On Safety in Dismantling Temporary Strut of Super-large Tunnels with Double-layer Primary Support北大核心CSCD

More and more multiple-track tunnels and super-large section tunnels have been built, and disman- tling of temporary strut is a weak point of the whole structure during force transfer when the secondary lining is con- structed. It is significant to guarantee structure safety during dismantling of temporary strut. Little systematic re- search on safety in dismantling of temporary strut of the super-large section tunnel with double-layer primary support has been conducted, so the internal force and security of the two-layer primary support of the Xinkaotang tunnel were analyzed by a numerical analysis and site measurement, and it proves the effect of two-layer primary support on the safety during strut dismantling. The research results indicate that: (1) with constant support thickness and one-time longitudinal dismantling length, the safety factor of secondary primary support is larger than that of the first primary support, and the safety factor of the first primary support is larger than that of the single-layer primary support. Change range of safety factor for the first primary support is smaller than that of the single-layer primary support, and the safe factor for the single-layer primary support is smaller than that of the secondary primary support; (2) with the same support pattern, the safety factors increase firstly and then decrease with an increase of the onetime dismantling length. The calculated results of various cases show that the reasonable one-time dismantling length for this project is about 9 m. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

水平旋喷桩施工工艺在深圳地铁施工中的应用

在深圳地铁安托山站—侨香站区间矿山法隧道超前支护施工中,由于采用了水平旋喷桩施工工艺,成功地解决了安-侨区间暗挖隧道在饱和粉细砂层及砾砂层中近距离穿越大断面雨水箱涵及φ500 mm次高压燃气管线的难题,节约了施工成本,充分显示了水平旋喷桩施工工艺在富水砂层浅埋暗挖隧道开挖预支护工程应用上的经济优势。文章论述了水平旋喷桩的工艺机理、适应性、优缺点以及在该工程中的应用效果。     

三岸邕江特大桥悬臂拼装钢桁拱施工监控方法

文章结合三岸邕江特大桥工程实例,对比分析了悬臂拼装钢桁拱的施工监控特点,阐述了悬臂拼装钢桁拱施工监控的主要内容及组织实施流程。     

缆索吊装系统在钢桁架拱桥上构施工中的应用

文章以新世纪大桥主桥钢桁架上构施工为例,对施工所需缆索吊装系统的承重主索、塔架、地锚、扣挂体系进行了介绍,并阐述了利用缆索吊装系统进行钢桁架拱桥上构施工的工艺流程及技术要点。     

广西洛维大桥主桥箱梁加固设计方案

文章以广西洛维大桥为研究对象,介绍了该桥主桥箱梁存在的主要病害,分析了病害产生的原因,提出了针对性的加固方案,并通过结构验算验证了方案的可行性,为今后类似桥梁的加固改造施工提供技术参考。     

分离式桥现浇连续箱梁钢管支架施工方案

文章以陈家田分离式桥现浇连续箱梁满堂钢管支架施工为例,介绍了在山区软质地基上进行现浇预应力连续箱梁满堂钢管支架施工的总体布置方案,并通过支架力学检算验证了施工方案的可行性,同时阐述了支架地基处理、支架装拆及加载预压等施工过程。     

基于支持向量机的多传感器船舶火灾探测技术

针对船舶火灾探测误报率高的情况,为提高火灾探测系统的可靠性,提出一种基于支持向量机的多传感器火灾信息融合方法。经过仿真试验证明,通过多传感器探测数据的有效融合,可以大幅提高火灾探测系统的火灾识别率。     

超大型油船新型防泥沙设计

压载舱中的泥沙不仅会对船舶双层底产生额外载荷,还会加速底部构件腐蚀,妨碍检查,而清除淤泥一直是令船东和船员们头痛的难题。文章主要介绍应用于超大型油船VLCC的4种新型防泥沙设计概念,并分析这些设计对船舶设计、审核和建造的影响,重点关注了防泥沙设计中涉及的船体梁设计载荷和局部强度。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

高埋深软硬岩互层地质条件下敞开式TBM岩爆段施工方法研究

基于喜马拉雅山区域某软硬岩性互层地质条件下的深埋隧洞工程,为解决该区域TBM施工过程中的岩爆问题,统计分析了TBM施工过程中的岩爆特征;在施工过程中开展了多种岩爆规避试验,形成了一套较完整的有针对性的施工方法： 1）岩爆风险巡查常态化; 2）超前地质预报和超前处理措施相结合; 3）支护材料和支护方式合理化; 4）掘进参数动态调整。在后续的施工中加以应用,取得了较好的效果,可以为类似地质条件下的安全施工提供参考。