应用固有应变法计算焊接变形时材料模型的选择研究

分别采用理想弹塑性模型和双线性强化模型,推导出各自的固有应变计算公式,研究不同材料模型对于焊接结构变形的影响。研究结果表明,两种固有应变计算公式所预测的变形结果之间相对误差较小,即不同材料模型的选择对预测结构焊接变形的影响可以忽略。     

整体温差作用下高桩码头基桩内力计算方法

为研究高桩码头完建后整体温差对基桩内力的影响,结合工程实例,建立三维有限元模型,对上部平台温变规律进行分析,认为斜桩、直桩对上部平台温变约束作用均可忽略不计,平台处于自由温变状态,存在水平位移为零的温变发散中心。基于刚性平台自由温变规律,提出了考虑斜桩码头平动扭转的三维算法,三维算法的桩顶位移、内力与有限元结果接近。对于全直桩或近似对称的斜桩码头,还可简化为平动的二维算法。并给出了直桩、斜桩内力的估算简式,由估算式可知,位于发散同心圆上的直桩内力大于斜桩内力,桩顶轴力、弯矩与桩径2次、4次方成正比,桩径对温差内力的影响显著。     

Analysis on the Characteristics and Development Trends of the Support Technology of High Ground Stress Tunnels in China北大核心CSCD

Combining the present situation and development trend of different tunnel support technologies at home and abroad, this paper analyzes the problems of rockburst in hard rock tunnels and large deformation in soft rock tunnels caused by high ground stress. It is concluded that: 1) regarding the rockburst problem, the current support technology is mainly influenced by the rock burst mechanism which is dominated by static factors, and so the used support components are generally of smaller deformation performance and "passive support" properties; 2) as the rockburst is the result of dynamic-static stress coupling, and only the anchor bolt has the "active support" attribute in the current "shotcrete+anchor bolt+wire net" support system, so the best support system should have the two functions of active support and energy release in terms of the rockburst problem, and the key focus of the research and development is anchorage members; 3) there are three main support types for large deformation in soft rock tunnels, e.g. the heavy support, layered support and yielding support. Among them, the heavy support system in underground cavern with large deformation is easy to induce excessive surrounding rock pressure, and so the applicable conditions are limited. The layered support system is still not the best choice due to its immature theoretical study, difficult determination of the thickness value and the installation time of each support layer and the interference to construction progress. With the characteristics of timely support and yielding while supporting, the yielding support system can give full play to the performance values of surrounding rocks and supporting materials, and make both of them reach the optimal state, so it is the best choice for supporting the soft rock tunnels with large deformations. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

Analysis of Ground Response and Structure Stress Induced by PBA Method北大核心CSCD

The application of prefabricated tunnel technology has been become a new research field both in China and abroad. Based on the running tunnel between Yufuhe station and Wangfuzhuang station of Jinan rail transit line R1, a new prefabricated tunnel construction technology, the PBA method is presented. This paper makes a detailed discussion on section form, supporting scheme and construction process of the PBA method. In this study, 3D a new 3D numerical model for PBA method is presented by finite difference numerical simulation software Flac and the construction processes are modeled. The rule of ground surface settlement, ground deformation and structural stress caused by PBA method is studied in detail. Results show that the structure of PBA method can effectively control the deformation magnitude and scope. Stress concentration appears at the prefabricated connection parts and the reinforcement needs to check. The total assembled structure forms the load-bearing system after the completion of the lateral wall. The built-in depth of the precast pile and pile bottom grouting quality should to be ensured to control the displacement of the precast piles. The results of this study will be a useful reference for similar projects in the future. © 2018, Editorial Office of "Modern Tunnelling Technology". All right reserved.     

板裂围岩结构弯曲失稳分析

文章分析了板裂结构地质背景及板裂介质岩体特征,研究了板裂围岩破坏模式及力学机理,并结合工程实例,利用随机有限元模型对板裂结构屈曲破坏进行分析。     

软弱围岩隧道修建新方法——核心土加固变形控制法

2006年我国铁路系统相关施工单位开始接触变形控制法隧道施工技术,经过长达5年的基础理论学习研究与准备,在铁道部和兰渝铁路公司的支持下,2011年由中铁瑞威公司和意大利土力公司联合在兰渝铁路桃树坪隧道进行了中国首次隧道核心土加固变形控制法应用试验研究,并取得成功。文章通过工程实践,对桃树坪隧道的工程概况、地质问题、施工工艺、施工设备及核心土加固控制变形技术的应用效果作了较详细介绍。     

舰艇典型分段焊接工艺仿真及其变形规律分析

针对舰艇分段结构采用不同的装焊工艺顺序,会出现不同的焊接变形的问题,以某舰艇256#分段焊接的整体最小变形量为目标,基于热弹塑性和固有应变理论,对该分段焊接常用的六种不同焊接工艺顺序,采用ABAQUS有限元软件进行焊接变形数值仿真;对比六种不同的方案计算结果表明,舰艇分段焊接采用C方案以矩形块为单位,由中间向两端对称焊接、从船中向两舷焊接横向和纵向构件的工艺顺序,该分段整体变形量为最小,为最优焊接工艺顺序方案。     

软岩隧道三维扫描变形监测技术的试验研究

为解决传统监测技术单点监测无法满足软岩隧道整体性变形监测的局限性,采用三维激光扫描技术进行软岩隧道整体性变形监测试验,从隧道结构的变形时间、变形空间分布及变形量进行整体分析。首先建立全站仪和三维激光扫描仪测量误差模型,分析三维扫描监测技术与传统隧道监测技术的特点,通过平面标靶和棱镜靶球精度试验得出平面标靶最佳入射角范围小于60°,棱镜靶球自动提取距离不大于45 m,作为测站设置和控制点布设的依据; 然后以渭武高速木寨岭隧道2号斜井工程为依托,开展软岩隧道三维扫描变形监测技术的试验研究。研究结果表明： 中台阶开挖支护前已发生较大变形,最大变形位置为左侧上台阶与中台阶交界处,空间分布呈左大右小,试验段最大累计变形达0.48 m,下台阶及时封闭成环及2层初期支护有利于变形控制。     

丽香铁路黄山哨隧道下穿岩堆段设计施工关键技术

以下穿岩堆段的丽香铁路黄山哨隧道为工程依托,对岩堆段地表开裂及洞内初期支护边墙严重变形的问题进行研究。地表埋设6根测斜管监测地表位移情况,洞内布置3个断面进行围岩压力、钢架内力、二次衬砌内力、初期支护与二次衬砌间的接触压力、锚杆轴力量测。在分析现场岩堆段洞内外受力机制及原因的基础上,根据数值计算结果优化二次衬砌断面型式及进一步加大二次衬砌厚度及配筋。采取以下措施控制隧道岩堆段变形： 1）地表岩堆土石接触面开裂处增设截排水措施; 2）加大隧道初期支护钢架型号及加长岩堆侧边墙径向系统锚杆; 3）加大隧道边墙轮廓曲率并优化隧道二次衬砌型式为圆顺型; 4）隧道预留变形量加大至30 cm; 5）隧道二次衬砌内净空预留50 cm补强空间; 6）隧道拱部设置42小导管超前支护。现场岩堆段采取以上措施后已顺利施工通过,根据洞内外监测结果显示,结构在安全可控范围内。     

季节性冻土区路基专用太阳能主动供热装置研究

基于季节性冻土区路基冻胀特征及供热需求分析,设计1款采用太阳能主动供热的路基专用供热装置.通过模型试验分析装置供热温度、供热量、供热效率随太阳辐照量的变化规律,建立考虑纬度和日序数的供热温度预测公式.通过对路基长期供热效果的数值模拟分析,研究装置防冻胀效果.结果 表明:路基专用供热装置供热温度随太阳辐照量的提高而增大,...