����GIS-T�Ľ�ͨ���� �ۺ���Ϣƽ̨�ļܹ����

交通地理信息系统(GIS-T)，来源于地理信息系统和交通信息系统的集成．本文在工程实践的基础上，系统地阐述了基于GIS-T的交通管理综合信息平台的架构设计．本系统的建设目标是，研究开发为交通管理综合信息平台服务的智能交通地理信息系统(GIS-T)，建成一个基于网络环境的、实时的、可视化的交通管理地理信息服务平台．基于此，分别从交通地理信息系统的功能上、系统的体系结构以及系统的软件、硬件设计等方面进行了较为全面深入的研究，为进一步深入开发与研究交通管理综合信息平台从一定程度上奠定基础．     

Weather and road geometry impact on longitudinal driving behavior: Exploratory analysis using an empirically supported acceleration modeling framework

The objective of this paper is to quantify and characterize driver behavior under different roadway geometries and weather conditions. In order to explore how a driver perceives the rapidly changing driving surrounding (i.e. different weather conditions and road geometry configurations) and executes acceleration maneuvers accordingly, this paper extends a Prospect Theory based acceleration modeling framework. A driving simulator is utilized to conduct 76 driving experiments. Foggy weather, icy and wet roadway surfaces, horizontal and vertical curves, and different lane and shoulder widths are simulated while having participants driving behind a yellow cab at speeds/headways of their choice. After studying the driving trends observed in the different driving experiments, the extended Prospect Theory based acceleration model is calibrated using the produced trajectory data. The extended Prospect Theory based model parameters are able to reflect a change in risk-perception and acceleration maneuvering when receiving different parameterized exogenous information. The results indicate that drivers invest more attention and effort to deal with the roadway challenges compared to the effort to deal with the weather conditions. Moreover, the calibrated model is used to simulate a highway segment and observe the produced fundamental diagram. The preliminary results suggest that the model is capable of capturing driver behavior under different roadway and weather conditions leading to changes in capacity and traffic disruptions.     

Deriving macroscopic fundamental diagrams from probe data: Issues and proposed solutions

Well-defined relationships between flow and density averaged spatially across urban traffic networks, more commonly known as Macroscopic Fundamental Diagrams (MFDs), have been recently verified to exist in reality. Researchers have proposed using MFDs to monitor the status of urban traffic networks and to inform the design of network-wide traffic control strategies. However, it is also well known that empirical MFDs are not easy to estimate in practice due to difficulties in obtaining the requisite data needed to construct them. Recent works have devised ways to estimate a network’s MFD using limited trajectory data that can be obtained from GPS-equipped mobile probe vehicles. These methods assume that the market penetration level of mobile probe vehicles is uniform across the entire set of OD pairs in the network; however, in reality the probe vehicle market penetration rate varies regionally within a network. When this variation is combined with the imbalance of probe trip lengths and travel times, the compound effects will further complicate the estimation of the MFD.To overcome this deficit, we propose a method to estimate a network’s MFD using mobile probe data when the market penetration rates are not necessarily the same across an entire network. This method relies on the determination of appropriate average probe penetration rates, which are weighted harmonic means using individual probe vehicle travel times and distances as the weights. The accuracy of this method is tested using synthetic data generated in the INTEGRATION micro-simulation environment by comparing the estimated MFDs to the ground truth MFD obtained using a 100% market penetration of probe vehicles. The results show that the weighted harmonic mean probe penetration rates outperform simple (arithmetic) average probe penetration rates, as expected. This especially holds true as the imbalance of demand and penetration level increases. Furthermore, as the probe penetration rates are generally not known, an algorithm to estimate the probe penetration rates of regional OD pairs is proposed. This algorithm links count data from sporadic fixed detectors in the network to information from probe vehicles that pass the detectors. The simulation results indicate that the proposed algorithm is very effective. Since the data needed to apply this algorithm are readily available and easy to collect, the proposed algorithm is practically feasible and offers a better approach for the estimation of the MFD using mobile probe data, which are becoming increasingly available in urban environments.     

Using high-resolution event-based data for traffic modeling and control: An overview

Research on using high-resolution event-based data for traffic modeling and control is still at early stage. In this paper, we provide a comprehensive overview on what has been achieved and also think ahead on what can be achieved in the future. It is our opinion that using high-resolution event data, instead of conventional aggregate data, could bring significant improvements to current research and practices in traffic engineering. Event data records the times when a vehicle arrives at and departs from a vehicle detector. From that, individual vehicle’s on-detector-time and time gap between two consecutive vehicles can be derived. Such detailed information is of great importance for traffic modeling and control. As reviewed in this paper, current research has demonstrated that event data are extremely helpful in the fields of detector error diagnosis, vehicle classification, freeway travel time estimation, arterial performance measure, signal control optimization, traffic safety, traffic flow theory, and environmental studies. In addition, the cost of event data collection is low compared to other data collection techniques since event data can be directly collected from existing controller cabinet without any changes on the infrastructure, and can be continuously collected in 24/7 mode. This brings many research opportunities as suggested in the paper.     

Traffic state estimation and uncertainty quantification based on heterogeneous data sources: A three detector approach

This study focuses on how to use multiple data sources, including loop detector counts, AVI Bluetooth travel time readings and GPS location samples, to estimate macroscopic traffic states on a homogeneous freeway segment. With a generalized least square estimation framework, this research constructs a number of linear equations that map the traffic measurements as functions of cumulative vehicle counts on both ends of a traffic segment. We extend Newell’s method to solve a stochastic three-detector problem, where the mean and variance estimates of cell-based density and flow can be analytically derived through a multinomial probit model and an innovative use of Clark’s approximation method. An information measure is further introduced to quantify the value of heterogeneous traffic measurements for improving traffic state estimation on a freeway segment.     

Border crossing delay prediction using transient multi-server queueing models

As a result of the continued increase in travel demand coupled with the need for tighter security and inspection procedures after September 11, border crossing delay has recently become a critical issue with tremendous economic and social costs. The current paper develops multi-server queuing models to estimate border crossing delay in support of a predictive traveler information system for the crossings. Two classes of multi-server models are considered: (1) models with exponential inter-arrival times and Erlang service times; and (2) a more generic model with a Batch Markovian Arrival Process (BMAP) and phase types (PH) services. As a case study, the models are developed based on real-time traffic volume and inspection time data collected at one of the major US–Canada border crossings, the Peace Bridge, and their transient solution is obtained using heuristic methods. For validation, the queueing models’ estimates are compared to the results from a detailed microscopic traffic simulation model of the Peace Bridge border crossing. The comparison shows that the transient queueing model, along its heuristic solution algorithm, is capable of predicting border crossing delay. Finally, a set of sensitivity analysis tests are conducted, and the developed models are incorporated within an optimization framework to help inform border crossing management strategies.     

Time-varying effects of influential factors on incident clearance time using a non-proportional hazard-based model

Incident clearance time is a major performance measure of the traffic emergency management. A clear understanding of the contributing factors and their effects on incident clearance time is essential for optimal incident management resource allocations. Most previous studies simply considered the average effects of the influential factors. Although the time-varying effects are also important for incident management agencies, they were not sufficiently investigated. To fill up the gap, this study develops a non-proportional hazard-based duration model for analyzing the time-varying effects of influential factors on incident clearance time. This study follows a systematic approach incorporating the following three procedures: proportionality test, model development/estimation, and effectiveness test. Applying the proposed model to the 2009 Washington State Incident Tracking System data, five factors were found to have significant but constant (or time independent) effects on the clearance time, which is similar to the findings from previous studies. However, our model also discovered thirteen variables that have significant time-varying impacts on clearance hazard. These factors cannot be identified through the conventional methods used in most previous studies. The influential factors are investigated from both macroscopic and microscopic perspectives. The population average effect evaluation provides the macroscopic insight and benefits long-term incident management, and the time-dependent pattern identification offers microscopic and time-sequential insight and benefits the specific incident clearance process.     

System optimal dynamic traffic assignment: Properties and solution procedures in the case of a many-to-one network

Thanks to its high dimensionality and a usually non-convex constraint set, system optimal dynamic traffic assignment remains one of the most challenging problems in transportation research. This paper identifies two fundamental properties of the problem and uses them to design an efficient solution procedure. We first show that the non-convexity of the problem can be circumvented by first solving a relaxed problem and then applying a traffic holding elimination procedure to obtain the solution(s) of the original problem. To efficiently solve the relaxed problem, we explore the relationship between the relaxed problems based on different traffic flow models (PQ, SQ, CTM) and a minimal cost flow (MCF) problem for a special space-expansion network. It is shown that all the four problem formulations produce the same minimal system cost and share one common solution which does not involve inside queues in the network. Efficient solution algorithms such as the network simplex method can be applied to solve the MCF problem and identify such an optimal traffic pattern. Numerical examples are also presented to demonstrate the efficiency of the proposed solution procedure.     

Age related annual crash incidence rate ratios in professional drivers of heavy goods vehicles

ObjectivesEvidence concerning crash risk for older heavy vehicle drivers is sparse, making it difficult to assess if it is prudent to encourage older drivers to remain in the workforce in a climate of labour shortages. The objective of this study was to estimate annual crash rate ratios of older male heavy vehicle drivers relative to their middle aged peers.MethodsData utilized in this study includes all crashes meeting inclusion criteria involving heavy goods vehicles, categorised as rigid trucks and articulated trucks; this data was recorded by the New South Wales Roads and Traffic Authority. The exposure to the risk of a crash was represented by distance travelled for each vehicle type and year, by age of driver, as estimated by the Australian Survey of Motor Vehicle Use. Negative binomial regression modelling was applied to estimate annual crash incidence rate ratios for male drivers in various age groups.ResultsA total of 26,146 crashes occurred in New South Wales during 1999–2006, involving a total of 54,191 vehicles; removing observations that did not meet the inclusion criteria, 19,736 observations remained representing 12,501 crashes. For rigid trucks, the incidence rate ratio for drivers aged 65+ years, compared to 45–54 year olds, was 0.74 (95% CI 0.51, 0.98). For articulated trucks, the annual crash incidence rate ratio for drivers aged 65+ years compared to 45–54 year olds was 1.4 (95% CI 0.96, 1.9), and that for drivers aged 55–64 years compared to 45–54 year olds was 1.1 (95% CI 0.83, 1.3).ConclusionsOlder male professional drivers of heavy goods vehicles have lower risk of crashes in rigid vehicles, possibly due to accrued driving experience and self-selection of healthy individuals remaining in the workforce. Thus, encouraging these drivers to remain in the workforce is appropriate in the climate of labour shortages, as this study provides evidence that to do so would not endanger road safety.     

A GIS‐based traffic analysis zone design: implementation and evaluation

The purpose of this paper is to implement an efficient method for GIS‐based traffic analysis zone (TAZ) design in order to evaluate and validate such a method. The method was developed by the authors.

Moran's I spatial autocorrelation coefficient and sample variance are used for evaluating the generated TAZs using the Champaign‐Urbana, IL region as a case study. Sensitivity analysis is also conducted to explore the fluctuations in TAZ generation outcomes. The evaluation, the validation as well as the TAZ design have been implemented with ARC/INFO GIS software on a UNIX workstation platform.