Modeling free-flow speed according to different water depths—From the viewpoint of dynamic hydraulic pressure

In this paper, we propose a method of modeling free flow speed from the viewpoint of hydroplaning. First, the lift forces for different water depths were estimated using Bernoulli’s equation. Compared with the result of the experimental test performed by the Japan Automobile Research Institute, the hydrodynamic pressure coefficient was determined to be 0.03 (tf s²/m⁴). The validation of the predicted lift force is found in another published paper. A very good match is found between the computed values by the proposed numerical model and the data in other published papers. Then, the loss of contact force is considered to evaluate the hydroplaning performance of a tire. To simulate the hydroplaning speed, a tire-sliding model was utilized to obtain the traction and friction forces between the road surface and the tire. The observation data obtained in Japan in 2009 is compared with the physically computed hydroplaning speed, yielding the conclusion that the traction force at the measured desired speed is, on average, 23.4% of the traction force at hydroplaning speed. The analytical model offers a useful tool to quantitatively show that the free flow speed changes as the water depth increase.     

Bottleneck congestion and distribution of work start times: The economics of staggered work hours revisited

Since the seminal work of Henderson (Henderson, J.V., 1981. The economics of staggered work hours. Journal of Urban Economics 9 (3), 349–364), a number of studies have examined the effect of staggered work hours by analyzing models of work start time choice that consider the trade-off between negative congestion externalities and positive production externalities. However, these studies employed flow congestion models to describe traffic congestion. This study develops a model of work start time choice with bottleneck congestion and discloses the intrinsic properties of the model. To this end, this study extends Henderson’s model to incorporate bottleneck congestion. By utilizing the properties of a potential game, we characterize equilibrium and optimal distributions of work start times. We also show that Pigouvian tax/subsidy policies generally yield multiple equilibria and that the first-best optimum must be a stable equilibrium under Pigouvian policies, whereas the second-best optimum in which policymakers cannot eliminate queuing congestion can be unstable.     

水润滑橡胶轴承板条型式及硬度分区对接触性能影响研究

轴承硬度分区设计思想的提出,为改善轴承接触性能提供了新思路。板条式水润滑橡胶应用广泛,针对凹面型、平面型、凸面型三种不同的板条型式,结合硬度分区设计的思想,对板条型式及硬度分区对接触陛能的影响进行了研究。建立了未进行硬度分区和分区后三种板条型式下的轴段与轴承有限元接触模型,对比分析了三种不同板条型式下硬度分区对接触性能的影响效果。结果表明,硬度分区能显著改善轴承的接触性能,凹面型板条型式的静态接触性能较佳。     

Variational principles in water-wave problems (wave radiation conditions and their variational treatment)

To discuss water-wave problems in unlimited waters, it is important to know what type of wave radiation condition should be placed on a virtual surface corresponding to infinity. For this kind of problem, the Sommerfeld radiation condition is well known. In this article, the condition is extended to treat a case with an incident wave. Furthermore, a more general wave radiation condition is introduced from a different point of view. The above-mentioned wave radiation conditions are introduced into the variational principles of the Kelvin, Hellinnger–Reissner, and Dirichlet type. The Dirichlet-type variational principles are then used in numerical calculations for bending waves in a bar, and the effectiveness of the wave radiation conditions and the variational principles is shown. The numerical results for one-dimensional water-wave problems are then given. As expected, the region required for the numerical solution is reduced drastically compared with that required by the Sommerfeld-type formulation. Furthermore, the amplitude of the diverging wave is obtained in the process of reaching the variational solution. Finally, two-dimensional water-wave problems are briefly discussed. Received: August 9, 2001 / Accepted: September 17, 2001     

带整流负载同步发电机稳定性研究

采用将带整流负载同步发电机中各变量的d、q轴低频分量和高频分量分别加以处理的方法,得出了带整流负载三相同步发电机的等效电路模型,以及小扰动条件下三相同步发电机整流系统的稳定条件,并通过试验加以验证,得到了阻尼绕组不能改善带整流负载同步发电机系统运行稳定性的结论。     

船舶压载水处理技术和监督管理研究

船舶压载水不仅危害海洋环境还会对人类健康、当地经济造成影响,《国际船舶压载水和沉积物控制和管理公约》实施即说明了国际社会对此的重视。压载水处理系统的使用,有效地减小了压载水对环境的危害。然而在实际应用中,仍需要通过提高和改进压载水监控技术,使处理后的压载水进一步符合公约标准。本研究根据我国压载水监控现状,提出完善压载水监督管理的措施,促进我国环境、经济和资源的可持续发展。     

《汽车电子稳定系统》信息化教学设计

文章以高职汽车类专业平台课程《汽车构造》课程中的工作任务--《汽车电子稳定系统》教学设计为例,理论与实践相结合研究《汽车构造》课程信息化教学设计,从教学分析、教学策略、教学实施、教学反思四方面阐述设计过程,实际教学效果良好,教学特色鲜明,对信息化教学的推广,具有启示与借鉴意义。     

长洲水利枢纽坝下航道维护新问题及对策分析

文章通过分析长洲水利枢纽坝下水文条件改变给航道维护带来的影响,介绍广西梧州航道管理局针对维护新问题所采取的对策,指出今后该航段航道维护应重点注意的事项。     

百色-罗村口高速公路百康村滑坡稳定性分析

文章结合百色-罗村口高速公路百康村滑坡区的工程地质概况,分析了百康村滑坡的形成机理,并采用传递系数法对滑坡的稳定性进行了探讨,提出了相应的综合处治方案。     

穿越古滑坡川主寺隧道围岩破坏特征及稳定性研究

文章以川主寺隧道所处的工程地质条件为基础,通过现场调研分析了隧道围岩变形破坏形式主要为坍塌、掉块以及剥落.围岩稳定性三维有限元数值模拟结果显示,碎裂围岩自稳能力差,围岩变形以弹塑性变形、松弛变形为主;H型钢拱架支护结构对碎裂围岩稳定性起到积极的作用,并通过典型洞段现场位移监测数据分析结果得以证实.