。在定义风险模拟基本模型的基础上，重点对讨论对传统投资风险分析模型的修正与扩充 风险分析判据的模拟估计方法，不同投资方案的模拟比较方法以及投资风险分析的计算机图形描绘与动画模拟。本文所述方法更能接纳和描术投资风险分析产生了不确定性影响的各种随机因素，对风险的估计和推断更为细致和准确。     

避免管理信息系统（MIS）建设失败的途径

在概述国内ＭＩＳ建设失败的类型，分析导致ＭＩＳ失败的原因基础上，提出了若干避免ＭＩＳ建设失败的技术性和非技术性途径。     

基于PCI总线智能通讯系统的设计与实现

描述了一种基于PCI总线的实时智能通讯系统的设计以及实现，应用了嵌入式微控制器AMl86CC以及PCI目标设备接口芯片AMCCS5920。并设计相关逻辑控制上位机(PCI总线)与下位机(局部总线)的数据交换以及外部通信，充分利用了PCI总线的高效能和嵌入式通讯控制器的强大功能，并设计出基于VxWorks的配套设备驱动程序，使系统更加完善。     

不同闭塞方式下城轨列车追踪运行过程及其仿真系统的研究

介绍了城市轨道交通不同信号闭塞方式及其追踪列车间隔时间的计算方法,建立了多列车追踪运行的仿真系统,并进行了算例的设计。在算例中,通过对两列车在固定闭塞、准移动闭塞、移动闭塞方式下的追踪运行模拟,分析了不同闭塞方式下列车追踪运行的效果,同时利用仿真系统对最小追踪列车间隔时间进行了验算,并得出相同发车间隔情况下不同信号闭塞方式的列车追踪运行结果以及三种闭塞方式条件下最小追踪列车间隔时间的计算结果。该系统可以为科研、设计人员进行城市轨道交通列车安全间隔及通过能力等方面的研究提供便利条件。     

地铁车辆诊断通信网中央故障存储装置机理的分析

介绍了地铁车辆诊断通信网中央故障存储装置的结构，分析了它的工作原理，阐述了中央故障存储装置与列车总线以及车辆总线间的数据通信过程，文章最后还介绍了诊断通信网的抗干扰技术，这些技术很有实用价值，可用于高速列车和城市轨道交通车辆的诊断系统中。     

地铁车辆站名动态显示系统的设计和应用

介绍一种基于专用语音识别芯片HM2007的地铁车辆乘车站名动态显示系统,在车辆不作任何改动的基础上实现语音报站与显示的同步。     

基于ZPW-2000A区间模拟控制系统的研究

基于我国铁路区间广泛使用的ZPW-2000A无绝缘移频自动闭塞制式,利用计算机仿真技术对区间的部分设备及功能进行了模拟.本系统具有区间列车模拟运行,可以实现计算机对低频、载频的控制,地面信号、车载信号模拟,区间移频信号的采集,模拟示波器显示各种信息以及对移频信号作频谱分析等.